2019-08-19 17:16:08 +02:00
|
|
|
/****************************************************************************
|
|
|
|
* boards/arm/stm32/stm3220g-eval/include/board.h
|
2012-03-10 01:15:45 +01:00
|
|
|
*
|
2016-06-03 19:38:59 +02:00
|
|
|
* Copyright (C) 2012, 2016 Gregory Nutt. All rights reserved.
|
2012-03-10 01:15:45 +01:00
|
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
*
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in
|
|
|
|
* the documentation and/or other materials provided with the
|
|
|
|
* distribution.
|
|
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
|
|
* used to endorse or promote products derived from this software
|
|
|
|
* without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*
|
2019-08-19 17:16:08 +02:00
|
|
|
****************************************************************************/
|
2012-03-10 01:15:45 +01:00
|
|
|
|
2019-08-19 17:16:08 +02:00
|
|
|
#ifndef __BOARDS_ARM_STM32_STM3220G_EVAL_INCLUDE_BOARD_H
|
|
|
|
#define __BOARDS_ARM_STM32_STM3220G_EVAL_INCLUDE_BOARD_H
|
2012-03-10 01:15:45 +01:00
|
|
|
|
2019-08-19 17:16:08 +02:00
|
|
|
/****************************************************************************
|
2012-03-10 01:15:45 +01:00
|
|
|
* Included Files
|
2019-08-19 17:16:08 +02:00
|
|
|
****************************************************************************/
|
2012-03-10 01:15:45 +01:00
|
|
|
|
|
|
|
#include <nuttx/config.h>
|
2012-07-14 21:30:31 +02:00
|
|
|
|
2012-03-10 01:15:45 +01:00
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
# include <stdint.h>
|
|
|
|
#endif
|
2012-07-14 21:30:31 +02:00
|
|
|
|
2012-03-10 01:15:45 +01:00
|
|
|
#include "stm32_rcc.h"
|
|
|
|
#include "stm32_sdio.h"
|
2013-02-09 16:03:49 +01:00
|
|
|
#include "stm32.h"
|
2012-03-10 01:15:45 +01:00
|
|
|
|
2019-08-19 17:16:08 +02:00
|
|
|
/****************************************************************************
|
2015-04-08 17:15:17 +02:00
|
|
|
* Pre-processor Definitions
|
2019-08-19 17:16:08 +02:00
|
|
|
****************************************************************************/
|
2012-03-10 01:15:45 +01:00
|
|
|
|
|
|
|
/* Clocking *************************************************************************/
|
|
|
|
/* Four clock sources are available on STM3220G-EVAL evaluation board for
|
|
|
|
* STM32F207IGH6 and RTC embedded:
|
|
|
|
*
|
|
|
|
* X1, 25 MHz crystal for ethernet PHY with socket. It can be removed when clock is
|
|
|
|
* provided by MCO pin of the MCU
|
|
|
|
* X2, 26 MHz crystal for USB OTG HS PHY
|
|
|
|
* X3, 32 kHz crystal for embedded RTC
|
|
|
|
* X4, 25 MHz crystal with socket for STM32F207IGH6 microcontroller (It can be removed
|
|
|
|
* from socket when internal RC clock is used.)
