nuttx/tools/LibTargets.mk

226 lines
8.2 KiB
Makefile
Raw Normal View History

############################################################################
# tools/LibTargets.mk
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
#
############################################################################
# Archive targets. The target build sequence will first create a series of
# libraries, one per configured source file directory. The final NuttX
# execution will then be built from those libraries. The following targets
# build those libraries.
#
# Possible kernel-mode builds
libs$(DELIM)libc$(DELIM)libkc$(LIBEXT): pass2dep
$(Q) $(MAKE) -C libs$(DELIM)libc libkc$(LIBEXT) BINDIR=kbin EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libkc$(LIBEXT): libs$(DELIM)libc$(DELIM)libkc$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
libs$(DELIM)libnx$(DELIM)libknx$(LIBEXT): pass2dep
$(Q) $(MAKE) -C libs$(DELIM)libnx libknx$(LIBEXT) BINDIR=kbin EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libknx$(LIBEXT): libs$(DELIM)libnx$(DELIM)libknx$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
mm$(DELIM)libkmm$(LIBEXT): pass2dep
$(Q) $(MAKE) -C mm libkmm$(LIBEXT) BINDIR=kbin EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libkmm$(LIBEXT): mm$(DELIM)libkmm$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
$(ARCH_SRC)$(DELIM)libkarch$(LIBEXT): pass2dep
$(Q) $(MAKE) -C $(ARCH_SRC) libkarch$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libkarch$(LIBEXT): $(ARCH_SRC)$(DELIM)libkarch$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
pass1$(DELIM)libpass1$(LIBEXT): pass2dep
$(Q) $(MAKE) -C pass1 libpass1$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libpass1$(LIBEXT): pass1$(DELIM)libpass1$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
sched$(DELIM)libsched$(LIBEXT): pass2dep
$(Q) $(MAKE) -C sched libsched$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libsched$(LIBEXT): sched$(DELIM)libsched$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
net$(DELIM)libnet$(LIBEXT): pass2dep
$(Q) $(MAKE) -C net libnet$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libnet$(LIBEXT): net$(DELIM)libnet$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
boards$(DELIM)libboards$(LIBEXT): pass2dep
$(Q) $(MAKE) -C boards libboards$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
Merged in alinjerpelea/nuttx (pull request #963) Move boards to boards folder * boards: rename configs folder to boards This is the proposed layout after the change: boards: - folder containing board folders <board>: - name of each board drivers: - extra drivers specific for platform include: - header files for the boars scripts: - extra scripts specific for platform src: - board specific code tools: - extra tools specific for platform <config>: - board specific configuration(s) Note: <xxx> names are dependent on platform This is a logical change to aim to the arch layout but this is a huge change it should be done in several steps to lower the risk. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Kconfig: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile.*: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Make.defs: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .sh: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .mk: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .c & .h: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .bat: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 14:04:14 +02:00
staging$(DELIM)libboards$(LIBEXT): boards$(DELIM)libboards$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
$(ARCH_SRC)$(DELIM)board$(DELIM)libboard$(LIBEXT): pass2dep
$(Q) $(MAKE) -C $(ARCH_SRC)/board libboard$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libboard$(LIBEXT): $(ARCH_SRC)$(DELIM)board$(DELIM)libboard$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
crypto$(DELIM)libcrypto$(LIBEXT): pass2dep
$(Q) $(MAKE) -C crypto libcrypto$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libcrypto$(LIBEXT): crypto$(DELIM)libcrypto$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
fs$(DELIM)libfs$(LIBEXT): pass2dep
$(Q) $(MAKE) -C fs libfs$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libfs$(LIBEXT): fs$(DELIM)libfs$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
drivers$(DELIM)libdrivers$(LIBEXT): pass2dep
$(Q) $(MAKE) -C drivers libdrivers$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libdrivers$(LIBEXT): drivers$(DELIM)libdrivers$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
external$(DELIM)libexternal$(LIBEXT): pass2dep
