nuttx/net/ipforward/ipv4_forward.c

543 lines
16 KiB
C
Raw Normal View History

/****************************************************************************
* net/ipforward/ipv4_forward.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <string.h>
#include <assert.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/mm/iob.h>
#include <nuttx/net/net.h>
#include <nuttx/net/netdev.h>
#include <nuttx/net/netstats.h>
#include "netdev/netdev.h"
#include "utils/utils.h"
#include "sixlowpan/sixlowpan.h"
#include "ipforward/ipforward.h"
#include "devif/devif.h"
#if defined(CONFIG_NET_IPFORWARD) && defined(CONFIG_NET_IPv4)
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: ipv4_hdrsize
*
* Description:
* Return the size of the IPv4 header and the following.
*
* Input Parameters:
* ipv4 - A pointer to the IPv4 header in within the IPv4 packet. This
* is immediately followed by the L3 header which may be TCP, UDP
* or ICMP.
*
* Returned Value:
* The size of the combined L2 + L3 headers is returned on success. An
* error is returned only if the prototype is not supported.
*
****************************************************************************/
#ifdef CONFIG_DEBUG_NET_WARN
static int ipv4_hdrsize(FAR struct ipv4_hdr_s *ipv4)
{
uint16_t iphdrlen;
/* Get the IP header length (accounting for possible options). */
iphdrlen = (ipv4->vhl & IPv4_HLMASK) << 2;
/* Size is also determined by the following protocol header, */
switch (ipv4->proto)
{
#ifdef CONFIG_NET_TCP
case IP_PROTO_TCP:
{
FAR struct tcp_hdr_s *tcp =
(FAR struct tcp_hdr_s *)((FAR uint8_t *)ipv4 + iphdrlen);
unsigned int tcpsize;
/* The TCP header length is encoded in the top 4 bits of the
* tcpoffset field (in units of 32-bit words).
*/
tcpsize = ((uint16_t)tcp->tcpoffset >> 4) << 2;
return iphdrlen + tcpsize;
}
break;
#endif
#ifdef CONFIG_NET_UDP
case IP_PROTO_UDP:
return iphdrlen + UDP_HDRLEN;
break;
#endif
#ifdef CONFIG_NET_ICMP
case IP_PROTO_ICMP:
return iphdrlen + ICMP_HDRLEN;
break;
#endif
default:
nwarn("WARNING: Unrecognized proto: %u\n", ipv4->proto);
return -EPROTONOSUPPORT;
}
}
#endif
/****************************************************************************
* Name: ipv4_decr_ttl
*
* Description:
* Decrement the IPv4 TTL (time to live value). TTL field is set by the
* sender of the packet and reduced by every router on the route to its
* destination. If the TTL field reaches zero before the datagram arrives
* at its destination, then the datagram is discarded and an ICMP error
* packet (11 - Time Exceeded) is sent back to the sender.
*
* The purpose of the TTL field is to avoid a situation in which an
* undeliverable datagram keeps circulating on an Internet system, and
* such a system eventually becoming swamped by such "immortals".
*
* Input Parameters:
* ipv4 - A pointer to the IPv4 header in within the IPv4 packet to be
* forwarded.
*
* Returned Value:
* The new TTL value is returned. A value <= 0 means the hop limit has
* expired.
*
****************************************************************************/
static int ipv4_decr_ttl(FAR struct ipv4_hdr_s *ipv4)
{
uint16_t iphdrlen;
uint16_t sum;
int ttl;
/* Check time-to-live (TTL) */
ttl = (int)ipv4->ttl - 1;
if (ttl <= 0)
{
#ifdef CONFIG_NET_ICMP
/* Return an ICMP error packet back to the sender. */
2019-10-25 19:31:42 +02:00
# warning Missing logic
#endif
/* Return zero which must cause the packet to be dropped */
return 0;
}
/* Save the updated TTL value */
ipv4->ttl = ttl;
/* Get the IP header length (accounting for possible options). */
iphdrlen = (ipv4->vhl & IPv4_HLMASK) << 2;
/* Re-calculate the IPv4 checksum. This checksum is the Internet checksum
* of the 20 bytes of the IPv4 header. This checksum will be different
* because we just modify the IPv4 TTL.
