sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
5719dab8ec
nuttx/boards/arm/lpc54xx/lpcxpresso-lpc54628/configs/nsh/defconfig

64 lines
1.6 KiB
Plaintext
Raw Normal View History

tools/Makefile.unix, .win, and all defconfig files: Modify tools/Makefiles to add warning on defconfig files
2019-03-03 15:30:14 +01:00
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
# CONFIG_ARCH_FPU is not set
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
CONFIG_ARCH="arm"
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_ARCH_BOARD="lpcxpresso-lpc54628"
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
CONFIG_ARCH_BOARD_LPCXPRESSO_LPC54628=y
arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.
2017-12-16 20:00:06 +01:00
CONFIG_ARCH_BUTTONS=y
Merged in alinjerpelea/nuttx (pull request #967) group boards based on chip * a1x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * am335x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * c5471: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * scx56xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * dm320: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imx6: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kinetis: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kl: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lc823450: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc17xx_40xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc214x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc2378: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc31xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc43xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc54xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * max326xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * moxart: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nrf52: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nuc1xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam34: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd2l2: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd5e5: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samv7: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f0l0g0: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f7: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32h7: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l4: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * str71x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tiva: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tms570: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xmc4: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * p112: typo fix this boars is a z80 board and was moved to the wrong arch Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: at32uc3: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: at90usb: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: atmega: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hc: mcs92s12ne64: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mips: pic32mx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mips: pic32mz: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * misoc: lm32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * or1k: mor1kx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * renesas: m32262f8: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * renesas: sh7032: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * risk-v: gap8: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * risk-v: nr5m100: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sim: sim: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * x86: qemu: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xtensa: esp32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z16: z16f2811: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: ez80: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: z180: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: z80: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: z8: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tools: update tools for boards based on chip This patch updates only the linux tools Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pcduino-a10: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * beaglebone-black: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * c5471evm: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * spresense: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ntosd-dm320: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32-g8xx-stk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32gg-stk3700: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-efm32g880f128-stk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sabre-6quad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt1050-evk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt1060-evk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k28f: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k64f: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k66f: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kwikstik-k40: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-3.x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * twr-k60n512: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * twr-k64f120m: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-kl25z: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-kl26z: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-lc: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lc823450: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lincoln60: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4088-devkit: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4088-quickstart: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpcxpresso-lpc1768: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mbed: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mcb1700: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc1766stk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * open1788: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pnev5180b: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * u-blox-c027: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zkit-arm-1769: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mcu123-lpc214x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zp214xpa: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc2378: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ea3131: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ea3152: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc-h3131: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * bambino-200e: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4330-xplorer: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4337-ws: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4337-evb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4370-link2: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpcxpresso-lpc54628: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * max32660-evsys: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * moxa: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nrf52-generic: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nutiny-nuc120: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arduino-due: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * flipnclick-sam3x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam3u-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4cmp-db: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4e-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4l-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4s-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4s-xplained-pro: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d2-xult: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d3-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d3x-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d4-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd20-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd21-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * saml21-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * metro-m4: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * same70-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * same71-xult: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * axoloti: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * clicker2-stm32: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * cloudctrl: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * fire-stm32v2: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hymini-stm32v: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * maple: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mikroe-stm32f4: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f103rb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f207zg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f302r8: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f303re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f303ze: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f334r8: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f410rb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f446re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f4x1re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-1152re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-e407: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-h405: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-h407: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p107: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p207: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p407: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * omnibusf4: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * photon: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * shenzou: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3210e-eval: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3220g-eval: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3240g-eval: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32_tiny: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32butterfly2: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f103-minimum: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f334-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f3discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f411e-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f429i-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f4discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32ldiscovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32vldiscovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * viewtool-stm32f107: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * b-l072z-lrwan1: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f072rb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f091rc: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f071rg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l073rz: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f051-discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f072-discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-144: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746-ws: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746g-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746g-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-h743zi: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * b-l475e-iot01a: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l432kc: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l432re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l476rg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l496zg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l476-mdk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l476vg-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l4r9ai-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-strp711: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * dk-tm4c129x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * eagle100: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ekk-lm3s9b96: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-cc1310: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-cc1312r1: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s6432-s2e: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s6965-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s8962-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4f120-launchpad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4c123g-launchpad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4c1294-launchpad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-tms57004: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tms570ls31x-usb-kit: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xmc4500-relax: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zp214xpa: typo fix add missing tools/oocd.sh Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-07 22:49:39 +02:00
CONFIG_ARCH_CHIP="lpc54xx"
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_ARCH_CHIP_LPC54628=y
CONFIG_ARCH_CHIP_LPC54XX=y
arch/arm/src/lpc54xx: Add (incomplete) Ethernet register definition file. Add framework for an Ethernet driver. Initial commit is just the drivers/skeleton.c with naming updated for the LPC54.
