nuttx/configs/mikroe-stm32f4/src/Makefile

############################################################################
# configs/mikroe-stm32f4/src/Makefile
#
#   Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
#   Author: Gregory Nutt <gnutt@nuttx.org>
#
#   Updates: 04/15/2013 - Ken Pettit
#               - Modifications for port to Mikroe for STM32F4
#               - Added support for LCD, Serial Flash, SD Card
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with the
#    distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
#    used to endorse or promote products derived from this software
#    without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################

-include $(TOPDIR)/Make.defs

CFLAGS += -I$(TOPDIR)/sched

ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))

CSRCS = up_boot.c up_spi.c

ifeq ($(CONFIG_HAVE_CXX),y)
CSRCS += up_cxxinitialize.c
endif

ifeq ($(CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG),y)
CSRCS += up_clockconfig.c
endif

ifeq ($(CONFIG_STM32_OTGFS),y)
CSRCS += up_usb.c
endif

ifeq ($(CONFIG_PWM),y)
CSRCS += up_pwm.c
endif

ifeq ($(CONFIG_QENCODER),y)
CSRCS += up_qencoder.c
endif

ifeq ($(CONFIG_WATCHDOG),y)
CSRCS += up_watchdog.c
endif

ifeq ($(CONFIG_NSH_ARCHINIT),y)
CSRCS += up_nsh.c
endif

ifeq ($(CONFIG_PM_CUSTOMINIT),y)
CSRCS += up_pm.c
endif

ifeq ($(CONFIG_IDLE_CUSTOM),y)
CSRCS += up_idle.c
endif

ifeq ($(CONFIG_STM32_FSMC),y)
CSRCS += up_extmem.c
endif

ifeq ($(CONFIG_INPUT),y)
CSRCS += up_touchscreen.c
endif

ifeq ($(CONFIG_LCD_MIO283QT2),y)
CSRCS += up_mio283qt2.c
endif

ifeq ($(CONFIG_VS1053),y)
CSRCS += up_vs1053.c
endif

COBJS = $(CSRCS:.c=$(OBJEXT))

SRCS = $(ASRCS) $(CSRCS)
OBJS = $(AOBJS) $(COBJS)

ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
ifeq ($(CONFIG_WINDOWS_NATIVE),y)
  CFLAGS += -I$(ARCH_SRCDIR)\chip -I$(ARCH_SRCDIR)\common -I$(ARCH_SRCDIR)\armv7-m
else
ifeq ($(WINTOOL),y)
  CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
			-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
			-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
else
  CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
endif
endif

all: libboard$(LIBEXT)

$(AOBJS): %$(OBJEXT): %.S
	$(call ASSEMBLE, $<, $@)

$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
	$(call COMPILE, $<, $@)

libboard$(LIBEXT): $(OBJS)
	$(call ARCHIVE, $@, $(OBJS))

.depend: Makefile $(SRCS)
	$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
	$(Q) touch $@

depend: .depend

clean:
	$(call DELFILE, libboard$(LIBEXT))
	$(call CLEAN)

distclean: clean
	$(call DELFILE, Make.dep)
	$(call DELFILE, .depend)

-include Make.dep