*/
ipv4->ipchksum = 0;
sum = chksum(0, (FAR const uint8_t *)ipv4, iphdrlen);
if (sum == 0)
{
sum = 0xffff;
}
else
{
sum = HTONS(sum);
}
ipv4->ipchksum = ~sum;
return ttl;
}
/****************************************************************************
* Name: ipv4_dev_forward
*
* Description:
* This function is called from ipv4_forward when it is necessary to
* forward a packet from the current device to different device. In this
* case, the forwarding operation must be performed asynchronously when
* the TX poll is received from the forwarding device.
*
* Input Parameters:
* dev - The device on which the packet was received and which
* contains the IPv4 packet.
* fwdddev - The device on which the packet must be forwarded.
* ipv4 - A pointer to the IPv4 header in within the IPv4 packet
*
* Returned Value:
* Zero is returned if the packet was successfully forward; A negated
* errno value is returned if the packet is not forwardable. In that
* latter case, the caller (ipv4_input()) should drop the packet.
*
****************************************************************************/
static int ipv4_dev_forward(FAR struct net_driver_s *dev,
FAR struct net_driver_s *fwddev,
FAR struct ipv4_hdr_s *ipv4)
{
FAR struct forward_s *fwd = NULL;
#ifdef CONFIG_DEBUG_NET_WARN
int hdrsize;
#endif
int ret;
/* Verify that the full packet will fit within the forwarding devices MTU.
* We provide no support for fragmenting forwarded packets.
*/
This commit attempts remove some long standard confusion in naming and some actual problems that result from the naming confusion. The basic problem is the standard MTU does not include the size of the Ethernet header. For clarity, I changed the naming of most things called MTU to PKTSIZE. For example, CONFIG_NET_ETH_MTU is now CONFIG_NET_ETH_PKTSIZE. This makes the user interface a little hostile. People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header). A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length. Instead, we define the packet buffer size then derive the MTU. The MTU is not common currency in networking. On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP). Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes. So we should be all good and without the recurring 14 byte error in MTU's and MSS's. Squashed commit of the following: Trivial update to fix some spacing issues. net/: Rename several macros containing _MTU to _PKTSIZE. net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes). net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes). net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE. This is not the MTU which does not include the size of the link layer header. This is the full size of the packet buffer memory (minus any GUARD bytes). net/: Rename the file d_mtu in the network driver structure to d_pktsize. That value saved there is not the MTU. The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header. The MTU does not include the link layer header.
2018-07-04 22:10:40 +02:00
if (NET_LL_HDRLEN(fwddev) + dev->d_len > NETDEV_PKTSIZE(fwddev))
{
nwarn("WARNING: Packet > MTU... Dropping\n");
ret = -EFBIG;
goto errout;
}
/* Get a pre-allocated forwarding structure, This structure will be
* completely zeroed when we receive it.
*/
fwd = ipfwd_alloc();
if (fwd == NULL)
{
nwarn("WARNING: Failed to allocate forwarding structure\n");
ret = -ENOMEM;
goto errout;
}
/* Initialize the easy stuff in the forwarding structure */
fwd->f_dev = fwddev; /* Forwarding device */
#ifdef CONFIG_NET_IPv5
fwd->f_domain = PF_INET; /* IPv64 address domain */
#endif
#ifdef CONFIG_DEBUG_NET_WARN
/* Get the size of the IPv4 + L3 header. */
hdrsize = ipv4_hdrsize(ipv4);
if (hdrsize < IPv4_HDRLEN)
{
nwarn("WARNING: Could not determine L2+L3 header size\n");
ret = -EPROTONOSUPPORT;
goto errout_with_fwd;
}
/* The L2/L3 headers must fit within one, contiguous IOB. */
if (hdrsize > CONFIG_IOB_BUFSIZE)
{
nwarn("WARNING: Header is too big for pre-allocated structure\n");
ret = -E2BIG;
goto errout_with_fwd;
}
#endif
/* Try to allocate the head of an IOB chain. If this fails, the
* packet will be dropped; we are not operating in a context
* where waiting for an IOB is a good idea
*/
fwd->f_iob = iob_tryalloc(false);
if (fwd->f_iob == NULL)
{
nwarn("WARNING: iob_tryalloc() failed\n");
ret = -ENOMEM;
goto errout_with_fwd;
}
/* Copy the L2/L3 headers plus any following payload into an IOB chain.
