2013-10-02 02:55:20 +02:00
|
|
|
/****************************************************************************
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
* net/route/net_foreach_romroute.c
|
2013-10-02 02:55:20 +02:00
|
|
|
*
|
2021-02-19 12:45:37 +01:00
|
|
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
|
|
* contributor license agreements. See the NOTICE file distributed with
|
|
|
|
* this work for additional information regarding copyright ownership. The
|
|
|
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
|
|
* "License"); you may not use this file except in compliance with the
|
|
|
|
* License. You may obtain a copy of the License at
|
2013-10-02 02:55:20 +02:00
|
|
|
*
|
2021-02-19 12:45:37 +01:00
|
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
2013-10-02 02:55:20 +02:00
|
|
|
*
|
2021-02-19 12:45:37 +01:00
|
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
|
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
|
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
|
|
* License for the specific language governing permissions and limitations
|
|
|
|
* under the License.
|
2013-10-02 02:55:20 +02:00
|
|
|
*
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
/****************************************************************************
|
|
|
|
* Included Files
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
|
|
|
|
#include <stdint.h>
|
2014-07-05 00:38:51 +02:00
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
#include "route/romroute.h"
|
2014-06-26 21:02:08 +02:00
|
|
|
#include "route/route.h"
|
2013-10-02 02:55:20 +02:00
|
|
|
|
2017-09-28 17:23:03 +02:00
|
|
|
#if defined(CONFIG_ROUTE_IPv4_ROMROUTE) || defined(CONFIG_ROUTE_IPv6_ROMROUTE)
|
2013-10-02 02:55:20 +02:00
|
|
|
|
|
|
|
/****************************************************************************
|
|
|
|
* Public Functions
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
/****************************************************************************
|
2017-08-10 17:14:31 +02:00
|
|
|
* Name: net_foreachroute_ipv4 and net_foreachroute_ipv6
|
2013-10-02 02:55:20 +02:00
|
|
|
*
|
|
|
|
* Description:
|
2017-07-08 21:03:58 +02:00
|
|
|
* Traverse the routing table
|
2013-10-02 02:55:20 +02:00
|
|
|
*
|
2018-03-13 16:52:27 +01:00
|
|
|
* Input Parameters:
|
2017-07-08 21:03:58 +02:00
|
|
|
* handler - Will be called for each route in the routing table.
|
Fix typos (and nxstyle errors)
ReleaseNotes,
arch/arm/src/cxd56xx/cxd56_dmac_common.h,
arch/arm/src/efm32/efm32_dma.h,
arch/arm/src/lpc54xx/lpc54_lcd.c,
arch/arm/src/rp2040/rp2040_dmac.h,
arch/arm/src/stm32/stm32_dma.h,
arch/arm/src/stm32f0l0g0/stm32_dma.h,
arch/arm/src/stm32f7/stm32_dma.h,
arch/arm/src/stm32h7/stm32_dma.h,
arch/arm/src/stm32l4/stm32l4_dma.h,
arch/renesas/src/rx65n/rx65n_dtc.h,
fs/spiffs/src/spiffs_vfs.c,
net/route/cacheroute.h,
net/route/net_cacheroute.c,
net/route/net_foreach_fileroute.c,
net/route/net_foreach_ramroute.c,
net/route/net_foreach_romroute.c, and
net/route/route.h:
* Fix the following typos:
- remove spurious "are"
- "tot he" -> "to the"
arch/arm/src/stm32f0l0g0/stm32_dma.h and
arch/arm/src/stm32l4/stm32l4_dma.h:
* Fix nxstyle errors.
2021-03-21 18:07:36 +01:00
|
|
|
* arg - An arbitrary value that will be passed to the handler.
|
2013-10-02 02:55:20 +02:00
|
|
|
*
|
|
|
|
* Returned Value:
|
2017-09-29 16:33:36 +02:00
|
|
|
* Zero (OK) returned if the entire table was search. A negated errno
|
|
|
|
* value will be returned in the event of a failure. Handlers may also
|
|
|
|
* terminate the search early with any non-zero, non-negative value.
|
2013-10-02 02:55:20 +02:00
|
|
|
*
|
|
|
|
****************************************************************************/
|
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
#ifdef CONFIG_ROUTE_IPv4_ROMROUTE
|
2017-09-29 20:04:45 +02:00
|
|
|
int net_foreachroute_ipv4(route_handler_ipv4_t handler, FAR void *arg)
|
2013-10-02 02:55:20 +02:00
|
|
|
{
|
|
|
|
int ret = 0;
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
int i;
|
2013-10-02 02:55:20 +02:00
|
|
|
|
2013-10-05 20:05:51 +02:00
|
|
|
/* Visit each entry in the routing table */
|
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
for (i = 0; ret == 0 && i < g_ipv4_nroutes; i++)
|
2013-10-02 02:55:20 +02:00
|
|
|
{
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
/* Call the handler. */
|
2013-10-05 20:05:51 +02:00
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
ret = handler(&g_ipv4_routes[i], arg);
|
2013-10-02 02:55:20 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
2015-05-13 15:22:02 +02:00
|
|
|
#endif
|
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
#ifdef CONFIG_ROUTE_IPv6_ROMROUTE
|
2015-05-13 15:22:02 +02:00
|
|
|
int net_foreachroute_ipv6(route_handler_ipv6_t handler, FAR void *arg)
|
|
|
|
{
|
|
|
|
int ret = 0;
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
int i;
|
2015-05-13 15:22:02 +02:00
|
|
|
|
|
|
|
/* Visit each entry in the routing table */
|
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
for (i = 0; ret == 0 && i < g_ipv6_nroutes; i++)
|
2015-05-13 15:22:02 +02:00
|
|
|
{
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
/* Call the handler. */
|
2015-05-13 15:22:02 +02:00
|
|
|
|
Addes support for read-only routing tables. Prior to this change, routing tables were only support in RAM and had to be initialized with explicit logic to add the necessary routes to the routing table. With this change, routes may be defined in the pre-initialized, read-only routing table provided by the board-specific logic
This would be particularly useful, for example, in the case where there is only a single network adaptor and you want all output packets to go to the single adaptor in all cases. So for that behavior you could add a read-only routing table to the board-specific long that contains a single entry, the default route: 0.0.0.0/0.
Squashed commit of the following:
net/route: RAM and ROM routing tables build correctly in all IPv4 and IPv6 configurations.
net/route: Verify IPv6 ROM route build; Make number of ROM routes a variable, not a configuration item.
net/route: Add initial support for ROM-base, read-only routing tables.
net/route: Adjust and generalize some structures, rename some functions, and add configuration and build support that will eventually support read-only routing tables.
net/route: Some initial though experiments on use of a fixe, read-only routing table
2017-09-28 17:04:31 +02:00
|
|
|
ret = handler(&g_ipv6_routes[i], arg);
|
2015-05-13 15:22:02 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#endif
|
2013-10-02 02:55:20 +02:00
|
|
|
|
2017-09-28 17:23:03 +02:00
|
|
|
#endif /* CONFIG_ROUTE_IPv4_ROMROUTE || CONFIG_ROUTE_IPv6_ROMROUTE */
|