nuttx/net/nat/ipv4_nat_entry.c

/****************************************************************************
 * net/nat/ipv4_nat_entry.c
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <debug.h>
#include <stdint.h>

#include <nuttx/clock.h>
#include <nuttx/hashtable.h>
#include <nuttx/kmalloc.h>
#include <nuttx/nuttx.h>
#include <nuttx/queue.h>

#include "icmp/icmp.h"
#include "nat/nat.h"
#include "tcp/tcp.h"
#include "udp/udp.h"

#if defined(CONFIG_NET_NAT) && defined(CONFIG_NET_IPv4)

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/* TODO: Why we limit to 32000 in net stack? */

#define NAT_PORT_REASSIGN_MAX 32000
#define NAT_PORT_REASSIGN_MIN 4096

/****************************************************************************
 * Private Data
 ****************************************************************************/

static DECLARE_HASHTABLE(g_table_inbound, CONFIG_NET_NAT_HASH_BITS);
static DECLARE_HASHTABLE(g_table_outbound, CONFIG_NET_NAT_HASH_BITS);

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Name: ipv4_nat_inbound_key
 *
 * Description:
 *   Create an inbound hash key for NAT.
 *
 ****************************************************************************/

static inline uint32_t ipv4_nat_inbound_key(in_addr_t external_ip,
                                            uint16_t external_port,
                                            uint8_t protocol)
{
  return NTOHL(external_ip) ^ /* external ip may different in higher bits. */
         ((uint32_t)protocol << 16) ^ external_port;
}

/****************************************************************************
 * Name: ipv4_nat_outbound_key
 *
 * Description:
 *   Create an outbound hash key for NAT.
 *
 ****************************************************************************/

static inline uint32_t ipv4_nat_outbound_key(in_addr_t local_ip,
                                             uint16_t local_port,
                                             uint8_t protocol)
{
  return NTOHL(local_ip) ^ /* NTOHL makes sure difference is in lower bits. */
         ((uint32_t)protocol << 8) ^ ((uint32_t)local_port << 16);
}

/****************************************************************************
 * Name: ipv4_nat_select_port_without_stack
 *
 * Description:
 *   Select an available port number for TCP/UDP protocol, or id for ICMP.
 *   Used when corresponding stack is disabled.
 *
 * Input Parameters:
 *   protocol   - The L4 protocol of the packet.
 *   ip         - The IP bind with the port (in network byte order).
 *   portno     - The local port (in network byte order), as reference.
 *
 * Returned Value:
 *   port number on success; 0 on failure
 *
 ****************************************************************************/

#if (defined(CONFIG_NET_TCP) && defined(CONFIG_NET_TCP_NO_STACK)) || \
    (defined(CONFIG_NET_UDP) && defined(CONFIG_NET_UDP_NO_STACK)) || \
    (defined(CONFIG_NET_ICMP) && !defined(CONFIG_NET_ICMP_SOCKET))

static uint16_t ipv4_nat_select_port_without_stack(
    uint8_t protocol, in_addr_t ip, uint16_t portno)
{
  uint16_t hport = NTOHS(portno);
  while (ipv4_nat_port_inuse(protocol, ip, portno))
    {
      if (++hport >= NAT_PORT_REASSIGN_MAX)
        {
          hport = NAT_PORT_REASSIGN_MIN;
        }

      portno = HTONS(hport);
    }

  return portno;
}

#endif

/****************************************************************************
 * Name: ipv4_nat_select_port
 *
 * Description:
 *   Select an available port number for TCP/UDP protocol, or id for ICMP.
 *
 * Input Parameters:
 *   dev        - The device on which the packet will be sent.
 *   protocol   - The L4 protocol of the packet.
 *   local_port - The local port of the packet, as reference.
 *
 * Returned Value:
 *   port number on success; 0 on failure
 *
 ****************************************************************************/

static uint16_t ipv4_nat_select_port(FAR struct net_driver_s *dev,
                                     uint8_t protocol,
                                     uint16_t local_port)
{
  switch (protocol)
    {
#ifdef CONFIG_NET_TCP
      case IP_PROTO_TCP:
        {
#ifndef CONFIG_NET_TCP_NO_STACK
          /* Try to select local_port first. */

          int ret = tcp_selectport(PF_INET,
                        (FAR const union ip_addr_u *)&dev->d_ipaddr,
                        local_port);

          /* If failed, try select another unused port. */

          if (ret < 0)
            {
              ret = tcp_selectport(PF_INET,
                        (FAR const union ip_addr_u *)&dev->d_ipaddr, 0);
            }

          return ret > 0 ? ret : 0;
#else
          return ipv4_nat_select_port_without_stack(IP_PROTO_TCP,
                                                    dev->d_ipaddr,
                                                    local_port);
#endif
        }
#endif