* iob_trycopin() will not wait, but will fail there are no available
* IOBs.
*
* REVISIT: Consider an alternative design that does not require data
* copying. This would require a pool of d_buf's that are managed by
* the network rather than the network device.
*/
ret = iob_trycopyin(fwd->f_iob, (FAR const uint8_t *)ipv4,
dev->d_len, 0, false);
if (ret < 0)
{
nwarn("WARNING: iob_trycopyin() failed: %d\n", ret);
goto errout_with_iobchain;
}
/* Decrement the TTL in the copy of the IPv4 header (retaining the
* original TTL in the source to handle the broadcast case). If the
* TLL decrements to zero, then do not forward the packet.
*/
ret = ipv4_decr_ttl((FAR struct ipv4_hdr_s *)fwd->f_iob->io_data);
if (ret < 1)
{
nwarn("WARNING: Hop limit exceeded... Dropping!\n");
ret = -EMULTIHOP;
goto errout_with_iobchain;
}
/* Then set up to forward the packet according to the protocol. */
ret = ipfwd_forward(fwd);
if (ret >= 0)
{
dev->d_len = 0;
return OK;
}
errout_with_iobchain:
if (fwd != NULL && fwd->f_iob != NULL)
{
iob_free_chain(fwd->f_iob);
}
errout_with_fwd:
if (fwd != NULL)
{
ipfwd_free(fwd);
}
errout:
return ret;
}
/****************************************************************************
* Name: ipv4_forward_callback
*
* Description:
* This function is a callback from netdev_foreach. It implements the
* the broadcast forwarding action for each network device (other than, of
* course, the device that received the packet).
*
* Input Parameters:
* dev - The device on which the packet was received and which contains
* the IPv4 packet.
* ipv4 - A convenience pointer to the IPv4 header in within the IPv4
* packet
*
* Returned Value:
* Typically returns zero (meaning to continue the enumeration), but will
* return a non-zero to stop the enumeration if an error occurs.
*
****************************************************************************/
#ifdef CONFIG_NET_IPFORWARD_BROADCAST
int ipv4_forward_callback(FAR struct net_driver_s *fwddev, FAR void *arg)
{
FAR struct net_driver_s *dev = (FAR struct net_driver_s *)arg;
FAR struct ipv4_hdr_s *ipv4;
int ret;
DEBUGASSERT(fwddev != NULL && dev != NULL && dev->d_buf != NULL);
/* Check if we are forwarding on the same device that we received the
* packet from.
*/
if (fwddev != dev)
{
/* Recover the pointer to the IPv4 header in the receiving device's
* d_buf.
*/
ipv4 = (FAR struct ipv4_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev)];
/* Send the packet asynchrously on the forwarding device. */
ret = ipv4_dev_forward(dev, fwddev, ipv4);
if (ret < 0)
{
nwarn("WARNING: ipv4_dev_forward failed: %d\n", ret);
return ret;
}
}
return OK;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: ipv4_forward
*
* Description:
* This function is called from ipv4_input when a packet is received that
* is not destined for us. In this case, the packet may need to be
* forwarded to another device (or sent back out the same device)
* depending configuration, routing table information, and the IPv4
* networks served by various network devices.
