nuttx/boards/arm/stm32/stm32f429i-disco/Kconfig

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

if ARCH_BOARD_STM32F429I_DISCO

config STM32F429I_DISCO_FLASH
	bool "MTD driver for external 8Mbyte SST25 FLASH on SPI4"
	default n
	select MTD
	select MTD_SST25XX
	select MTD_SMART
	select FS_SMARTFS
	select STM32_SPI4
	select MTD_BYTE_WRITE
	---help---
		Configures an MTD device for use with the onboard flash

config STM32F429I_DISCO_FLASH_MINOR
	int "Minor number for the FLASH /dev/smart entry"
	default 0
	depends on STM32F429I_DISCO_FLASH
	---help---
		Sets the minor number for the FLASH MTD /dev entry

config STM32F429I_DISCO_FLASH_PART
	bool "Enable partition support on FLASH"
	default n
	depends on STM32F429I_DISCO_FLASH
	---help---
		Enables creation of partitions on the FLASH

config STM32F429I_DISCO_FLASH_CONFIG_PART
	bool "Create application config data partition on FLASH"
	default y
	depends on STM32F429I_DISCO_FLASH_PART
	depends on PLATFORM_CONFIGDATA
	---help---
		Enables creation of a /dev/config partition on the FLASH

config STM32F429I_DISCO_FLASH_CONFIG_PART_NUMBER
	int "Index number of config partition (in list below)"
	default 0
	depends on STM32F429I_DISCO_FLASH_CONFIG_PART
	---help---
		Specifies the index number of the config data partition
		from the partition list.

config STM32F429I_DISCO_FLASH_PART_LIST
	string "Flash partition size list"
	default "4,8188"
	depends on STM32F429I_DISCO_FLASH_PART
	---help---
		Comma separated list of partition sizes in KB.

config STM32F429I_DISCO_FLASH_PART_NAMES
	string "Flash partition name list"
	default "config,rfs"
	depends on STM32F429I_DISCO_FLASH_PART
	depends on MTD_PARTITION_NAMES
	---help---
		Comma separated list of partition names.

config STM32F429I_DISCO_RAMMTD
	bool "MTD driver for SMARTFS RAM disk"
	default n
	select MTD
	select RAMMTD
	---help---
		Configures an MTD based RAM device for use with SMARTFS.

config STM32F429I_DISCO_RAMMTD_MINOR
	int "Minor number for RAM /dev/smart entry"
	default 1
	depends on STM32F429I_DISCO_RAMMTD
	---help---
		Sets the minor number for the RAM MTD /dev entry

config STM32F429I_DISCO_RAMMTD_SIZE
	int "Size in KB of the RAM device to create"
	default 32
	depends on STM32F429I_DISCO_RAMMTD
	---help---
		Sets the size of static RAM allocation for the SMART RAM device

config STM32F429IDISCO_USBHOST_STACKSIZE
	int "USB host waiter stack size"
	default 1024
	depends on USBHOST

config STM32F429IDISCO_USBHOST_PRIO
	int "USB host waiter task priority"
	default 100
	depends on USBHOST

config PM_BUTTONS
	bool "PM Button support"
	default n
	depends on PM && ARCH_IRQBUTTONS
	---help---
		Enable PM button EXTI interrupts to support PM testing

config PM_BUTTON_ACTIVITY
	int "Button PM activity weight"
	default 10
	depends on PM_BUTTONS
	---help---
		The activity weight to report to the power management subsystem when a button is pressed.

config PM_ALARM_SEC
	int "PM_STANDBY delay (seconds)"
	default 15
	depends on PM && RTC_ALARM
	---help---
		Number of seconds to wait in PM_STANDBY before going to PM_STANDBY mode.

config PM_ALARM_NSEC
	int "PM_STANDBY delay (nanoseconds)"
	default 0
	depends on PM && RTC_ALARM
	---help---
		Number of additional nanoseconds to wait in PM_STANDBY before going to PM_STANDBY mode.

config PM_SLEEP_WAKEUP
	bool "PM_SLEEP wake-up alarm"
	default n
	depends on PM && RTC_ALARM
	---help---
		Wake-up of PM_SLEEP mode after a delay and resume normal operation.