2017-12-26 19:55:58 +01:00
CONFIG_ARCH_INTERRUPTSTACK=2048
arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.
2017-12-16 20:00:06 +01:00
CONFIG_ARCH_IRQBUTTONS=y
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARCH_STDARG_H=y
confifgs/lpcxpresso-lpc54628: Calibrate delay loop.
2017-12-19 15:21:41 +01:00
CONFIG_BOARD_LOOPSPERMSEC=21082
arch/arm/src/lpc54628: With these changes, the LPCXpresso-LPC54628 NSH configuration is fully functional. Also adds a README file for the board.
2017-12-10 15:54:24 +01:00
CONFIG_BUILTIN=y
arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.
2017-12-16 20:00:06 +01:00
CONFIG_BUTTONS=y
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
CONFIG_BUTTONS_LOWER=y
arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.
2017-12-16 20:00:06 +01:00
CONFIG_EXAMPLES_BUTTONS=y
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FS_FAT=y
arch/arm/src/lpc54628: With these changes, the LPCXpresso-LPC54628 NSH configuration is fully functional. Also adds a README file for the board.
2017-12-10 15:54:24 +01:00
CONFIG_FS_PROCFS=y
arch/arm/src/lpc54xx: Complete coding of the I2C driver. It is not yet functional and has not yet been seriously tested. config/lpcxpresso-lpc54628: Add support for I2C2 and for the I2C tool to the nsh configuration.
2017-12-15 18:38:55 +01:00
CONFIG_I2C=y
CONFIG_I2CTOOL_MAXBUS=9
arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.
2017-12-16 20:00:06 +01:00
CONFIG_INPUT=y
arch/arm/src/lpc54xx: Bring in NXP support for external SDRAM.
2017-12-10 23:07:30 +01:00
CONFIG_LPC54_EMC=y
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
CONFIG_LPC54_EMC_DYNAMIC_CS0=y
arch/arm/src/lpc54xx: Implement GPIO interrupt support. configs/lpcxpress-lpc54628: Add support for the USER button. Enable the apps/examples/button test in the NSH configuration.
2017-12-16 20:00:06 +01:00
CONFIG_LPC54_GPIOIRQ=y
arch/arm/src/lpc54xx: Complete coding of the I2C driver. It is not yet functional and has not yet been seriously tested. config/lpcxpresso-lpc54628: Add support for I2C2 and for the I2C tool to the nsh configuration.
2017-12-15 18:38:55 +01:00
CONFIG_LPC54_I2C2_MASTER=y
arch/arm/src/lpc54xx: Add an RTC driver and a RTC character driver lower half. configs/lpcxpresso-lpc54628: Add logic to register the RTC character driver if it is enabled. Enable the RTC and RTC character driver in the NSH configuration.
2017-12-25 20:56:06 +01:00
CONFIG_LPC54_RTC=y
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_LPC54_USART0=y
CONFIG_MAX_TASKS=16
CONFIG_NSH_ARCHINIT=y
arch/arm/src/lpc54628: With these changes, the LPCXpresso-LPC54628 NSH configuration is fully functional. Also adds a README file for the board.
2017-12-10 15:54:24 +01:00
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_DISABLE_IFUPDOWN=y
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
configs/lpcxpresso-lpc54628: Add an NxWM configuration. Not yet functional.
2017-12-18 20:33:37 +01:00
CONFIG_RAM_SIZE=163840
configs/lpcxpresso-lpc54628: Correct SRAM base address in all configurations.
2018-01-13 15:34:58 +01:00
CONFIG_RAM_START=0x20000000
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
arch/arm/src/lpc54xx: Add an RTC driver and a RTC character driver lower half. configs/lpcxpresso-lpc54628: Add logic to register the RTC character driver if it is enabled. Enable the RTC and RTC character driver in the NSH configuration.
2017-12-25 20:56:06 +01:00
CONFIG_RTC_ALARM=y
CONFIG_RTC_DRIVER=y
CONFIG_RTC_IOCTL=y
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_SCHED_WAITPID=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_START_DAY=2
CONFIG_START_MONTH=12
CONFIG_SYMTAB_ORDEREDBYNAME=y
arch/arm/src/lpc54xx: Complete coding of the I2C driver. It is not yet functional and has not yet been seriously tested. config/lpcxpresso-lpc54628: Add support for I2C2 and for the I2C tool to the nsh configuration.
2017-12-15 18:38:55 +01:00
CONFIG_SYSTEM_I2CTOOL=y
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
CONFIG_SYSTEM_NSH=y
arch/arm/src/lpc54xx: Bring in NXP support for external SRAM.
2017-12-10 23:52:15 +01:00
CONFIG_SYSTEM_RAMTEST=y
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
CONFIG_TASK_NAME_SIZE=0
CONFIG_USART0_SERIAL_CONSOLE=y
CONFIG_USER_ENTRYPOINT="nsh_main"
Reference in New Issue Copy Permalink