|
|
|
|
*
|
|
|
|
* This is the "standard" configuration as set up by arch/arm/src/stm32f40xx_rcc.c:
|
|
|
|
* System Clock source : PLL (HSE)
|
2012-04-16 17:45:33 +02:00
|
|
|
* SYSCLK(Hz) : 120000000 Determined by PLL configuration
|
|
|
|
* HCLK(Hz) : 120000000 (STM32_RCC_CFGR_HPRE)
|
2012-03-10 01:15:45 +01:00
|
|
|
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
|
|
|
|
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
|
|
|
|
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
|
|
|
|
* HSE Frequency(Hz) : 25000000 (STM32_BOARD_XTAL)
|
|
|
|
* PLLM : 25 (STM32_PLLCFG_PLLM)
|
2012-04-16 17:45:33 +02:00
|
|
|
* PLLN : 240 (STM32_PLLCFG_PLLN)
|
2012-03-10 01:15:45 +01:00
|
|
|
* PLLP : 2 (STM32_PLLCFG_PLLP)
|
2012-08-15 19:58:54 +02:00
|
|
|
* PLLQ : 5 (STM32_PLLCFG_PLLQ)
|
2012-03-10 01:15:45 +01:00
|
|
|
* Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK
|
|
|
|
* Flash Latency(WS) : 5
|
|
|
|
* Prefetch Buffer : OFF
|
|
|
|
* Instruction cache : ON
|
|
|
|
* Data cache : ON
|
|
|
|
* Require 48MHz for USB OTG FS, : Enabled
|
|
|
|
* SDIO and RNG clock
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* HSI - 16 MHz RC factory-trimmed
|
|
|
|
* LSI - 32 KHz RC
|
|
|
|
* HSE - On-board crystal frequency is 25MHz
|
|
|
|
* LSE - 32.768 kHz
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define STM32_BOARD_XTAL 25000000ul
|
|
|
|
|
|
|
|
#define STM32_HSI_FREQUENCY 16000000ul
|
|
|
|
#define STM32_LSI_FREQUENCY 32000
|
|
|
|
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
|
|
|
#define STM32_LSE_FREQUENCY 32768
|
|
|
|
|
|
|
|
/* Main PLL Configuration.
|
|
|
|
*
|
|
|
|
* PLL source is HSE
|
|
|
|
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
2012-04-16 17:45:33 +02:00
|
|
|
* = (25,000,000 / 25) * 240
|
|
|
|
* = 240,000,000
|
2012-03-10 01:15:45 +01:00
|
|
|
* SYSCLK = PLL_VCO / PLLP
|
2012-04-16 17:45:33 +02:00
|
|
|
* = 240,000,000 / 2 = 120,000,000
|
2012-03-10 01:15:45 +01:00
|
|
|
* USB OTG FS, SDIO and RNG Clock
|
|
|
|
* = PLL_VCO / PLLQ
|
2012-04-16 17:45:33 +02:00
|
|
|
* = 240,000,000 / 5 = 48,000,000
|
2012-03-10 01:15:45 +01:00
|
|
|
* = 48,000,000
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(25)
|
2012-04-16 17:45:33 +02:00
|
|
|
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(240)
|
2012-03-10 01:15:45 +01:00
|
|
|
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
2012-08-15 19:58:54 +02:00
|
|
|
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(5)
|
2012-03-10 01:15:45 +01:00
|
|
|
|
2012-04-16 17:45:33 +02:00
|
|
|
#define STM32_SYSCLK_FREQUENCY 120000000ul
|
2012-03-10 01:15:45 +01:00
|
|
|
|
2012-04-16 17:45:33 +02:00
|
|
|
/* AHB clock (HCLK) is SYSCLK (120MHz) */
|
2012-03-10 01:15:45 +01:00
|
|
|
|
|
|
|
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
|
|
|
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
|
|
|
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
|
|
|
|
2012-04-16 17:45:33 +02:00
|
|
|
/* APB1 clock (PCLK1) is HCLK/4 (30MHz) */
|
2012-03-10 01:15:45 +01:00
|
|
|
|
|
|
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
|
|
|
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
|
|
|
|
|
2012-04-16 17:45:33 +02:00
|
|
|
/* Timers driven from APB1 will be twice PCLK1 (60Mhz)*/
|
2012-03-10 01:15:45 +01:00
|
|
|
|
|
|
|
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
|
|
|
|
2012-04-16 17:45:33 +02:00
|
|
|
/* APB2 clock (PCLK2) is HCLK/2 (60MHz) */
|
2012-03-10 01:15:45 +01:00
|
|
|
|
|
|
|
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
|
|
|
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
|
|
|
|
2012-04-16 17:45:33 +02:00
|
|
|
/* Timers driven from APB2 will be twice PCLK2 (120Mhz)*/
|
2012-03-10 01:15:45 +01:00
|
|
|
|
|
|
|
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
|
|
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
|
|
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
|
|
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
|
|
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
|
|
|
|
|
|
|
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
2012-04-16 17:45:33 +02:00
|
|
|
* otherwise frequency is 2xAPBx.
