nuttx/configs/olimex-stm32-h407/include/board.h

285 lines
11 KiB
C
Raw Normal View History

2016-01-16 01:49:27 +01:00
/************************************************************************************
* configs/olimex-stm32-h407/include/board.h
*
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Modified for H407 Neil Hancock
2016-01-16 01:49:27 +01:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_OLIMEX_STM32_H407_INCLUDE_BOARD_H
#define __CONFIGS_OLIMEX_STM32_H407_INCLUDE_BOARD_H 1
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
2016-01-18 00:53:57 +01:00
# include <stdint.h>
# include <stdbool.h>
2016-01-16 01:49:27 +01:00
#endif
2016-01-18 00:53:57 +01:00
#ifdef __KERNEL__
# include "stm32_rcc.h"
# include "stm32_sdio.h"
# include "stm32.h"
#endif
2016-01-16 01:49:27 +01:00
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
2016-01-18 00:53:57 +01:00
/* The Olimex-STM32-H407 board features a 12MHz crystal and
* a 32kHz RTC backup crystal.
*
* This is the canonical configuration:
* System Clock source : PLL (HSE)
* SYSCLK(Hz) : 168000000 Determined by PLL configuration
* HCLK(Hz) : 168000000 (STM32_RCC_CFGR_HPRE)
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
* HSE Frequency(Hz) : 8000000 (STM32_BOARD_XTAL)
* PLLM : 8 (STM32_PLLCFG_PLLM)
* PLLN : 336 (STM32_PLLCFG_PLLN)
* PLLP : 2 (STM32_PLLCFG_PLLP)
* PLLQ : 7 (STM32_PLLCFG_PLLQ)
* Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK
* Flash Latency(WS) : 5
* Prefetch Buffer : OFF
* Instruction cache : ON
* Data cache : ON
* Require 48MHz for USB OTG FS, : Enabled
* SDIO and RNG clock
*/
2016-01-16 01:49:27 +01:00
/* HSI - 16 MHz RC factory-trimmed
* LSI - 32 KHz RC (30-60KHz, uncalibrated)
* HSE - On-board crystal frequency is 12MHz
* LSE - 32.768 kHz
* STM32F407ZGT6 - too 168Mhz
*/
#define STM32_BOARD_XTAL 12000000ul
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 32768
/* Main PLL Configuration.
*
* PLL source is HSE
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
* = (25,000,000 / 12) * 360
* = 240,000,000
* SYSCLK = PLL_VCO / PLLP
* = 240,000,000 / 2 = 120,000,000
* USB OTG FS, SDIO and RNG Clock
* = PLL_VCO / PLLQ
* = 240,000,000 / 5 = 48,000,000
* = 48,000,000
*
* Xtal /M *n /P SysClk AHB HCLK APB1 PCLK1
* 12Mhz HSE /12 336 /2 PLLCLK 168Mhz /1 168 /4 42Mhz
* 12Mhz HSE /6 168 /2 PLLCLK 168Mhz /1 168 /4 42Mhz
*/
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(3)
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(84)
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(5)
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7)
#define STM32_SYSCLK_FREQUENCY 168000000ul
2016-01-18 00:53:57 +01:00
/* AHB clock (HCLK) is SYSCLK (168MHz) */
2016-01-16 01:49:27 +01:00
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
2016-01-18 00:53:57 +01:00
/* Timers driven from APB1 will be twice PCLK1 */
2016-01-16 01:49:27 +01:00
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
2016-01-18 00:53:57 +01:00
/* APB2 clock (PCLK2) is HCLK/2 */
2016-01-16 01:49:27 +01:00
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
2016-01-18 00:53:57 +01:00
/* Timers driven from APB2 will be twice PCLK2 */
2016-01-16 01:49:27 +01:00
#define STM32_APB2_TIM1_CLKIN (2 * STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (2 * STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM9_CLKIN (2 * STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM10_CLKIN (2 * STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM11_CLKIN (2 * STM32_PCLK2_FREQUENCY)
2016-01-16 01:49:27 +01:00
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
* otherwise frequency is 2xAPBx.