#ifdef CONFIG_NET_UDP
      case IP_PROTO_UDP:
        {
#ifndef CONFIG_NET_UDP_NO_STACK
          union ip_binding_u u;
          u.ipv4.laddr = dev->d_ipaddr;
          u.ipv4.raddr = INADDR_ANY;

          /* TODO: Try keep origin port as possible. */

          return HTONS(udp_select_port(PF_INET, &u));
#else
          return ipv4_nat_select_port_without_stack(IP_PROTO_UDP,
                                                    dev->d_ipaddr,
                                                    local_port);
#endif
        }
#endif

#ifdef CONFIG_NET_ICMP
      case IP_PROTO_ICMP:
        {
#ifdef CONFIG_NET_ICMP_SOCKET
          uint16_t id = local_port;
          uint16_t hid = NTOHS(id);
          while (icmp_findconn(dev, id) ||
                 ipv4_nat_port_inuse(IP_PROTO_ICMP, dev->d_ipaddr, id))
            {
              if (++hid >= NAT_PORT_REASSIGN_MAX)
                {
                  hid = NAT_PORT_REASSIGN_MIN;
                }

              id = HTONS(hid);
            }

          return id;
#else
          return ipv4_nat_select_port_without_stack(IP_PROTO_ICMP,
                                                    dev->d_ipaddr,
                                                    local_port);
#endif
        }
#endif
    }

  /* TODO: Currently select original port for unsupported protocol, maybe
   * return zero to indicate failure.
   */

  return local_port;
}

/****************************************************************************
 * Name: ipv4_nat_entry_refresh
 *
 * Description:
 *   Refresh a NAT entry, update its expiration time.
 *
 * Input Parameters:
 *   entry      - The entry to refresh.
 *
 ****************************************************************************/

static void ipv4_nat_entry_refresh(FAR struct ipv4_nat_entry *entry)
{
  /* Note: May add logic here to move recent node to head side if each chain
   * in hashtable is still too long (with long expire time).
   */

  switch (entry->protocol)
    {
#ifdef CONFIG_NET_TCP
      case IP_PROTO_TCP:
        /* NOTE: According to RFC2663, Section 2.6, Page 5, we can reduce the
         * time to 4min if we have received FINs from both side of one
         * connection, and keep 24h for other TCP connections. However, full
         * cone NAT may have multiple connections on one entry, so this
         * optimization may not work and we only use one expiration time.
         */

        entry->expire_time = TICK2SEC(clock_systime_ticks()) +
                             CONFIG_NET_NAT_TCP_EXPIRE_SEC;
        break;
#endif

#ifdef CONFIG_NET_UDP
      case IP_PROTO_UDP:
        entry->expire_time = TICK2SEC(clock_systime_ticks()) +
                             CONFIG_NET_NAT_UDP_EXPIRE_SEC;
        break;
#endif

#ifdef CONFIG_NET_ICMP
      case IP_PROTO_ICMP:
        entry->expire_time = TICK2SEC(clock_systime_ticks()) +
                             CONFIG_NET_NAT_ICMP_EXPIRE_SEC;
        break;
#endif
  }
}

/****************************************************************************
 * Name: ipv4_nat_entry_create
 *
 * Description:
 *   Create a NAT entry and insert into entry list.
 *
 * Input Parameters:
 *   protocol      - The L4 protocol of the packet.
 *   external_ip   - The external ip of the packet.
 *   external_port - The external port of the packet.
 *   local_ip      - The local ip of the packet.
 *   local_port    - The local port of the packet.
 *   peer_ip       - The peer ip of the packet.
 *   peer_port     - The peer port of the packet.
 *
 * Returned Value:
 *   Pointer to entry on success; null on failure
 *
 ****************************************************************************/

static FAR struct ipv4_nat_entry *
ipv4_nat_entry_create(uint8_t protocol,
                      in_addr_t external_ip, uint16_t external_port,
                      in_addr_t local_ip, uint16_t local_port,
                      in_addr_t peer_ip, uint16_t peer_port)
{
  FAR struct ipv4_nat_entry *entry =
      kmm_malloc(sizeof(struct ipv4_nat_entry));
  if (entry == NULL)
    {
      nwarn("WARNING: Failed to allocate IPv4 NAT entry\n");
      return NULL;
    }

  entry->protocol      = protocol;
  entry->external_ip   = external_ip;
  entry->external_port = external_port;
  entry->local_ip      = local_ip;
  entry->local_port    = local_port;
#ifdef CONFIG_NET_NAT_SYMMETRIC
  entry->peer_ip       = peer_ip;
  entry->peer_port     = peer_port;
#endif

  ipv4_nat_entry_refresh(entry);