|
2012-03-10 01:15:45 +01:00
|
|
|
* Note: TIM1,8 are on APB2, others on APB1
|
|
|
|
*/
|
|
|
|
|
2016-06-03 19:38:59 +02:00
|
|
|
#define BOARD_TIM1_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
#define BOARD_TIM2_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
#define BOARD_TIM3_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
#define BOARD_TIM4_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
#define BOARD_TIM5_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
#define BOARD_TIM6_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
#define BOARD_TIM7_FREQUENCY STM32_HCLK_FREQUENCY
|
|
|
|
#define BOARD_TIM8_FREQUENCY STM32_HCLK_FREQUENCY
|
2012-03-10 01:15:45 +01:00
|
|
|
|
2012-04-16 17:45:33 +02:00
|
|
|
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
|
2012-03-10 01:15:45 +01:00
|
|
|
* in order to avoid RX overrun/TX underrun errors due to delayed responses
|
|
|
|
* to service FIFOs in interrupt driven mode. These values have not been
|
|
|
|
* tuned!!!
|
|
|
|
*
|
2012-07-14 21:30:31 +02:00
|
|
|
* SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(118+2)=400 KHz
|
2012-03-10 01:15:45 +01:00
|
|
|
*/
|
2012-04-16 17:45:33 +02:00
|
|
|
|
2012-07-14 21:30:31 +02:00
|
|
|
#define SDIO_INIT_CLKDIV (118 << SDIO_CLKCR_CLKDIV_SHIFT)
|
2012-03-10 01:15:45 +01:00
|
|
|
|
2012-07-14 21:30:31 +02:00
|
|
|
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
|
|
|
|
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
|
2012-03-10 01:15:45 +01:00
|
|
|
*/
|
|
|
|
|
|
|
|
#ifdef CONFIG_SDIO_DMA
|
2012-07-14 21:30:31 +02:00
|
|
|
# define SDIO_MMCXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
|
2012-03-10 01:15:45 +01:00
|
|
|
#else
|
2012-07-14 21:30:31 +02:00
|
|
|
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
|
2012-03-10 01:15:45 +01:00
|
|
|
#endif
|
|
|
|
|
2012-08-11 00:42:46 +02:00
|
|
|
/* DMA ON: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)= 16 MHz
|
2012-07-14 21:30:31 +02:00
|
|
|
* DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)= 12 MHz
|
2012-03-10 01:15:45 +01:00
|
|
|
*/
|
|
|
|
|
|
|
|
#ifdef CONFIG_SDIO_DMA
|
2012-08-11 00:42:46 +02:00
|
|
|
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
|
2012-03-10 01:15:45 +01:00
|
|
|
#else
|
2012-07-14 21:30:31 +02:00
|
|
|
# define SDIO_SDXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
|
2012-03-10 01:15:45 +01:00
|
|
|
#endif
|
|
|
|
|
|
|
|
/* Ethernet *************************************************************************/
|
|
|
|
/* We need to provide clocking to the MII PHY via MCO1 (PA8) */
|
|
|
|
|
|
|
|
#if defined(CONFIG_NET) && defined(CONFIG_STM32_ETHMAC)
|
|
|
|
|
|
|
|
# if !defined(CONFIG_STM32_MII)
|
|
|
|
# warning "CONFIG_STM32_MII required for Ethernet"
|
|
|
|
# elif !defined(CONFIG_STM32_MII_MCO1)
|
|
|
|
# warning "CONFIG_STM32_MII_MCO1 required for Ethernet MII"
|
|
|
|
# else
|
|
|
|
|
|
|
|
/* Output HSE clock (25MHz) on MCO1 pin (PA8) to clock the PHY */
|
|
|
|
|
|
|
|
# define BOARD_CFGR_MC01_SOURCE RCC_CFGR_MCO1_HSE
|
|
|
|
# define BOARD_CFGR_MC01_DIVIDER RCC_CFGR_MCO1PRE_NONE
|
|
|
|
|
|
|
|
# endif
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* LED definitions ******************************************************************/
|
|
|
|
/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any
|
|
|
|
* way. The following definitions are used to access individual LEDs.
