2019-06-17 23:57:42 +02:00
|
|
|
/****************************************************************************
|
2019-08-13 18:08:49 +02:00
|
|
|
* boards/arm/lpc17xx_40xx/pnev5180b/include/board.h
|
2019-06-17 23:57:42 +02:00
|
|
|
* include/arch/board/board.h
|
|
|
|
|
*
|
|
|
|
|
* Copyright (C) 2019 Gregory Nutt. All rights reserved.
|
|
|
|
|
* Author: Michael Jung <mijung@gmx.net>
|
|
|
|
|
*
|
2019-08-05 14:04:14 +02:00
|
|
|
* Based on boards/zkit-arm-1769/include/board.h
|
2019-06-17 23:57:42 +02:00
|
|
|
* Copyright (C) 2013 Zilogic Systems. All rights reserved.
|
|
|
|
|
* Author: BabuSubashChandar <code@zilogic.com>
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
*
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in
|
|
|
|
|
* the documentation and/or other materials provided with the
|
|
|
|
|
* distribution.
|
|
|
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
|
|
|
* used to endorse or promote products derived from this software
|
|
|
|
|
* without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
|
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
|
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
|
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
|
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
|
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
|
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*
|
|
|
|
|
*****************************************************************************/
|
|
|
|
|
|
2019-08-13 18:08:49 +02:00
|
|
|
#ifndef __BOARDS_ARM_LPC17XX_40XX_PNEV5180B_INCLUDE_BOARD_H
|
|
|
|
|
#define __BOARDS_ARM_LPC17XX_40XX_PNEV5180B_INCLUDE_BOARD_H
|
2019-06-17 23:57:42 +02:00
|
|
|
|
|
|
|
|
/*****************************************************************************
|
|
|
|
|
* Included Files
|
|
|
|
|
****************************************************************************/
|
|
|
|
|
|
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
|
|
|
|
|
|
#include <stdbool.h>
|
|
|
|
|
|
2019-07-11 18:50:00 +02:00
|
|
|
#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_LPC17_40_GPIOIRQ)
|
2019-06-17 23:57:42 +02:00
|
|
|
# include <nuttx/irq.h>
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/*****************************************************************************
|
|
|
|
|
* Pre-processor Definitions
|
|
|
|
|
*****************************************************************************/
|
|
|
|
|
|
|
|
|
|
/* Clocking ******************************************************************/
|
|
|
|
|
|
2019-07-11 18:50:00 +02:00
|
|
|
/* NOTE: The following definitions require lpc17_40_syscon.h. It is not
|
2019-06-17 23:57:42 +02:00
|
|
|
* included here because the including C file may not have that file in its
|
|
|
|
|
* include path.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define BOARD_XTAL_FREQUENCY (12000000) /* XTAL oscillator frequency */
|
|
|
|
|
#define BOARD_OSCCLK_FREQUENCY BOARD_XTAL_FREQUENCY /* Main oscillator frequency */
|
|
|
|
|
#define BOARD_RTCCLK_FREQUENCY (32768) /* RTC oscillator frequency */
|
|
|
|
|
#define BOARD_INTRCOSC_FREQUENCY (4000000) /* Internal RC oscillator frequency */
|
|
|
|
|
|
|
|
|
|
/* This is the clock setup we configure for:
|
|
|
|
|
*
|
|
|
|
|
* SYSCLK = BOARD_OSCCLK_FREQUENCY = 12MHz -> Select Main oscillator for
|
|
|
|
|
* source
|
|
|
|
|
* PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz -> PLL0 multipler=20,
|
|
|
|
|
* pre-divider=1
|
|
|
|
|
* CCLCK = 480MHz / 4 = 120MHz -> CCLK divider = 4
|
|
|
|
|
*/
|
|
|
|
|
|
2019-07-11 18:50:00 +02:00
|
|
|
#define LPC17_40_CCLK 120000000 /* 120Mhz */
|
2019-06-17 23:57:42 +02:00
|
|
|
|
|
|
|
|
/* Select the main oscillator as the frequency source. SYSCLK is then the
|
|
|
|
|
* frequency of the main oscillator.
|
|
|
|
|
*/
|
|
|
|
|
|
2019-07-11 18:50:00 +02:00
|
|
|
#undef CONFIG_LPC17_40_MAINOSC
|
|
|
|
|
#define CONFIG_LPC17_40_MAINOSC 1
|
2019-06-17 23:57:42 +02:00
|
|
|
#define BOARD_SCS_VALUE SYSCON_SCS_OSCEN
|
|
|
|
|
|
|
|
|
|
/* Select the main oscillator and CCLK divider. The output of the divider is
|
|
|
|
|
* CCLK. The input to the divider (PLLCLK) will be determined by the PLL
|
|
|
|
|
* output.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define BOARD_CCLKCFG_DIVIDER 4
|
|
|
|
|
#define BOARD_CCLKCFG_VALUE ((BOARD_CCLKCFG_DIVIDER-1) << SYSCON_CCLKCFG_SHIFT)
|
|
|
|
|
|
|
|
|
|
/* PLL0. PLL0 is used to generate the CPU clock divider input (PLLCLK).
