nuttx/net/netdev/netdev_findbyaddr.c

/****************************************************************************
 * net/netdev/netdev_findbyaddr.c
 *
 *   Copyright (C) 2007-2009, 2014-2015 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>
#if defined(CONFIG_NET) && CONFIG_NSOCKET_DESCRIPTORS > 0

#include <stdbool.h>
#include <string.h>
#include <errno.h>
#include <debug.h>

#include <nuttx/net/netdev.h>
#include <nuttx/net/ip.h>

#include "netdev/netdev.h"
#include "devif/devif.h"
#include "route/route.h"

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/****************************************************************************
 * Private Types
 ****************************************************************************/

/****************************************************************************
 * Private Data
 ****************************************************************************/

/****************************************************************************
 * Public Data
 ****************************************************************************/

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Function: netdev_finddevice_ipv4addr
 *
 * Description:
 *   Find a previously registered network device by matching a local address
 *   with the subnet served by the device.  Only "up" devices are considered
 *   (since a "down" device has no meaningful address).
 *
 * Parameters:
 *   ripaddr - Remote address of a connection to use in the lookup
 *
 * Returned Value:
 *  Pointer to driver on success; null on failure
 *
 * Assumptions:
 *  Called from normal user mode
 *
 ****************************************************************************/

#ifdef CONFIG_NET_IPv4
static FAR struct net_driver_s *netdev_finddevice_ipv4addr(in_addr_t ripaddr)
{
  FAR struct net_driver_s *dev;

  /* Examine each registered network device */

  netdev_semtake();
  for (dev = g_netdevices; dev; dev = dev->flink)
    {
      /* Is the interface in the "up" state? */

      if ((dev->d_flags & IFF_UP) != 0)
        {
          /* Yes.. check for an address match (under the netmask) */

          if (net_ipv4addr_maskcmp(dev->d_ipaddr, ripaddr,
                                   dev->d_netmask))
            {
              /* Its a match */

              netdev_semgive();
              return dev;
            }
        }
    }

  /* No device with the matching address found */

  netdev_semgive();
  return NULL;
}
#endif /* CONFIG_NET_IPv4 */

/****************************************************************************
 * Function: netdev_finddevice_ipv6addr
 *
 * Description:
 *   Find a previously registered network device by matching a local address
 *   with the subnet served by the device.  Only "up" devices are considered
 *   (since a "down" device has no meaningful address).
 *
 * Parameters:
 *   ripaddr - Remote address of a connection to use in the lookup
 *
 * Returned Value:
 *  Pointer to driver on success; null on failure
 *
 * Assumptions:
 *  Called from normal user mode
 *
 ****************************************************************************/

#ifdef CONFIG_NET_IPv6
static FAR struct net_driver_s *
netdev_finddevice_ipv6addr(const net_ipv6addr_t ripaddr)
{
  FAR struct net_driver_s *dev;

  /* Examine each registered network device */

  netdev_semtake();
  for (dev = g_netdevices; dev; dev = dev->flink)
    {
      /* Is the interface in the "up" state? */

      if ((dev->d_flags & IFF_UP) != 0)
        {
          /* Yes.. check for an address match (under the netmask) */

          if (net_ipv6addr_maskcmp(dev->d_ipv6addr, ripaddr,
                                   dev->d_ipv6netmask))
            {
              /* Its a match */

              netdev_semgive();
              return dev;
            }
        }
    }

  /* No device with the matching address found */

  netdev_semgive();
  return NULL;
}
#endif /* CONFIG_NET_IPv6 */

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Function: netdev_findby_ipv4addr
 *
 * Description:
 *   Find a previously registered network device by matching an arbitrary
 *   IPv4 address.
 *
 * Parameters:
 *   lipaddr - Local, bound address of a connection.  Used only if ripaddr
 *     is the broadcast address.  Used only if CONFIG_NET_MULTILINK.
 *   ripaddr - Remote address of a connection to use in the lookup
 *
 * Returned Value:
 *  Pointer to driver on success; null on failure
 *
 * Assumptions:
 *  Called from normal user mode
 *
 ****************************************************************************/

#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_MULTILINK
FAR struct net_driver_s *netdev_findby_ipv4addr(in_addr_t lipaddr,
                                                in_addr_t ripaddr)
#else
FAR struct net_driver_s *netdev_findby_ipv4addr(in_addr_t ripaddr)
#endif
{
  struct net_driver_s *dev;
#ifdef CONFIG_NET_ROUTE
  in_addr_t router;
  int ret;
#endif