|
|
|
|
*/
|
|
|
|
|
2015-11-01 17:53:34 +01:00
|
|
|
/* LED index values for use with board_userled() */
|
2012-03-10 01:15:45 +01:00
|
|
|
|
|
|
|
#define BOARD_LED1 0
|
|
|
|
#define BOARD_LED2 1
|
|
|
|
#define BOARD_LED3 2
|
|
|
|
#define BOARD_LED4 3
|
|
|
|
#define BOARD_NLEDS 4
|
|
|
|
|
2015-11-01 17:53:34 +01:00
|
|
|
/* LED bits for use with board_userled_all() */
|
2012-03-10 01:15:45 +01:00
|
|
|
|
|
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
|
|
|
#define BOARD_LED2_BIT (1 << BOARD_LED2)
|
|
|
|
#define BOARD_LED3_BIT (1 << BOARD_LED3)
|
|
|
|
#define BOARD_LED4_BIT (1 << BOARD_LED4)
|
|
|
|
|
|
|
|
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 4 LEDs on board the
|
|
|
|
* STM3220G-EVAL. The following definitions describe how NuttX controls the LEDs:
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define LED_STARTED 0 /* LED1 */
|
|
|
|
#define LED_HEAPALLOCATE 1 /* LED2 */
|
|
|
|
#define LED_IRQSENABLED 2 /* LED1 + LED2 */
|
|
|
|
#define LED_STACKCREATED 3 /* LED3 */
|
|
|
|
#define LED_INIRQ 4 /* LED1 + LED3 */
|
|
|
|
#define LED_SIGNAL 5 /* LED2 + LED3 */
|
|
|
|
#define LED_ASSERTION 6 /* LED1 + LED2 + LED3 */
|
|
|
|
#define LED_PANIC 7 /* N/C + N/C + N/C + LED4 */
|
|
|
|
|
|
|
|
/* Button definitions ***************************************************************/
|
|
|
|
/* The STM3220G-EVAL supports three buttons: */
|
|
|
|
|
|
|
|
#define BUTTON_WAKEUP 0
|
|
|
|
#define BUTTON_TAMPER 1
|
|
|
|
#define BUTTON_USER 2
|
|
|
|
|
|
|
|
#define NUM_BUTTONS 3
|
|
|
|
|
|
|
|
#define BUTTON_WAKEUP_BIT (1 << BUTTON_WAKEUP)
|
|
|
|
#define BUTTON_TAMPER_BIT (1 << BUTTON_TAMPER)
|
|
|
|
#define BUTTON_USER_BIT (1 << BUTTON_USER)
|
|
|
|
|
|
|
|
/* Alternate function pin selections ************************************************/
|
|
|
|
|
|
|
|
/* UART3:
|
|
|
|
*
|
|
|
|
* - PC11 is MicroSDCard_D3 & RS232/IrDA_RX (JP22 open)
|
|
|
|
* - PC10 is MicroSDCard_D2 & RSS232/IrDA_TX
|
|
|
|
*/
|
2012-07-12 18:11:43 +02:00
|
|
|
|
2012-04-16 17:45:33 +02:00
|
|
|
