nuttx/wireless/ieee802154/mac802154_getset.c

238 lines
6.9 KiB
C
Raw Normal View History

/****************************************************************************
* wireless/ieee802154/mac802154_getset.c
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdlib.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <string.h>
#include "mac802154.h"
#include "mac802154_internal.h"
#include <nuttx/wireless/ieee802154/ieee802154_mac.h>
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: mac802154_req_get
*
* Description:
* The MLME-GET.request primitive requests information about a given PIB
* attribute.
*
* NOTE: The standard specifies that the attribute value should be returned
* via the asynchronous MLME-GET.confirm primitive.
* However, in our implementation, we synchronously return the value
* immediately. Therefore, we merge the functionality of the
* MLME-GET.request and MLME-GET.confirm primitives together.
*
****************************************************************************/
int mac802154_req_get(MACHANDLE mac, enum ieee802154_attr_e attr,
FAR union ieee802154_attr_u *attrval)
{
FAR struct ieee802154_privmac_s *priv =
(FAR struct ieee802154_privmac_s *)mac;
int ret = IEEE802154_STATUS_SUCCESS;
switch (attr)
{
case IEEE802154_ATTR_MAC_PANID:
{
IEEE802154_PANIDCOPY(attrval->mac.panid, priv->addr.panid);
}
break;
case IEEE802154_ATTR_MAC_SADDR:
{
IEEE802154_SADDRCOPY(attrval->mac.saddr, priv->addr.saddr);
}
break;
case IEEE802154_ATTR_MAC_EADDR:
{
IEEE802154_EADDRCOPY(attrval->mac.eaddr, priv->addr.eaddr);
}
break;
case IEEE802154_ATTR_MAC_COORD_SADDR:
{
IEEE802154_SADDRCOPY(attrval->mac.coordsaddr,
priv->pandesc.coordaddr.saddr);
}
break;
case IEEE802154_ATTR_MAC_COORD_EADDR:
{
IEEE802154_EADDRCOPY(attrval->mac.coordeaddr,
priv->pandesc.coordaddr.eaddr);
}
break;
case IEEE802154_ATTR_MAC_DEVMODE:
{
attrval->mac.devmode = priv->devmode;
}
break;
case IEEE802154_ATTR_MAC_RESPONSE_WAIT_TIME:
{
attrval->mac.resp_waittime = priv->resp_waittime;
}
break;
case IEEE802154_ATTR_MAC_PROMISCUOUS_MODE:
{
attrval->mac.promisc_mode = priv->promisc;
}
break;
case IEEE802154_ATTR_MAC_MAX_FRAME_RETRIES:
{
attrval->mac.max_retries = priv->maxretries;
}
break;
case IEEE802154_ATTR_MAC_RX_ON_WHEN_IDLE:
{
attrval->mac.rxonidle = priv->rxonidle;
}
break;
default:
{
/* The attribute may be handled solely in the radio driver, so pass
* it along.
*/
ret = priv->radio->getattr(priv->radio, attr, attrval);
}
break;
}
return ret;
}
/****************************************************************************
* Name: mac802154_req_set
*
* Description:
* The MLME-SET.request primitive attempts to write the given value to the
* indicated MAC PIB attribute.
*
* NOTE: The standard specifies that confirmation should be indicated via
* the asynchronous MLME-SET.confirm primitive.
* However, in our implementation we synchronously return the status from
* the request. Therefore, we do merge the functionality of the
* MLME-SET.request and MLME-SET.confirm primitives together.
