2022-07-22 03:04:05 +02:00
|
|
|
README
|
|
|
|
|
======
|
|
|
|
|
|
|
|
|
|
This directory contains the port of NuttX to the Adafruit QT Py RP2040.
|
|
|
|
|
See https://learn.adafruit.com/adafruit-qt-py-2040 for information
|
|
|
|
|
about Adafruit QT Py RP2040.
|
|
|
|
|
|
|
|
|
|
Currently only the following devices are supported.
|
|
|
|
|
|
|
|
|
|
Supported:
|
|
|
|
|
- UART (console port)
|
|
|
|
|
- GPIO 5 (UART1 RX) and GPIO 20 (UART1 TX) are used for the console.
|
|
|
|
|
- I2C
|
|
|
|
|
- SPI
|
|
|
|
|
- DMAC
|
|
|
|
|
- PWM
|
|
|
|
|
- ADC
|
|
|
|
|
- USB device
|
|
|
|
|
- MSC, CDC/ACM serial and these composite device are supported.
|
|
|
|
|
- CDC/ACM serial device can be used for the console.
|
|
|
|
|
- PIO (RP2040 Programmable I/O)
|
|
|
|
|
- Flash ROM Boot
|
|
|
|
|
- SRAM Boot
|
|
|
|
|
- If Pico SDK is available, nuttx.uf2 file which can be used in
|
|
|
|
|
BOOTSEL mode will be created.
|
|
|
|
|
|
|
|
|
|
Not supported:
|
|
|
|
|
- All other devices
|
|
|
|
|
|
|
|
|
|
Installation
|
|
|
|
|
============
|
|
|
|
|
|
|
|
|
|
1. Download Raspberry Pi Pico SDK
|
|
|
|
|
|
|
|
|
|
$ git clone -b 1.1.2 https://github.com/raspberrypi/pico-sdk.git
|
|
|
|
|
|
|
|
|
|
2. Set PICO_SDK_PATH environment variable
|
|
|
|
|
|
|
|
|
|
$ export PICO_SDK_PATH=<absolute_path_to_pico-sdk_directory>
|
|
|
|
|
|
|
|
|
|
3. Configure and build NuttX
|
|
|
|
|
|
|
|
|
|
$ git clone https://github.com/apache/incubator-nuttx.git nuttx
|
|
|
|
|
$ git clone https://github.com/apache/incubator-nuttx-apps.git apps
|
|
|
|
|
$ cd nuttx
|
|
|
|
|
$ make distclean
|
|
|
|
|
$ ./tools/configure.sh raspberrypi-pico:nsh
|
|
|
|
|
$ make V=1
|
|
|
|
|
|
|
|
|
|
4. Connect Adafruit KB2040 board to USB port while pressing BOOTSEL.
|
|
|
|
|
The board will be detected as USB Mass Storage Device.
|
|
|
|
|
Then copy "nuttx.uf2" into the device.
|
|
|
|
|
(Same manner as the standard Pico SDK applications installation.)
|
|
|
|
|
|
|
|
|
|
5. To access the console, GPIO 20 (TX) and 5 (RX) pins must be connected to a
|
|
|
|
|
device such as USB-serial converter.
|
|
|
|
|
|
|
|
|
|
`usbnsh` configuration provides the console access by USB CDC/ACM serial
|
|
|
|
|
devcice. The console is available by using a terminal software on the USB
|
|
|
|
|
host.
|
|
|
|
|
|
|
|
|
|
Defconfigs
|
|
|
|
|
==========
|
|
|
|
|
|
|
|
|
|
- nsh
|
|
|
|
|
Minimum configuration with NuttShell
|
|
|
|
|
|
2022-09-05 20:34:58 +02:00
|
|
|
- nsh-flash
|
2022-09-05 01:02:24 +02:00
|
|
|
NuttX shell with SMART flash filesystem.
|
|
|
|
|
|
2022-07-22 03:04:05 +02:00
|
|
|
- nshsram
|
|
|
|
|
Load NuttX binary to SRAM
|
|
|
|
|
|
|
|
|
|
- smp
|
|
|
|
|
Enable SMP mode. Both Core 0 and Core 1 are used by NuttX.
|
|
|
|
|
|
|
|
|
|
- usbnsh
|
|
|
|
|
USB CDC/ACM serial console with NuttShell
|
|
|
|
|
|
|
|
|
|
- composite
|
|
|
|
|
USB composite device (MSC + CDC/ACM) support
|
|
|
|
|
`conn` command enables the composite device.
|
|
|
|
|
|
|
|
|
|
License exceptions
|
|
|
|
|
==================
|
|
|
|
|
|
|
|
|
|
The following files are originated from the files in Pico SDK.
|
|
|
|
|
So, the files are licensed under 3-Clause BSD same as Pico SDK.
|
|
|
|
|
|
|
|
|
|
- arch/arm/src/rp2040/rp2040_clock.c
|
|
|
|
|
- arch/arm/src/rp2040/rp2040_pll.c
|
|
|
|
|
- arch/arm/src/rp2040/rp2040_xosc.c
|
|
|
|
|
- These are created by referring the Pico SDK clock initialization.
|
|
|
|
|
|
|
|
|
|
- arch/arm/src/rp2040/rp2040_pio.c
|
|
|
|
|
- arch/arm/src/rp2040/rp2040_pio.h
|
|
|
|
|
- arch/arm/src/rp2040/rp2040_pio_instructions.h
|
|
|
|
|
- These provide the similar APIs to Pico SDK's hardware_pio APIs.
|
|
|
|
|
|
|
|
|
|
- arch/arm/src/rp2040/hardware/*.h
|
|
|
|
|
- These are generated from rp2040.svd originally provided in Pico SDK.
|