#ifdef CONFIG_STM32_USART3
|
|
|
|
# define GPIO_USART3_RX GPIO_USART3_RX_2
|
|
|
|
# define GPIO_USART3_TX GPIO_USART3_TX_2
|
|
|
|
#endif
|
2012-03-10 01:15:45 +01:00
|
|
|
|
|
|
|
/* Ethernet:
|
|
|
|
*
|
|
|
|
* - PA2 is ETH_MDIO
|
|
|
|
* - PC1 is ETH_MDC
|
|
|
|
* - PB5 is ETH_PPS_OUT
|
|
|
|
* - PH2 is ETH_MII_CRS
|
|
|
|
* - PH3 is ETH_MII_COL
|
|
|
|
* - PI10 is ETH_MII_RX_ER
|
|
|
|
* - PH6 is ETH_MII_RXD2
|
|
|
|
* - PH7 is ETH_MII_RXD3
|
|
|
|
* - PC3 is ETH_MII_TX_CLK
|
|
|
|
* - PC2 is ETH_MII_TXD2
|
|
|
|
* - PB8 is ETH_MII_TXD3
|
|
|
|
* - PA1 is ETH_MII_RX_CLK/ETH_RMII_REF_CLK
|
|
|
|
* - PA7 is ETH_MII_RX_DV/ETH_RMII_CRS_DV
|
|
|
|
* - PC4 is ETH_MII_RXD0/ETH_RMII_RXD0
|
|
|
|
* - PC5 is ETH_MII_RXD1/ETH_RMII_RXD1
|
|
|
|
* - PG11 is ETH_MII_TX_EN/ETH_RMII_TX_EN
|
|
|
|
* - PG13 is ETH_MII_TXD0/ETH_RMII_TXD0
|
|
|
|
* - PG14 is ETH_MII_TXD1/ETH_RMII_TXD1
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define GPIO_ETH_PPS_OUT GPIO_ETH_PPS_OUT_1
|
|
|
|
#define GPIO_ETH_MII_CRS GPIO_ETH_MII_CRS_2
|
|
|
|
#define GPIO_ETH_MII_COL GPIO_ETH_MII_COL_2
|
|
|
|
#define GPIO_ETH_MII_RX_ER GPIO_ETH_MII_RX_ER_2
|
|
|
|
#define GPIO_ETH_MII_RXD2 GPIO_ETH_MII_RXD2_2
|
|
|
|
#define GPIO_ETH_MII_RXD3 GPIO_ETH_MII_RXD3_2
|
|
|
|
#define GPIO_ETH_MII_TXD3 GPIO_ETH_MII_TXD3_1
|
|
|
|
#define GPIO_ETH_MII_TX_EN GPIO_ETH_MII_TX_EN_2
|
|
|
|
#define GPIO_ETH_MII_TXD0 GPIO_ETH_MII_TXD0_2
|
|
|
|
#define GPIO_ETH_MII_TXD1 GPIO_ETH_MII_TXD1_2
|
|
|
|
#define GPIO_ETH_RMII_TX_EN GPIO_ETH_RMII_TX_EN_2
|
|
|
|
#define GPIO_ETH_RMII_TXD0 GPIO_ETH_RMII_TXD0_2
|
|
|
|
#define GPIO_ETH_RMII_TXD1 GPIO_ETH_RMII_TXD1_2
|
|
|
|
|
|
|
|
/* PWM
|
|
|
|
*
|
|
|
|
* The STM3220G-Eval has no real on-board PWM devices, but the board can be
|
|
|
|
* configured to output a pulse train using the following:
|
|
|
|
*
|
|
|
|
* If FSMC is not used:
|
|
|
|
* TIM4 CH2OUT: PD13 FSMC_A18 / MC_TIM4_CH2OUT
|
|
|
|
* Daughterboard Extension Connector, CN3, pin 32
|
|
|
|
* Motor Control Connector CN15, pin 33 -- not available unless you bridge SB14.
