sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
42e53465b1
nuttx/configs/stm32f746g-disco/netnsh/defconfig

90 lines
2.3 KiB
Plaintext
Raw Normal View History

tools/Makefile.unix, .win, and all defconfig files: Modify tools/Makefiles to add warning on defconfig files
2019-03-03 15:30:14 +01:00
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
# CONFIG_ARCH_FPU is not set
configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port)
2018-02-19 21:38:22 +01:00
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="stm32f746g-disco"
CONFIG_ARCH_BOARD_STM32F746G_DISCO=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_CHIP_STM32F746NG=y
CONFIG_ARCH_CHIP_STM32F7=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port)
2018-02-19 21:38:22 +01:00
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_BOARD_LOOPSPERMSEC=43103
CONFIG_BUILTIN=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DISABLE_POLL=y
CONFIG_ETH0_PHY_LAN8742A=y
CONFIG_FS_PROCFS=y
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
CONFIG_FS_PROCFS_REGISTER=y
configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port)
2018-02-19 21:38:22 +01:00
CONFIG_HAVE_CXX=y
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
CONFIG_HAVE_CXXINITIALIZE=y
configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port)
2018-02-19 21:38:22 +01:00
CONFIG_INTELHEX_BINARY=y
libs/unistd and other affected files: Hostname support no longer depends on CONFIG_NET since the host name is also useful in the non-network environment. CONFIG_NET_HOSTNAME changed to CONFIG_LIB_HOSTNAME.
2019-01-27 13:56:16 +01:00
CONFIG_LIB_HOSTNAME="stntest"
configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port)
2018-02-19 21:38:22 +01:00
CONFIG_MAX_TASKS=16
CONFIG_MAX_WDOGPARMS=2
CONFIG_MM_REGIONS=3
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
CONFIG_NET=y
CONFIG_NETDB_DNSCLIENT=y
configs: Update all configurations to account for the configuration changes resulting from the separation of network initialization logic from NSH.
2019-04-29 18:03:41 +02:00
CONFIG_NETINIT_DHCPC=y
CONFIG_NETINIT_NETMASK=0xfffffe00
CONFIG_NETINIT_NOMAC=y
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
CONFIG_NETUTILS_DHCPC=y
CONFIG_NETUTILS_DISCOVER=y
configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port)
2018-02-19 21:38:22 +01:00
CONFIG_NET_ARP_IPIN=y
CONFIG_NET_ARP_SEND=y
CONFIG_NET_BROADCAST=y
This commit attempts remove some long standard confusion in naming and some actual problems that result from the naming confusion. The basic problem is the standard MTU does not include the size of the Ethernet header. For clarity, I changed the naming of most things called MTU to PKTSIZE. For example, CONFIG_NET_ETH_MTU is now CONFIG_NET_ETH_PKTSIZE. This makes the user interface a little hostile. People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header). A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length. Instead, we define the packet buffer size then derive the MTU. The MTU is not common currency in networking. On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP). Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes. So we should be all good and without the recurring 14 byte error in MTU's and MSS's. Squashed commit of the following: Trivial update to fix some spacing issues. net/: Rename several macros containing _MTU to _PKTSIZE. net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes). net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes). net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE. This is not the MTU which does not include the size of the link layer header. This is the full size of the packet buffer memory (minus any GUARD bytes). net/: Rename the file d_mtu in the network driver structure to d_pktsize. That value saved there is not the MTU. The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header. The MTU does not include the link layer header.
2018-07-04 22:10:40 +02:00
CONFIG_NET_ETH_PKTSIZE=1500
configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port)
2018-02-19 21:38:22 +01:00
CONFIG_NET_ICMP=y
CONFIG_NET_IGMP=y
CONFIG_NET_ROUTE=y
CONFIG_NET_SOCKOPTS=y
CONFIG_NET_SOLINGER=y
CONFIG_NET_TCP=y
CONFIG_NET_UDP=y
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
CONFIG_NET_UDP_CHECKSUMS=y
configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port)
2018-02-19 21:38:22 +01:00
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_DISABLE_IFUPDOWN=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
CONFIG_NSH_READLINE=y
CONFIG_PIPES=y
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_PREALLOC_TIMERS=4
CONFIG_PREALLOC_WDOGS=4
CONFIG_PTHREAD_MUTEX_TYPES=y
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=20
CONFIG_SCHED_ATEXIT=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_WAITPID=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_START_DAY=14
CONFIG_STM32F7_ETHMAC=y
CONFIG_STM32F7_PHYADDR=0
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
CONFIG_STM32F7_PHYSR=31
configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port)
2018-02-19 21:38:22 +01:00
CONFIG_STM32F7_PHYSR_100FD=0x0018
CONFIG_STM32F7_PHYSR_100HD=0x0008
CONFIG_STM32F7_PHYSR_10FD=0x0014
CONFIG_STM32F7_PHYSR_10HD=0x0004
CONFIG_STM32F7_PHYSR_ALTCONFIG=y
CONFIG_STM32F7_PHYSR_ALTMODE=0x001c
CONFIG_STM32F7_USART1=y
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
CONFIG_SYSTEM_NSH=y
CONFIG_SYSTEM_NSH_CXXINITIALIZE=y
configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port)
2018-02-19 21:38:22 +01:00
CONFIG_TASK_NAME_SIZE=0
CONFIG_USART1_SERIAL_CONSOLE=y
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_WDOG_INTRESERVE=0
Reference in New Issue Copy Permalink