nuttx/boards/arm/imxrt/imxrt1170-evk/scripts/Make.defs

52 lines
2.1 KiB
Plaintext
Raw Normal View History

Base IMXRT1170 port Co-authored-by: Jari van Ewijk <jari.vanewijk@nxp.com> Co-authored-by: David Sidrane <david.sidrane@nscdg.com> Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com> imxrt:Kconfig fix formatting imxrt:usbphy move IMXRT_USBPHY{1|[2]}_BASE to memory map imxrt:lpspi Fix build breakage from adding 1170 imxrt:Finish 1170 iomux and clockconfig versioning imxrt:Remove duplicate imxrt_clock{off|all}_lpi2c4 imxrt:pmu remove duplicate dcd non 117x header imxrt:lpspi Fix unused var warnings imxrt:lpi2c Fix unused var warnings imxrt:lowputs Fix unused var warnings imxrt:imxrt117x_dmamux fix duplicate entries imxtr:serial Use IOMUX_PULL_{UP|DOWN} and map IOMUX V1 to them imxrt:MPU Support the 1170 imxrt:dmamux Alias IMXRT_DMAMUX0_BASE as IMXRT_DMAMUX_BASE imx1170:ccm Alias CCM_CCGR_DMA & CCM_CCGR_SNVS_LP for compatiblity Author: Peter van der Perk <peter.vanderperk@nxp.com> IMXRT7 Add LPUART 9/10/11/12 support Author: David Sidrane <david.sidrane@nscdg.com> imxrt:1170pinmux Add QTIMER pins imxrt:1170pinmux Add GPT pins imxrt:1170pinmux Add FLEXPWM pins imxrt1170:pinmap Add GPIO_ENET_1G pinning imxrt:enet Support ENET_1G imxrt:periphclks rt1170 does not have canX_serial clock imxrt:flexcan:Layer imxrt_ioctl imxrt117x:memorymap added CAN3 imxrt:ADC support ver1 and ver2 for imxrt117x imxrt:imxrt117x_ccm Align timer naming with other imxrt QTIMERn->TIMERn imxrt:imxrt117x_ccm align CCM names with rt106x imxrt:XBAR support larger number of selects needed on imxrt1170 Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com> FlexSPI AHB Region support, PIT rename for compatiblity imxrt:USB Analog add VBUS_VALID_3V FlexSPI expand prefetch registers for IMXRT117X imxrt:Support Initialization of FlexRam without Running from OCRAM imxrt: ocotp add UNIQUE_ID register definition imxrt: enet use ocotp unique_id imxrt: enet fixes for imxrt117x imxrt: ethernet pinmux sion enable imxrt:imxrt_periphclk_configure add memory sync Flush the pipeline to prevent bus faults, by insuring a peripheral is clocked before being accessed on return from this function. imxrt:Restructure gpioN to padmux mapping imxrt:Add imxrt1170 daisy imxrt: correct power modes for imxrt117x fixing hang on WFI imxrt: imxrt117x TCM MPU config imxrt: FlexRAM clocking DIV0 setup imxrt: 117x periphclocks wait for status bit imxrt: iomucx set pad settings correctly and allow reconfiguration imxrt: enet align buffers 64-byte for optimal performance Add DSC barriers for write-through cache support imxrt: imxrt1170 use FlexCAN FD/ECC features imxrt:iomuxc_ver2 (117x) SD_B1 and DISP_B1 use PULL feild not PUE/PUS imxrt:Fix 1170 SNVS addressing imxrt: enet set mii clock after ifdown so that phy keep working nxstyle fixes imxrt: preprocessor and include fixes Fix configs imxrt1170-evk clean defconfig
2023-01-25 15:40:00 +01:00
############################################################################
# boards/arm/imxrt/imxrt1170-evk/scripts/Make.defs
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
############################################################################
include $(TOPDIR)/.config
include $(TOPDIR)/tools/Config.mk
include $(TOPDIR)/arch/arm/src/armv7-m/Toolchain.defs
ifeq ($(CONFIG_BOOT_RUNFROMFLASH),y)
LDSCRIPT = flash.ld
else ifeq ($(CONFIG_BOOT_RUNFROMISRAM),y)
LDSCRIPT = flash-ocram.ld
endif
ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS := $(ARCHCFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS := $(ARCHCXXFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS := $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS)
AFLAGS := $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
# Loadable module definitions
CMODULEFLAGS = $(CFLAGS) -mlong-calls # --target1-abs
LDMODULEFLAGS = -r -e module_initialize
LDMODULEFLAGS += -T $(call CONVERT_PATH,$(TOPDIR)/libs/libc/modlib/gnu-elf.ld)