|
|
|
|
|
*
|
|
|
|
|
* Source clock: Main oscillator
|
|
|
|
|
* PLL0 Multiplier value (M): 20
|
|
|
|
|
* PLL0 Pre-divider value (N): 1
|
|
|
|
|
*
|
|
|
|
|
* PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz
|
|
|
|
|
*/
|
|
|
|
|
|
2019-07-11 18:50:00 +02:00
|
|
|
#undef CONFIG_LPC17_40_PLL0
|
|
|
|
|
#define CONFIG_LPC17_40_PLL0 1
|
2019-06-17 23:57:42 +02:00
|
|
|
#define BOARD_CLKSRCSEL_VALUE SYSCON_CLKSRCSEL_MAIN
|
|
|
|
|
|
|
|
|
|
#define BOARD_PLL0CFG_MSEL 20
|
|
|
|
|
#define BOARD_PLL0CFG_NSEL 1
|
|
|
|
|
#define BOARD_PLL0CFG_VALUE \
|
|
|
|
|
(((BOARD_PLL0CFG_MSEL-1) << SYSCON_PLL0CFG_MSEL_SHIFT) | \
|
|
|
|
|
((BOARD_PLL0CFG_NSEL-1) << SYSCON_PLL0CFG_NSEL_SHIFT))
|
|
|
|
|
|
|
|
|
|
/* PLL1 -- Not used. */
|
|
|
|
|
|
2019-07-11 18:50:00 +02:00
|
|
|
#undef CONFIG_LPC17_40_PLL1
|
2019-06-17 23:57:42 +02:00
|
|
|
#define BOARD_PLL1CFG_MSEL 36
|
|
|
|
|
#define BOARD_PLL1CFG_NSEL 1
|
|
|
|
|
#define BOARD_PLL1CFG_VALUE \
|
|
|
|
|
(((BOARD_PLL1CFG_MSEL-1) << SYSCON_PLL1CFG_MSEL_SHIFT) | \
|
|
|
|
|
((BOARD_PLL1CFG_NSEL-1) << SYSCON_PLL1CFG_NSEL_SHIFT))
|
|
|
|
|
|
|
|
|
|
/* USB divider. This divider is used when PLL1 is not enabled to get the
|
|
|
|
|
* USB clock from PLL0:
|
|
|
|
|
*
|
|
|
|
|
* USBCLK = PLL0CLK / 10 = 48MHz
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define BOARD_USBCLKCFG_VALUE SYSCON_USBCLKCFG_DIV10
|
|
|
|
|
|
|
|
|
|
/* FLASH Configuration */
|
|
|
|
|
|
|
|
|
|
#undef CONFIG_LP17_FLASH
|
|
|
|
|
#define CONFIG_LP17_FLASH 1
|
|
|
|
|
#define BOARD_FLASHCFG_VALUE 0x0000403a
|
|
|
|
|
|
|
|
|
|
/* LED definitions ***********************************************************/
|
|
|
|
|
|
|
|
|
|
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the LEDs on the
|
|
|
|
|
* PNEV5180B board. The following definitions describe how NuttX controls the
|
|
|
|
|
* LEDs:
|
|
|
|
|
*/
|
|
|
|
|
/* LD201 LD200 LD202 LD203 */
|
|
|
|
|
/* RED ORANGE BLUE GREEN */
|
|
|
|
|
#define LED_STARTED 0 /* ON ON ON ON */
|
|
|
|
|
#define LED_HEAPALLOCATE 1 /* OFF OFF OFF ON */
|
|
|
|
|
#define LED_IRQSENABLED 2 /* OFF OFF ON OFF */
|
|
|
|
|
#define LED_STACKCREATED 3 /* OFF OFF OFF OFF */
|
|
|
|
|
#define LED_INIRQ 4 /* OFF OFF OFF ON (momentary) */
|
|
|
|
|
#define LED_SIGNAL 5 /* OFF OFF ON OFF (momentary) */
|
|
|
|
|
#define LED_ASSERTION 6 /* OFF ON OFF OFF (momentary) */
|
|
|
|
|
#define LED_PANIC 7 /* ON OFF OFF OFF (1Hz flashing) */
|
|
|
|
|
|
|
|
|
|
/* Alternate pin selections **************************************************/
|
|
|
|
|
|
|
|
|
|
/* Pin Description On Board Connector
|
|
|
|
|
* -------------------------------- ---------------- -------------
|
|
|
|
|
* P0.2/TXD0/AD0.7 TX J201
|
|
|
|
|
* P0.3/RXD0/AD0.6 RX
|
|
|
|
|
* P0.22/RTS1/TD1 LD200 ORANGE LED
|
|
|
|
|
* P0.15/TXD1/SCK0/SCK PN5180-SCK
|
|
|
|
|
* P0.16/RXD1/SSEL0/SSEL PN5180-SSEL PN5180
|
|
|
|
|
* P0.17/CTS1/MISO0/MISO PN5180-MISO
|
|
|
|
|
* P0.18/DCD1/M0SI0/MOSI PN5180-MOSI
|
|
|
|
|
* P0.19/DSR1/SDA1 EEPROM (Not Assembled)
|
|
|
|
|
* P0.20/DTR1/SCL1 EEPROM
