nuttx/wireless/ieee802154/ieee802154_primitive.c

413 lines
12 KiB
C
Raw Normal View History

/****************************************************************************
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
* wireless/ieee802154/ieee802154_primitive.c
*
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <string.h>
#include <nuttx/kmalloc.h>
#include <nuttx/wireless/ieee802154/ieee802154_mac.h>
#include "mac802154.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
/* NOTE: The CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE options is marked as marked
* 'experimental' and with the default 0 zero because there are no interrupt
* level allocations performed by the current IEEE 802.15.4 MAC code.
*/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
#if !defined(CONFIG_IEEE802154_PRIMITIVE_PREALLOC) || \
CONFIG_IEEE802154_PRIMITIVE_PREALLOC < 0
# undef CONFIG_IEEE802154_PRIMITIVE_PREALLOC
# define CONFIG_IEEE802154_PRIMITIVE_PREALLOC 20
#endif
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
#if !defined(CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE) || \
CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE < 0
# undef CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE
# define CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE 0
#endif
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
#if CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE > CONFIG_IEEE802154_PRIMITIVE_PREALLOC
# undef CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE
# define CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE CONFIG_IEEE802154_PRIMITIVE_PREALLOC
#endif
/* Memory Pools */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
#define POOL_PRIMITIVE_GENERAL 0
#define POOL_PRIMITIVE_IRQ 1
#define POOL_PRIMITIVE_DYNAMIC 2
/****************************************************************************
* Private Data Types
****************************************************************************/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
/* Private data type that extends the ieee802154_primitive_s struct */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
struct ieee802154_priv_primitive_s
{
/* Must be first member so we can cast to/from */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
struct ieee802154_primitive_s pub;
FAR struct ieee802154_priv_primitive_s *flink;
uint8_t pool;
};
/****************************************************************************
* Private Data
****************************************************************************/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
#if CONFIG_IEEE802154_PRIMITIVE_PREALLOC > 0
#if CONFIG_IEEE802154_PRIMITIVE_PREALLOC > CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE
/* The g_primfree is a list of primitive structures that are available for
* general use. The number of messages in this list is a system configuration
* item.
*/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
static struct ieee802154_priv_primitive_s *g_primfree;
#endif
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
#if CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE > 0
/* The g_primfree_irq is a list of primitive structures that are reserved for
* use by only by interrupt handlers.
*/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
static struct ieee802154_priv_primitive_s *g_primfree_irq;
#endif
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
/* Pool of pre-allocated primitive stuctures */
static struct ieee802154_priv_primitive_s g_primpool[CONFIG_IEEE802154_PRIMITIVE_PREALLOC];
#endif /* CONFIG_IEEE802154_PRIMITIVE_PREALLOC > 0 */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
static bool g_poolinit = false;
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
* Name: ieee802154_primitivepool_initialize
*
* Description:
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
* This function initializes the primitive allocator. This function must
* be called early in the initialization sequence before any radios
* begin operation.
*
* Input Parameters:
* None
*
* Returned Value:
* None
*
****************************************************************************/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
void ieee802154_primitivepool_initialize(void)
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
/* Only allow the pool to be initialized once */
if (g_poolinit)
{
return;
}
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
g_poolinit = true;
#if CONFIG_IEEE802154_PRIMITIVE_PREALLOC > 0
FAR struct ieee802154_priv_primitive_s *pool = g_primpool;
int remaining = CONFIG_IEEE802154_PRIMITIVE_PREALLOC;
#if CONFIG_IEEE802154_PRIMITIVE_PREALLOC > CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE
/* Initialize g_primfree, thelist of primitive structures that are available
* for general use.
*/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
g_primfree = NULL;
while (remaining > CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE)
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
FAR struct ieee802154_priv_primitive_s *prim = pool;
/* Add the next meta data structure from the pool to the list of
* general structures.
*/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
prim->flink = g_primfree;
g_primfree = prim;
/* Set up for the next structure from the pool */
pool++;
remaining--;
}
#endif
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
#if CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE > 0
/* Initialize g_primfree_irq is a list of primitive structures reserved for
* use by only by interrupt handlers.
*/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
g_primfree_irq = NULL;
while (remaining > 0)
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
FAR struct ieee802154_priv_primitive_s *prim = pool;
/* Add the next meta data structure from the pool to the list of
* general structures.
*/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
prim->flink = g_primfree_irq;
g_primfree_irq = prim;
/* Set up for the next structure from the pool */
pool++;
remaining--;
}
#endif
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
#endif /* CONFIG_IEEE802154_PRIMITIVE_PREALLOC > 0 */
}
/****************************************************************************
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
* Name: ieee802154_primitive_allocate
*
* Description:
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
* The ieee802154_primitive_allocate function will get a free primitive
* structure for use by the IEEE 802.15.4 MAC.
*
* Interrupt handling logic will first attempt to allocate from the
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
* g_primfree list. If that list is empty, it will attempt to allocate
* from its reserve, g_primfree_irq. If that list is empty, then the
* allocation fails (NULL is returned).
