46 lines
1.7 KiB
Plaintext
46 lines
1.7 KiB
Plaintext
|
README for the Espressif ESP Wrover Kit
|
|||
|
|
==============================================
|
|||
|
|
|
|||
|
|
The ESP32 is a dual-core system from Espressif with two Harvard
|
|||
|
|
architecture Xtensa LX6 CPUs. All embedded memory, external memory and
|
|||
|
|
peripherals are located on the data bus and/or the instruction bus of
|
|||
|
|
these CPUs. With some minor exceptions, the address mapping of two CPUs
|
|||
|
|
is symmetric, meaning they use the same addresses to access the same
|
|||
|
|
memory. Multiple peripherals in the system can access embedded memory via
|
|||
|
|
DMA.
|
|||
|
|
|
|||
|
|
ESP-WROVER-KIT is an ESP32-based development board produced by Espressif.
|
|||
|
|
|
|||
|
|
ESP-WROVER-KIT features the following integrated components:
|
|||
|
|
ESP32-WROVER-B module
|
|||
|
|
LCD screen
|
|||
|
|
MicroSD card slot
|
|||
|
|
|
|||
|
|
Its another distinguishing feature is the embedded FTDI FT2232HL chip,
|
|||
|
|
an advanced multi-interface USB bridge. This chip enables to use JTAG
|
|||
|
|
for direct debugging of ESP32 through the USB interface without a separate
|
|||
|
|
JTAG debugger. ESP-WROVER-KIT makes development convenient, easy, and
|
|||
|
|
cost-effective.
|
|||
|
|
|
|||
|
|
Most of the ESP32 I/O pins are broken out to the board’s pin headers for easy access.
|
|||
|
|
|
|||
|
|
Buttons and LEDs
|
|||
|
|
================
|
|||
|
|
|
|||
|
|
Buttons
|
|||
|
|
-------
|
|||
|
|
There are two buttons labeled Boot and EN. The EN button is not available
|
|||
|
|
to software. It pulls the chip enable line that doubles as a reset line.
|
|||
|
|
|
|||
|
|
The BOOT button is connected to IO0. On reset it is used as a strapping
|
|||
|
|
pin to determine whether the chip boots normally or into the serial
|
|||
|
|
bootloader. After reset, however, the BOOT button can be used for software
|
|||
|
|
input.
|
|||
|
|
|
|||
|
|
LEDs
|
|||
|
|
----
|
|||
|
|
There are several on-board LEDs for that indicate the presence of power
|
|||
|
|
and USB activity.
|
|||
|
|
There is an RGB LED available for software.
|
|||
|
|
|