config PM_SLEEP_WAKEUP_SEC
	int "PM_SLEEP delay (seconds)"
	default 10
	depends on PM && RTC_ALARM
	---help---
		Number of seconds to wait in PM_SLEEP before going to PM_STANDBY mode.

config PM_SLEEP_WAKEUP_NSEC
	int "PM_SLEEP delay (nanoseconds)"
	default 0
	depends on PM && RTC_ALARM
	---help---
		Number of additional nanoseconds to wait in PM_SLEEP before going to PM_STANDBY mode.

menuconfig STM32F429I_DISCO_ILI9341
	bool "LCD driver for ILI9341 Liquid Crystal Display Controller"
	default n
	---help---
		Enables  support for a connected display based on ili9341 LCD Single Chip
		Driver. This sub driver supports only communication with the display driver
		connected via 4-wire serial (spi) mcu interface.

if STM32F429I_DISCO_ILI9341

choice
	prompt "LCD Interface Type"
	default STM32F429I_DISCO_ILI9341_NONE if !LCD_ILI9341 && !STM32_LTDC
	default STM32F429I_DISCO_ILI9341_LCDIFACE if LCD_ILI9341 && !STM32_LTDC
	default STM32F429I_DISCO_ILI9341_FBIFACE if STM32_LTDC

config STM32F429I_DISCO_ILI9341_NONE
	bool "No LCD interface"

config STM32F429I_DISCO_ILI9341_LCDIFACE
	bool "Enable support for nuttx LCD interface"
	depends on LCD_ILI9341
	---help---
		Enable lcd driver support for the nuttx lcd interface.

config STM32F429I_DISCO_ILI9341_FBIFACE
	bool "Enable support for nuttx framebuffer interface"
	depends on STM32_LTDC
	---help---
		Enable lcd driver support for the nuttx framebuffer interface to displaying
		data via ltdc controller of the stm32f429i mcu.

endchoice # LCD Interface Type

if STM32F429I_DISCO_ILI9341_LCDIFACE

config STM32F429I_DISCO_ILI9341_LCDDEVICE
	int "LCD interface"
	default 0
	range 0 1
	depends on STM32F429I_DISCO_ILI9341_LCDIFACE
	---help---
		Define the lcd interface which should be used. This must be
		corresponding to the configured ili9341 LCD device in the driver
		section.

config STM32F429I_DISCO_ILI9341_SPIFREQUENCY
	int "SPI frequency"
	default 12000000
	---help---
		Define the bus frequency of the SPI device.

config STM32F429I_DISCO_ILI9341_SPIBITS16
	bool "Enable 16 bit pixel read/write"
	default n
	---help---
		This enables faster 16-bit SPI mode for transmitting or receiving pixel data
		to or from the display gram. But uses default 8-bit SPI mode for all other
		display operations.

endif # STM32F429I_DISCO_ILI9341_LCDIFACE

if STM32F429I_DISCO_ILI9341_FBIFACE

choice
	prompt "LCD Orientation"
	default STM32F429I_DISCO_ILI9341_FBIFACE_PORTRAIT
	---help---
		Configure display orientation.

config STM32F429I_DISCO_ILI9341_FBIFACE_LANDSCAPE
	bool "Landscape orientation"
	---help---
		Define for "landscape" orientation support.

config STM32F429I_DISCO_ILI9341_FBIFACE_PORTRAIT
	bool "Portrait orientation"
	---help---
		Define for "portrait" orientation support.

config STM32F429I_DISCO_ILI9341_FBIFACE_RLANDSCAPE
	bool "Reverse landscape orientation"
	---help---
		Define for "reverse landscape" orientation support.

config STM32F429I_DISCO_ILI9341_FBIFACE_RORTRAIT
	bool "Reverse portrait display"
	---help---
		Define for "reverse portrait" orientation support.

endchoice

endif # STM32F429I_DISCO_ILI9341_FBIFACE
endif # STM32F429I_DISCO_ILI9341

config STM32F429I_DISCO_HIGHPRI
	bool "High priority interrupt test"
	default n

endif # ARCH_BOARD_STM32F429I_DISCO