|
|
|
|
|
* P0.21/RI1/RD1 PN5180-AUX2 PN5180
|
|
|
|
|
* P0.29/USB_D+ USB-D+ USB
|
|
|
|
|
* P0.30/USB_D- USB-D-
|
|
|
|
|
* P2.0/PWM1.1/TXD1 LD201 RED LED
|
|
|
|
|
* P2.5/PWM1.6/DTR1/TRACEDATA0 PN5180-nPN_RST
|
|
|
|
|
* P2.9/USB_CONNECT/RXD2 USB_CONNECT USB
|
|
|
|
|
* P2.11/nEINT1/I2STX_CLK PN5180-BUSY PN5180
|
|
|
|
|
* P2.12/nEINT2/I2STX_WS PN5180-IRQ
|
|
|
|
|
* P3.25/MAT0.0/PWM1.2 LD203 GREEN LED
|
|
|
|
|
* P3.26/STCLK/MAT0.1/PWM1.3 LD202 BLUE LED
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*****************************************************************************
|
|
|
|
|
* Public Types
|
|
|
|
|
*****************************************************************************/
|
|
|
|
|
|
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
|
|
|
|
|
|
/*****************************************************************************
|
|
|
|
|
* Public Data
|
|
|
|
|
*****************************************************************************/
|
|
|
|
|
|
|
|
|
|
#undef EXTERN
|
|
|
|
|
#if defined(__cplusplus)
|
|
|
|
|
#define EXTERN extern "C"
|
|
|
|
|
extern "C"
|
|
|
|
|
{
|
|
|
|
|
#else
|
|
|
|
|
#define EXTERN extern
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/*****************************************************************************
|
|
|
|
|
* Public Function Prototypes
|
|
|
|
|
*****************************************************************************/
|
|
|
|
|
|
|
|
|
|
/*****************************************************************************
|
2019-07-11 18:50:00 +02:00
|
|
|
* Name: lpc17_40_boardinitialize
|
2019-06-17 23:57:42 +02:00
|
|
|
*
|
|
|
|
|
* Description:
|
2019-08-13 18:08:49 +02:00
|
|
|
* All LPC17xx/LPC40xx architectures must provide the following entry point.
|
|
|
|
|
* This entry point is called early in the initialization -- after all
|
|
|
|
|
* memory has been configured and mapped but before any devices have
|
|
|
|
|
* been initialized.
|
2019-06-17 23:57:42 +02:00
|
|
|
*
|
|
|
|
|
*****************************************************************************/
|
|
|
|
|
|
2019-07-11 18:50:00 +02:00
|
|
|
void lpc17_40_boardinitialize(void);
|
2019-06-17 23:57:42 +02:00
|
|
|
|
|
|
|
|
/*****************************************************************************
|
2019-07-11 18:50:00 +02:00
|
|
|
* Name: lpc17_40_led
|
2019-06-17 23:57:42 +02:00
|
|
|
*
|
|
|
|
|
* Description:
|
|
|
|
|
* Once the system has booted, these functions can be used to control LED 1
|
|
|
|
|
*
|
|
|
|
|
*****************************************************************************/
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_ARCH_LEDS
|
2019-07-11 18:50:00 +02:00
|
|
|
void lpc17_40_led(int lednum, int state);
|
2019-06-17 23:57:42 +02:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#undef EXTERN
|
|
|
|
|
#if defined(__cplusplus)
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#endif /* __ASSEMBLY__ */
|
2020-01-31 19:07:39 +01:00
|
|
|
#endif /* __BOARDS_ARM_LPC17XX_40XX_PNEV5180_INCLUDE_BOARD_H */
|