  hashtable_add(g_table_inbound, &entry->hash_inbound,
                ipv4_nat_inbound_key(external_ip, external_port, protocol));
  hashtable_add(g_table_outbound, &entry->hash_outbound,
                ipv4_nat_outbound_key(local_ip, local_port, protocol));

  return entry;
}

/****************************************************************************
 * Name: ipv4_nat_entry_delete
 *
 * Description:
 *   Delete a NAT entry and remove from entry list.
 *
 * Input Parameters:
 *   entry      - The entry to remove.
 *
 ****************************************************************************/

static void ipv4_nat_entry_delete(FAR struct ipv4_nat_entry *entry)
{
  ninfo("INFO: Removing NAT entry proto=%" PRIu8
        ", local=%" PRIx32 ":%" PRIu16 ", external=:%" PRIu16 "\n",
        entry->protocol, entry->local_ip, entry->local_port,
        entry->external_port);

  hashtable_delete(g_table_inbound, &entry->hash_inbound,
                   ipv4_nat_inbound_key(entry->external_ip,
                                        entry->external_port,
                                        entry->protocol));
  hashtable_delete(g_table_outbound, &entry->hash_outbound,
                   ipv4_nat_outbound_key(entry->local_ip,
                                         entry->local_port,
                                         entry->protocol));

  kmm_free(entry);
}

/****************************************************************************
 * Name: ipv4_nat_reclaim_entry
 *
 * Description:
 *   Try reclaim all expired NAT entries.
 *   Only works after every CONFIG_NET_NAT_ENTRY_RECLAIM_SEC (low frequency).
 *
 *   Although expired entries will be automatically reclaimed when matching
 *   inbound/outbound entries, there might be some situations that entries
 *   will be kept in memory, e.g. big hashtable with only a few connections.
 *
 * Assumptions:
 *   NAT is initialized.
 *
 ****************************************************************************/

#if CONFIG_NET_NAT_ENTRY_RECLAIM_SEC > 0
static void ipv4_nat_reclaim_entry(int32_t current_time)
{
  static int32_t next_reclaim_time = CONFIG_NET_NAT_ENTRY_RECLAIM_SEC;

  if (next_reclaim_time - current_time <= 0)
    {
      FAR hash_node_t *p;
      FAR hash_node_t *tmp;
      int count = 0;
      int i;

      ninfo("INFO: Reclaiming all expired NAT entries.\n");

      hashtable_for_every_safe(g_table_inbound, p, tmp, i)
        {
          FAR struct ipv4_nat_entry *entry =
            container_of(p, struct ipv4_nat_entry, hash_inbound);

          if (entry->expire_time - current_time <= 0)
            {
              ipv4_nat_entry_delete(entry);
              count++;
            }
        }

      ninfo("INFO: %d expired NAT entries reclaimed.\n", count);
      next_reclaim_time = current_time + CONFIG_NET_NAT_ENTRY_RECLAIM_SEC;
    }
}
#endif

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: ipv4_nat_entry_clear
 *
 * Description:
 *   Clear all entries related to dev. Called when NAT will be disabled on
 *   any device.
 *
 * Input Parameters:
 *   dev        - The device on which NAT entries will be cleared.
 *
 * Assumptions:
 *   NAT is initialized.
 *
 ****************************************************************************/

void ipv4_nat_entry_clear(FAR struct net_driver_s *dev)
{
  FAR hash_node_t *p;
  FAR hash_node_t *tmp;
  int i;

  ninfo("INFO: Clearing all NAT entries for %s\n", dev->d_ifname);

  hashtable_for_every_safe(g_table_inbound, p, tmp, i)
    {
      FAR struct ipv4_nat_entry *entry =
        container_of(p, struct ipv4_nat_entry, hash_inbound);

      if (net_ipv4addr_cmp(entry->external_ip, dev->d_ipaddr))
        {
          ipv4_nat_entry_delete(entry);
        }
    }
}

/****************************************************************************
 * Name: ipv4_nat_inbound_entry_find
 *
 * Description:
 *   Find the inbound entry in NAT entry list.
 *
 * Input Parameters:
 *   protocol      - The L4 protocol of the packet.
 *   external_ip   - The external ip of the packet, supports INADDR_ANY.
 *   external_port - The external port of the packet.
 *   peer_ip       - The peer ip of the packet.
 *   peer_port     - The peer port of the packet.
 *   refresh       - Whether to refresh the selected entry.
 *
 * Returned Value:
 *   Pointer to entry on success; null on failure
 *
 ****************************************************************************/

FAR struct ipv4_nat_entry *
ipv4_nat_inbound_entry_find(uint8_t protocol, in_addr_t external_ip,
                            uint16_t external_port, in_addr_t peer_ip,
                            uint16_t peer_port, bool refresh)
{
  FAR hash_node_t *p;
  FAR hash_node_t *tmp;
  bool skip_ip = net_ipv4addr_cmp(external_ip, INADDR_ANY);
#ifdef CONFIG_NET_NAT_SYMMETRIC
  bool skip_peer = net_ipv4addr_cmp(peer_ip, INADDR_ANY);
#endif
  int32_t current_time = TICK2SEC(clock_systime_ticks());