  /* First, check if this is the broadcast IP address */

  if (net_ipv4addr_cmp(ripaddr, g_ipv4_alloneaddr))
    {
#ifdef CONFIG_NET_MULTILINK
      /* Yes.. Check the local, bound address.  Is it INADDR_ANY? */

      if (net_ipv4addr_cmp(lipaddr, g_ipv4_allzeroaddr))
        {
          /* Yes.. In this case, I think we are supposed to send the
           * broadcast packet out ALL local networks.  I am not sure
           * of that and, in any event, there is nothing we can do
           * about that here.
           */

          return NULL;
        }
      else
        {
          /* Return the device associated with the local address */

          return netdev_finddevice_ipv4addr(lipaddr);
        }
#else
      /* If there is only a single, registered network interface, then the
       * decision is pretty easy.
       */

      return g_netdevices;
#endif
    }

  /* Check if the address maps to a local network */

  dev = netdev_finddevice_ipv4addr(ripaddr);
  if (dev)
    {
      return dev;
    }

  /* No.. The address lies on an external network */

#ifdef CONFIG_NET_ROUTE
  /* If we have a routing table, then perhaps we can find the local
   * address of a router that can forward packets to the external network.
   */

  ret = net_ipv4_router(ripaddr, &router);
  if (ret >= 0)
    {
      /* Success... try to find the network device associated with the local
       * router address
       */

      dev = netdev_finddevice_ipv4addr(router);
      if (dev)
        {
          return dev;
        }
    }
#endif /* CONFIG_NET_ROUTE */

  /* The above lookup will fail if the packet is being sent out of our
   * out subnet to a router and there is no routing information.
   */

#ifndef CONFIG_NET_MULTILINK
   /* If there is only a single, registered network interface, then the
    * decision is pretty easy.  Use that device and its default router
    * address.
    */

   dev = g_netdevices;
#endif

  /* If we will did not find the network device, then we might as well fail
   * because we are not configured properly to determine the route to the
   * destination.
   */

  return dev;
}
#endif /* CONFIG_NET_IPv4 */

/****************************************************************************
 * Function: netdev_findby_ipv6addr
 *
 * Description:
 *   Find a previously registered network device by matching an arbitrary
 *   IPv6 address.
 *
 * Parameters:
 *   lipaddr - Local, bound address of a connection.  Used only if ripaddr
 *     is the broadcast address.  Used only if CONFIG_NET_MULTILINK.
 *   ripaddr - Remote address of a connection to use in the lookup
 *
 * Returned Value:
 *  Pointer to driver on success; null on failure
 *
 * Assumptions:
 *  Called from normal user mode
 *
 ****************************************************************************/

#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_MULTILINK
FAR struct net_driver_s *netdev_findby_ipv6addr(const net_ipv6addr_t lipaddr,
                                                const net_ipv6addr_t ripaddr)
#else
FAR struct net_driver_s *netdev_findby_ipv6addr(const net_ipv6addr_t ripaddr)
#endif
{
  struct net_driver_s *dev;
#ifdef CONFIG_NET_ROUTE
  net_ipv6addr_t router;
  int ret;
#endif

  /* First, check if this is the broadcast IP address */

  if (net_ipv6addr_cmp(ripaddr, g_ipv6_alloneaddr))
    {
#ifdef CONFIG_NET_MULTILINK
      /* Yes.. Check the local, bound address.  Is it INADDR_ANY? */

      if (net_ipv6addr_cmp(lipaddr, g_ipv6_allzeroaddr))
        {
          /* Yes.. In this case, I think we are supposed to send the
           * broadcast packet out ALL local networks.  I am not sure
           * of that and, in any event, there is nothing we can do
           * about that here.
           */

          return NULL;
        }
      else
        {
          /* Return the device associated with the local address */

          return netdev_finddevice_ipv6addr(lipaddr);
        }
#else
      /* If there is only a single, registered network interface, then the
       * decision is pretty easy.
       */

      return g_netdevices;
#endif
    }

  /* Check if the address maps to a local network */

  dev = netdev_finddevice_ipv6addr(ripaddr);
  if (dev)
    {
      return dev;
    }

  /* No.. The address lies on an external network */

#ifdef CONFIG_NET_ROUTE
  /* If we have a routing table, then perhaps we can find the local
   * address of a router that can forward packets to the external network.
   */

  ret = net_ipv6_router(ripaddr, router);
  if (ret >= 0)
    {
      /* Success... try to find the network device associated with the local
       * router address
       */

      dev = netdev_finddevice_ipv6addr(router);
      if (dev)
        {
          return dev;
        }
    }
#endif /* CONFIG_NET_ROUTE */

  /* The above lookup will fail if the packet is being sent out of our
   * out subnet to a router and there is no routing information.
   */

#ifndef CONFIG_NET_MULTILINK
   /* If there is only a single, registered network interface, then the
    * decision is pretty easy.  Use that device and its default router
    * address.
    */

   dev = g_netdevices;
#endif

  /* If we will did not find the network device, then we might as well fail
   * because we are not configured properly to determine the route to the
   * destination.
   */

  return dev;
}
#endif /* CONFIG_NET_IPv6 */

#endif /* CONFIG_NET && CONFIG_NSOCKET_DESCRIPTORS */