*
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
* Non-interrupt handler logic will attempt to allocate from g_primfree
* list. If that the list is empty, then the primitive structure will be
* allocated from the dynamic memory pool.
*
* Input Parameters:
* None
*
* Returned Value:
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
* A reference to the allocated primitive structure. All user fields in this
* structure have been zeroed. On a failure to allocate, NULL is
* returned.
*
****************************************************************************/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
FAR struct ieee802154_primitive_s *ieee802154_primitive_allocate(void)
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
#if CONFIG_IEEE802154_PRIMITIVE_PREALLOC > 0
FAR struct ieee802154_priv_primitive_s *prim;
irqstate_t flags;
uint8_t pool;
/* If we were called from an interrupt handler, then try to get the meta-
* data structure from generally available list of messages. If this fails,
* then try the list of messages reserved for interrupt handlers
*/
flags = enter_critical_section(); /* Always necessary in SMP mode */
if (up_interrupt_context())
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
#if CONFIG_IEEE802154_PRIMITIVE_PREALLOC > CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE
/* Try the general free list */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
if (g_primfree != NULL)
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
prim = g_primfree;
g_primfree = prim->flink;
leave_critical_section(flags);
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
pool = POOL_PRIMITIVE_GENERAL;
}
else
#endif
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
#if CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE > 0
/* Try the list list reserved for interrupt handlers */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
if (g_primfree_irq != NULL)
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
prim = g_primfree_irq;
g_primfree_irq = prim->flink;
leave_critical_section(flags);
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
pool = POOL_PRIMITIVE_IRQ;
}
else
#endif
{
leave_critical_section(flags);
return NULL;
}
}
/* We were not called from an interrupt handler. */
else
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
#if CONFIG_IEEE802154_PRIMITIVE_PREALLOC > CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE
/* Try the general free list */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
if (g_primfree != NULL)
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
prim = g_primfree;
g_primfree = prim->flink;
leave_critical_section(flags);
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
pool = POOL_PRIMITIVE_GENERAL;
}
else
#endif
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
/* If we cannot a primitive structure from the free list, then we
* will have to allocate one from the kernal memory pool.
*/
leave_critical_section(flags);
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
prim = (FAR struct ieee802154_priv_primitive_s *)
kmm_malloc((sizeof (struct ieee802154_priv_primitive_s)));
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
/* Check if we allocated the primitive structure */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
if (prim != NULL)
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
/* Yes... remember that this primitive structure was dynamically allocated */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
pool = POOL_PRIMITIVE_DYNAMIC;
}
}
}
/* We have successfully allocated memory from some source.
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
* Zero and tag the alloated primitive structure.
*/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
prim->pool = pool;
memset(&prim->pub, 0, sizeof(struct ieee802154_primitive_s));
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
wlinfo("Primitive allocated: %p\n", prim);
return &prim->pub;
#else
return NULL;
#endif
}
/****************************************************************************
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
* Name: ieee802154_primitive_free
*
* Description:
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
* The ieee802154_primitive_free function will return a primitive structure to
* the free pool of messages if it was a pre-allocated primitive
* structure. If the primitive structure was allocated dynamically it will
* be deallocated.
*
* Input Parameters:
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
* prim - primitive structure to free
*
* Returned Value:
* None
*
****************************************************************************/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
void ieee802154_primitive_free(FAR struct ieee802154_primitive_s *prim)
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
if (--prim->nclients > 0)
{
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
wlinfo("Remaining Clients: %d\n", prim->nclients);
return;
}
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
#if CONFIG_IEEE802154_PRIMITIVE_PREALLOC > 0
irqstate_t flags;
FAR struct ieee802154_priv_primitive_s *priv =
(FAR struct ieee802154_priv_primitive_s *)prim;
#if CONFIG_IEEE802154_PRIMITIVE_PREALLOC > CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE
/* If this is a generally available pre-allocated primitive structure,
* then just put it back in the free list.
*/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
if (priv->pool == POOL_PRIMITIVE_GENERAL)
{
/* Make sure we avoid concurrent access to the free
* list from interrupt handlers.
*/
flags = enter_critical_section();
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
priv->flink = g_primfree;
g_primfree = priv;
leave_critical_section(flags);
}
else
#endif
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
#if CONFIG_IEEE802154_PRIMITIVE_IRQRESERVE > 0
/* If this is a primitive structure pre-allocated for interrupts,
* then put it back in the correct free list.
*/
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
if (priv->pool == POOL_PRIMITIVE_IRQ)
{
/* Make sure we avoid concurrent access to the free
* list from interrupt handlers.
*/
flags = enter_critical_section();
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
priv->flink = g_primfree_irq;
g_primfree_irq = priv;
leave_critical_section(flags);
}
else
#endif
{
/* Otherwise, deallocate it. */
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
DEBUGASSERT(priv->pool == POOL_PRIMITIVE_DYNAMIC);
sched_kfree(priv);
}
#endif
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
wlinfo("Primitive freed: %p\n", prim);
}