* Note: TIM1,8 are on APB2, others on APB1
*/
#define BOARD_TIM1_FREQUENCY STM32_HCLK_FREQUENCY
#define BOARD_TIM2_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
#define BOARD_TIM3_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
#define BOARD_TIM4_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
#define BOARD_TIM5_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
#define BOARD_TIM6_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
#define BOARD_TIM7_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
#define BOARD_TIM8_FREQUENCY STM32_HCLK_FREQUENCY
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
* in order to avoid RX overrun/TX underrun errors due to delayed responses
* to service FIFOs in interrupt driven mode. These values have not been
* tuned!!!
*
* SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(118+2)=400 KHz
*/
#define SDIO_INIT_CLKDIV (118 << SDIO_CLKCR_CLKDIV_SHIFT)
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
*/
#ifdef CONFIG_SDIO_DMA
# define SDIO_MMCXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
#else
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
#endif
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
*/
#ifdef CONFIG_SDIO_DMA
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
#else
# define SDIO_SDXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
#endif
2016-01-16 01:49:27 +01:00
/* LED definitions ******************************************************************/
/* If CONFIG_ARCH_LEDS is not defined, then the user can control the status LED in any
* way. The following definitions are used to access individual LEDs.
*/
/* LED index values for use with board_userled() */
#define BOARD_LED_STATUS 0
#define BOARD_NLEDS 1
/* LED bits for use with board_userled_all() */
#define BOARD_LED_STATUS_BIT (1 << BOARD_LED_STATUS)
2016-01-16 01:49:27 +01:00
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the status LED of the
* Olimex STM32-H405. The following definitions describe how NuttX controls the LEDs:
*/
#define LED_STARTED 0 /* LED_STATUS on */
#define LED_HEAPALLOCATE 1 /* no change */
#define LED_IRQSENABLED 2 /* no change */
#define LED_STACKCREATED 3 /* no change */
#define LED_INIRQ 4 /* no change */
#define LED_SIGNAL 5 /* no change */
#define LED_ASSERTION 6 /* LED_STATUS off */
#define LED_PANIC 7 /* LED_STATUS blinking */
/* Button definitions ***************************************************************/
/* The Olimex STM32-H405 supports one buttons: */
#define BUTTON_BUT 0
#define NUM_BUTTONS 1
#define BUTTON_BUT_BIT (1 << BUTTON_BUT)
/* Alternate function pin selections ************************************************/
/* USART3: */
#if 0
#define GPIO_USART3_RX GPIO_USART3_RX_1 /* PB11 */
#define GPIO_USART3_TX GPIO_USART3_TX_1 /* PB10 */
#define GPIO_USART3_CTS GPIO_USART3_CTS_1 /* PB13 */
#define GPIO_USART3_RTS GPIO_USART3_RTS_1 /* PB14 */
#endif
/* USART2: */
#define GPIO_USART2_RX GPIO_USART2_RX_1
#define GPIO_USART2_TX GPIO_USART2_TX_1
#define GPIO_USART2_CTS GPIO_USART2_CTS_1
#define GPIO_USART2_RTS GPIO_USART2_RTS_1
/* USART6: (UEXT connector) */
#define GPIO_USART6_RX GPIO_USART6_RX_1
#define GPIO_USART6_TX GPIO_USART6_TX_1
/* GPIO_USART6_CTS and GPIO_USART6_RTS aren't used for UEXT */
/* CAN: */
#define GPIO_CAN1_RX GPIO_CAN1_RX_2 /* PB8 */
#define GPIO_CAN1_TX GPIO_CAN1_TX_2 /* PB9 */
#define GPIO_CAN2_RX GPIO_CAN1_RX_2 /* PB5 */
#define GPIO_CAN2_TX GPIO_CAN1_TX_2 /* PB6 */
/* DMA Channl/Stream Selections *****************************************************/
/* Stream selections are arbitrary for now but might become important in the future
* if we set aside more DMA channels/streams.
*
* SDIO DMA
* DMAMAP_SDIO_1 = Channel 4, Stream 3
* DMAMAP_SDIO_2 = Channel 4, Stream 6
*/
#define DMAMAP_SDIO DMAMAP_SDIO_1
2016-01-16 01:49:27 +01:00
#endif /* __CONFIGS_OLIMEX_STM32_H407_INCLUDE_BOARD_H */