*
****************************************************************************/
int mac802154_req_set(MACHANDLE mac, enum ieee802154_attr_e attr,
FAR const union ieee802154_attr_u *attrval)
{
FAR struct ieee802154_privmac_s *priv =
(FAR struct ieee802154_privmac_s *)mac;
int ret = IEEE802154_STATUS_SUCCESS;
switch (attr)
{
case IEEE802154_ATTR_MAC_PANID:
{
mac802154_setpanid(priv, attrval->mac.panid);
}
break;
case IEEE802154_ATTR_MAC_SADDR:
{
mac802154_setsaddr(priv, attrval->mac.saddr);
}
break;
case IEEE802154_ATTR_MAC_EADDR:
{
/* macExtendedAddress is a read-only attribute */
ret = IEEE802154_STATUS_DENIED;
}
break;
case IEEE802154_ATTR_MAC_COORD_SADDR:
{
mac802154_setcoordsaddr(priv, attrval->mac.coordsaddr);
}
break;
case IEEE802154_ATTR_MAC_COORD_EADDR:
{
mac802154_setcoordeaddr(priv, attrval->mac.coordeaddr);
}
break;
case IEEE802154_ATTR_MAC_ASSOCIATION_PERMIT:
{
priv->sfspec.assocpermit = attrval->mac.assocpermit;
priv->beaconupdate = true;
}
break;
case IEEE802154_ATTR_MAC_RESPONSE_WAIT_TIME:
{
priv->resp_waittime = attrval->mac.resp_waittime;
}
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
break;
case IEEE802154_ATTR_MAC_RX_ON_WHEN_IDLE:
{
mac802154_setrxonidle(priv, attrval->mac.rxonidle);
}
Merged in antmerlino/nuttx/sixlowpan-mac802154 (pull request #526) ieee802154: Simplifies notify() and rxframe() calls to a single notify() call. dataind's and all other "notifs" are now "primitives" which aligns with standard terminology * mac802154: Adds missing breaks from case statement * sixlowpan: Fixes bad logic where ACK is not requested if address is not a broadcast * ieee802154: Simplification of "notifs" and "datainds" to generic primitives passed via a single notify call to the layer above the MAC * Directories.mk should reference CONFIG_WIRELESS instead of CONFIG_DRIVERS_WIRELESS * xbee_netdev: Network must be locked when calling sixlowpan_input * sixlowpan: Reassembly buffer can't be freed if provided by radio driver * sixlowpan: Don't free IOB if there is an error processing it as the MAC will try to pass it along to another receiver * ieee802154: Adds basic logging to ieee802154_primitive.c * Minor fixes after rebase * xbee: Adds AT query timeout to retry if XBee doesn't respond to request * same70-xplained: Adds Xbee support. Makes mikroBus slot Kconfig 'choice' * mac802154: Removes unused function declaration * drivers/mrf24j40: Fixes compilation error using . operator rather than -> operator * mac802154_device: Changes a few mac802154_primtive_free's to ieee802154_primitive_free() and changes notif to primitive in a couple places. * mac802154: Adds promiscous mode logic to bypass parsing of incoming frames. MAC char device also checks for promiscous mode and passes whole frames including header and FCS to the application if promiscous mode is enabled. * sixlowpan: Fixes logic to correctly check if packet is large enough to include header. This would cause packets to be considered too small when they are sufficiently sized. * sixlowpan: Fixes forwarding logic to use forwarding device rather than received device to look up destination link layer address * net/ipforward: Fixes typo that caused build error when IP forwarding was enabled with CONFIG_NET_ICMPv6_NEIGHBOR enabled as well. * configs/same70-xplained: Simple spelling fix Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-11-01 21:15:21 +01:00
break;
case IEEE802154_ATTR_MAC_PROMISCUOUS_MODE:
{
ret = priv->radio->setattr(priv->radio, attr, attrval);
if (ret == 0)
{
priv->promisc = attrval->mac.promisc_mode;
}
}
break;
case IEEE802154_ATTR_MAC_MAX_FRAME_RETRIES:
{
priv->maxretries = attrval->mac.max_retries;
}
break;
default:
{
/* The attribute may be handled solely in the radio driver, so pass
* it along.
*/
ret = priv->radio->setattr(priv->radio, attr, attrval);
}
break;
}
return ret;
}