sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
44d88abb83
nuttx/net/route/Make.defs

80 lines
2.9 KiB
Plaintext
Raw Normal View History

NET: Move routing table functions to net/route
2014-06-26 21:02:08 +02:00
############################################################################
# net/route/Make.defs
#
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0. Squashed commit of the following: net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations. net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item. net/route: Add initial support for ROM-base, read-only routing tables. net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables. net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
# Copyright (C) 2014, 2017 Gregory Nutt. All rights reserved.
NET: Move routing table functions to net/route
2014-06-26 21:02:08 +02:00
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
ifeq ($(CONFIG_NET_ROUTE),y)
Minor cleanup after laster squashed merge.
2017-09-28 17:23:03 +02:00
# General routing table support
NET: Move routing table functions to net/route
2014-06-26 21:02:08 +02:00
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0. Squashed commit of the following: net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations. net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item. net/route: Add initial support for ROM-base, read-only routing tables. net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables. net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
SOCK_CSRCS += net_initroute.c net_router.c netdev_router.c
# Support in-memory, RAM-based routing tables
ifeq ($(CONFIG_ROUTE_IPv4_RAMROUTE),y)
SOCK_CSRCS += net_alloc_ramroute.c net_add_ramroute.c net_del_ramroute.c
SOCK_CSRCS += net_queue_ramroute.c net_foreach_ramroute.c
else ifeq ($(CONFIG_ROUTE_IPv6_RAMROUTE),y)
SOCK_CSRCS += net_alloc_ramroute.c net_add_ramroute.c net_del_ramroute.c
SOCK_CSRCS += net_queue_ramroute.c net_foreach_ramroute.c
endif
# Support for in-memory, read-only (ROM) routing tables
ifeq ($(CONFIG_ROUTE_IPv4_ROMROUTE),y)
SOCK_CSRCS += net_foreach_romroute.c
else ifeq ($(CONFIG_ROUTE_IPv6_ROMROUTE),y)
SOCK_CSRCS += net_foreach_romroute.c
endif
NET: Move routing table functions to net/route
2014-06-26 21:02:08 +02:00
This commit adds support for routing tables in files in a file system. This might be useful for customized, per-unit routing tables. There are two issues with it however: 1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem. 2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file. In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions. The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y. Squashed commit of the following: net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it. net/route: Fix some issues with locking routing table files. net/route: Add partial implementation of delroute for the case where the routing table is in a file. net/route: Add support for seeking to positions in the routing table. net/route: Add net_addroute_ipv4/6() using a file-based routing table. net/route: Add net_foreach_ipv4/4() using a file-based routing table. net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
2017-09-29 16:33:36 +02:00
# Support for routing tables in files
ifeq ($(CONFIG_ROUTE_IPv4_FILEROUTE),y)
SOCK_CSRCS += net_fileroute.c net_add_fileroute.c net_del_fileroute.c
SOCK_CSRCS += net_foreach_fileroute.c
else ifeq ($(CONFIG_ROUTE_IPv6_FILEROUTE),y)
SOCK_CSRCS += net_fileroute.c net_add_fileroute.c net_del_fileroute.c
SOCK_CSRCS += net_foreach_fileroute.c
endif
Network routing table: Trivial name changes to make IPv4 and IPv6 more symmetric. Add debug logic to dump the content of the router table.
2017-08-11 00:18:06 +02:00
ifeq ($(CONFIG_DEBUG_NET_INFO),y)
SOCK_CSRCS += net_dumproute.c
endif
NET: Move routing table functions to net/route
2014-06-26 21:02:08 +02:00
# Include routing table build support
DEPPATH += --dep-path route
VPATH += :route
endif
Reference in New Issue Copy Permalink