*
* Input Parameters:
* dev - The device on which the packet was received and which contains
* the IPv4 packet.
* ipv4 - A convenience pointer to the IPv4 header in within the IPv4
* packet
*
* On input:
* - dev->d_buf holds the received packet.
* - dev->d_len holds the length of the received packet MINUS the
* size of the L1 header. That was subtracted out by ipv4_input.
* - ipv4 points to the IPv4 header with dev->d_buf.
*
* Returned Value:
* Zero is returned if the packet was successfully forward; A negated
* errno value is returned if the packet is not forwardable. In that
* latter case, the caller (ipv4_input()) should drop the packet.
*
****************************************************************************/
int ipv4_forward(FAR struct net_driver_s *dev, FAR struct ipv4_hdr_s *ipv4)
{
in_addr_t destipaddr;
in_addr_t srcipaddr;
FAR struct net_driver_s *fwddev;
int ret;
/* Search for a device that can forward this packet. */
destipaddr = net_ip4addr_conv32(ipv4->destipaddr);
srcipaddr = net_ip4addr_conv32(ipv4->srcipaddr);
fwddev = netdev_findby_ripv4addr(srcipaddr, destipaddr);
if (fwddev == NULL)
{
nwarn("WARNING: Not routable\n");
return (ssize_t)-ENETUNREACH;
}
/* Check if we are forwarding on the same device that we received the
* packet from.
*/
if (fwddev != dev)
{
/* Send the packet asynchrously on the forwarding device. */
ret = ipv4_dev_forward(dev, fwddev, ipv4);
if (ret < 0)
{
nwarn("WARNING: ipv4_dev_forward failed: %d\n", ret);
goto drop;
}
}
else
{
/* Single network device. The use case here is where an endpoint acts
* as a hub in a star configuration. This is typical for a wireless
* star configuration where not all endpoints are accessible from all
* other endpoints, but seems less useful for a wired network.
*/
#ifdef CONFIG_NET_ETHERNET
/* REVISIT: For Ethernet we may have to fix up the Ethernet header:
* - source MAC, the MAC of the current device.
* - dest MAC, the MAC associated with the destination IPv4 address.
* This will involve ICMP.
*/
/* Correct dev->d_buf by adding back the L1 header length */
2019-10-25 19:31:42 +02:00
#endif
nwarn("WARNING: Packet forwarding to same device not supportedN\n");
ret = -ENOSYS;
goto drop;
}
/* Return success. ipv4_input will return to the network driver with
* dev->d_len set to the packet size and the network driver will perform
* the transfer.
*/
return OK;
drop:
ipv4_dropstats(ipv4);
dev->d_len = 0;
return ret;
}
/****************************************************************************
* Name: ipv4_forward_broadcast
*
* Description:
* This function is called from ipv4_input when a broadcast or multicast
* packet is received. If CONFIG_NET_IPFORWARD_BROADCAST is enabled, this
* function will forward the broadcast packet to other networks through
* other network devices.
*
* Input Parameters:
* dev - The device on which the packet was received and which contains
* the IPv4 packet.
* ipv4 - A convenience pointer to the IPv4 header in within the IPv4
* packet
*
* On input:
* - dev->d_buf holds the received packet.
* - dev->d_len holds the length of the received packet MINUS the
* size of the L1 header. That was subtracted out by ipv4_input.
* - ipv4 points to the IPv4 header with dev->d_buf.
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef CONFIG_NET_IPFORWARD_BROADCAST
void ipv4_forward_broadcast(FAR struct net_driver_s *dev,
FAR struct ipv4_hdr_s *ipv4)
{
/* Don't bother if the TTL would expire */
if (ipv4->ttl > 1)
{
/* Forward the the broadcast/multicast packet to all devices except,
* of course, the device that received the packet.
*/
netdev_foreach(ipv4_forward_callback, dev);
}
}
#endif
#endif /* CONFIG_NET_IPFORWARD && CONFIG_NET_IPv4 */