$(Q) $(MAKE) -C external libexternal$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libexternal$(LIBEXT): external$(DELIM)libexternal$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
binfmt$(DELIM)libbinfmt$(LIBEXT): pass2dep
$(Q) $(MAKE) -C binfmt libbinfmt$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libbinfmt$(LIBEXT): binfmt$(DELIM)libbinfmt$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
graphics$(DELIM)libgraphics$(LIBEXT): pass2dep
$(Q) $(MAKE) -C graphics libgraphics$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libgraphics$(LIBEXT): graphics$(DELIM)libgraphics$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
audio$(DELIM)libaudio$(LIBEXT): pass2dep
$(Q) $(MAKE) -C audio libaudio$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libaudio$(LIBEXT): audio$(DELIM)libaudio$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
video$(DELIM)libvideo$(LIBEXT): pass2dep
$(Q) $(MAKE) -C video libvideo$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libvideo$(LIBEXT): video$(DELIM)libvideo$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
wireless$(DELIM)libwireless$(LIBEXT): pass2dep
$(Q) $(MAKE) -C wireless libwireless$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
2016-02-27 00:07:04 +01:00
staging$(DELIM)libwireless$(LIBEXT): wireless$(DELIM)libwireless$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
2016-02-27 00:07:04 +01:00
openamp$(DELIM)libopenamp$(LIBEXT): pass2dep
$(Q) $(MAKE) -C openamp libopenamp$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
staging$(DELIM)libopenamp$(LIBEXT): openamp$(DELIM)libopenamp$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
syscall$(DELIM)libstubs$(LIBEXT): pass2dep
$(Q) $(MAKE) -C syscall libstubs$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libstubs$(LIBEXT): syscall$(DELIM)libstubs$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
syscall$(DELIM)libwraps$(LIBEXT): pass2dep
$(Q) $(MAKE) -C syscall libwraps$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
staging$(DELIM)libwraps$(LIBEXT): syscall$(DELIM)libwraps$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
# Special case
ifeq ($(CONFIG_BUILD_FLAT),y)
$(ARCH_SRC)$(DELIM)libarch$(LIBEXT): pass2dep
$(Q) $(MAKE) -C $(ARCH_SRC) libarch$(LIBEXT) EXTRAFLAGS="$(KDEFINE) $(EXTRAFLAGS)"
else
$(ARCH_SRC)$(DELIM)libarch$(LIBEXT): pass1dep
$(Q) $(MAKE) -C $(ARCH_SRC) libarch$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"
endif
staging$(DELIM)libarch$(LIBEXT): $(ARCH_SRC)$(DELIM)libarch$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
# Possible user-mode builds
ifeq ($(CONFIG_BUILD_FLAT),y)
libs$(DELIM)libc$(DELIM)libc$(LIBEXT): pass2dep
else
libs$(DELIM)libc$(DELIM)libc$(LIBEXT): pass1dep
endif
$(Q) $(MAKE) -C libs$(DELIM)libc libc$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"
staging$(DELIM)libc$(LIBEXT): libs$(DELIM)libc$(DELIM)libc$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
ifeq ($(CONFIG_BUILD_FLAT),y)
libs$(DELIM)libnx$(DELIM)libnx$(LIBEXT): pass2dep
else
libs$(DELIM)libnx$(DELIM)libnx$(LIBEXT): pass1dep
endif
$(Q) $(MAKE) -C libs$(DELIM)libnx libnx$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"
staging$(DELIM)libnx$(LIBEXT): libs$(DELIM)libnx$(DELIM)libnx$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
ifeq ($(CONFIG_BUILD_FLAT),y)
mm$(DELIM)libmm$(LIBEXT): pass2dep
else
mm$(DELIM)libmm$(LIBEXT): pass1dep
endif
$(Q) $(MAKE) -C mm libmm$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"
staging$(DELIM)libmm$(LIBEXT): mm$(DELIM)libmm$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
libs$(DELIM)libxx$(DELIM)libxx$(LIBEXT): pass1dep
$(Q) $(MAKE) -C libs$(DELIM)libxx libxx$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"
staging$(DELIM)libxx$(LIBEXT): libs$(DELIM)libxx$(DELIM)libxx$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
libs$(DELIM)libdsp$(DELIM)libdsp$(LIBEXT): pass2dep
$(Q) $(MAKE) -C libs$(DELIM)libdsp libdsp$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"
staging$(DELIM)libdsp$(LIBEXT): libs$(DELIM)libdsp$(DELIM)libdsp$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
ifeq ($(CONFIG_BUILD_FLAT),y)
$(APPDIR)$(DELIM)libapps$(LIBEXT): pass2dep
else
$(APPDIR)$(DELIM)libapps$(LIBEXT): pass1dep
endif
$(Q) $(MAKE) -C $(APPDIR) EXTRAFLAGS="$(EXTRAFLAGS)"
staging$(DELIM)libapps$(LIBEXT): $(APPDIR)$(DELIM)libapps$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)
syscall$(DELIM)libproxies$(LIBEXT): pass1dep
$(Q) $(MAKE) -C syscall libproxies$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"
staging$(DELIM)libproxies$(LIBEXT): syscall$(DELIM)libproxies$(LIBEXT)
$(Q) $(call INSTALL_LIB,$<,$@)