#if CONFIG_NET_NAT_ENTRY_RECLAIM_SEC > 0
  ipv4_nat_reclaim_entry(current_time);
#endif

  hashtable_for_every_possible_safe(g_table_inbound, p, tmp,
                  ipv4_nat_inbound_key(external_ip, external_port, protocol))
    {
      FAR struct ipv4_nat_entry *entry =
        container_of(p, struct ipv4_nat_entry, hash_inbound);

      /* Remove expired entries. */

      if (entry->expire_time - current_time <= 0)
        {
          ipv4_nat_entry_delete(entry);
          continue;
        }

      if (entry->protocol == protocol &&
          (skip_ip || net_ipv4addr_cmp(entry->external_ip, external_ip)) &&
          entry->external_port == external_port
#ifdef CONFIG_NET_NAT_SYMMETRIC
          && (skip_peer || (net_ipv4addr_cmp(entry->peer_ip, peer_ip) &&
                            entry->peer_port == peer_port))
#endif
          )
        {
          if (refresh)
            {
              ipv4_nat_entry_refresh(entry);
            }

          return entry;
        }
    }

  if (refresh) /* false = a test of whether entry exists, no need to warn */
    {
      nwarn("WARNING: Failed to find IPv4 inbound NAT entry for "
            "proto=%" PRIu8 ", external=%" PRIx32 ":%" PRIu16 "\n",
            protocol, external_ip, external_port);
    }

  return NULL;
}

/****************************************************************************
 * Name: ipv4_nat_outbound_entry_find
 *
 * Description:
 *   Find the outbound entry in NAT entry list. Create one if corresponding
 *   entry does not exist.
 *
 * Input Parameters:
 *   dev        - The device on which the packet will be sent.
 *   protocol   - The L4 protocol of the packet.
 *   local_ip   - The local ip of the packet.
 *   local_port - The local port of the packet.
 *   peer_ip    - The peer ip of the packet.
 *   peer_port  - The peer port of the packet.
 *   try_create - Try create the entry if no entry found.
 *
 * Returned Value:
 *   Pointer to entry on success; null on failure
 *
 ****************************************************************************/

FAR struct ipv4_nat_entry *
ipv4_nat_outbound_entry_find(FAR struct net_driver_s *dev, uint8_t protocol,
                             in_addr_t local_ip, uint16_t local_port,
                             in_addr_t peer_ip, uint16_t peer_port,
                             bool try_create)
{
  FAR hash_node_t *p;
  FAR hash_node_t *tmp;
  int32_t current_time = TICK2SEC(clock_systime_ticks());

#if CONFIG_NET_NAT_ENTRY_RECLAIM_SEC > 0
  ipv4_nat_reclaim_entry(current_time);
#endif

  hashtable_for_every_possible_safe(g_table_outbound, p, tmp,
                      ipv4_nat_outbound_key(local_ip, local_port, protocol))
    {
      FAR struct ipv4_nat_entry *entry =
        container_of(p, struct ipv4_nat_entry, hash_outbound);

      /* Remove expired entries. */

      if (entry->expire_time - current_time <= 0)
        {
          ipv4_nat_entry_delete(entry);
          continue;
        }

      if (entry->protocol == protocol &&
          net_ipv4addr_cmp(entry->external_ip, dev->d_ipaddr) &&
          net_ipv4addr_cmp(entry->local_ip, local_ip) &&
          entry->local_port == local_port
#ifdef CONFIG_NET_NAT_SYMMETRIC
          && net_ipv4addr_cmp(entry->peer_ip, peer_ip) &&
          entry->peer_port == peer_port
#endif
          )
        {
          ipv4_nat_entry_refresh(entry);
          return entry;
        }
    }

  if (!try_create)
    {
      return NULL;
    }

  /* Failed to find the entry, create one. */

  ninfo("INFO: Failed to find IPv4 outbound NAT entry for "
        "proto=%" PRIu8 ", local=%" PRIx32 ":%" PRIu16 ", try create one.\n",
        protocol, local_ip, local_port);

  uint16_t external_port = ipv4_nat_select_port(dev, protocol, local_port);
  if (!external_port)
    {
      nwarn("WARNING: Failed to find an available port!\n");
      return NULL;
    }

  return ipv4_nat_entry_create(protocol, dev->d_ipaddr, external_port,
                               local_ip, local_port, peer_ip, peer_port);
}

#endif /* CONFIG_NET_NAT && CONFIG_NET_IPv4 */