|
|
|
|
*
|
|
|
|
* TIM1 CH1OUT: PE9 FSMC_D6
|
|
|
|
* Daughterboard Extension Connector, CN2, pin 24
|
|
|
|
*
|
|
|
|
* TIM1_CH2OUT: PE11 FSMC_D8
|
|
|
|
* Daughterboard Extension Connector, CN2, pin 26
|
|
|
|
*
|
|
|
|
* TIM1_CH3OUT: PE13 FSMC_D10
|
|
|
|
* Daughterboard Extension Connector, CN2, pin 28
|
|
|
|
*
|
|
|
|
* TIM1_CH4OUT: PE14 FSMC_D11
|
|
|
|
* Daughterboard Extension Connector, CN2, pin 29
|
|
|
|
*
|
|
|
|
* If OTG FS is not used
|
|
|
|
*
|
|
|
|
* TIM1_CH3OUT: PA10 OTG_FS_ID
|
|
|
|
* Daughterboard Extension Connector, CN3, pin 14
|
|
|
|
*
|
|
|
|
* TIM1_CH4OUT: PA11 OTG_FS_DM
|
|
|
|
* Daughterboard Extension Connector, CN3, pin 11
|
|
|
|
*
|
|
|
|
* If DMCI is not used
|
|
|
|
*
|
|
|
|
* TIM8 CH1OUT: PI5 DCMI_VSYNC & MC
|
|
|
|
* Daughterboard Extension Connector, CN4, pin 4
|
|
|
|
*
|
|
|
|
* TIM8_CH2OUT: PI6 DCMI_D6 & MC
|
|
|
|
* Daughterboard Extension Connector, CN4, pin 3
|
|
|
|
*
|
|
|
|
* TIM8_CH3OUT: PI7 DCMI_D7 & MC
|
|
|
|
* Daughterboard Extension Connector, CN4, pin 2
|
|
|
|
*
|
|
|
|
* If SDIO is not used
|
|
|
|
*
|
|
|
|
* TIM8_CH3OUT: PC8 MicroSDCard_D0 & MC
|
|
|
|
* Daughterboard Extension Connector, CN3, pin 18
|
|
|
|
*
|
|
|
|
* TIM8_CH4OUT: PC9 MicroSDCard_D1 & I2S_CKIN (Need JP16 open)
|
|
|
|
* Daughterboard Extension Connector, CN3, pin 17
|
|
|
|
*
|
|
|
|
* Others
|
|
|
|
*
|
|
|
|
* TIM8 CH1OUT: PC6 I2S_MCK & Smartcard_IO (JP21 open)
|
|
|
|
*/
|
|
|
|
|
|
|
|
#if !defined(CONFIG_STM32_FSMC)
|
|
|
|
# define GPIO_TIM4_CH2OUT GPIO_TIM4_CH2OUT_2
|
|
|
|
# define GPIO_TIM1_CH1OUT GPIO_TIM1_CH1OUT_2
|
|
|
|
# define GPIO_TIM1_CH2OUT GPIO_TIM1_CH2OUT_2
|
|
|
|
# define GPIO_TIM1_CH3OUT GPIO_TIM1_CH3OUT_2
|
|
|
|
# define GPIO_TIM1_CH4OUT GPIO_TIM1_CH4OUT_2
|
|
|
|
#elif !defined(CONFIG_STM32_OTGFS)
|
|
|
|
# define GPIO_TIM1_CH3OUT GPIO_TIM1_CH3OUT_1
|
|
|
|
# define GPIO_TIM1_CH4OUT GPIO_TIM1_CH4OUT_1
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#if !defined(CONFIG_STM32_DCMI)
|
|
|
|
# define GPIO_TIM8_CH1OUT GPIO_TIM8_CH1OUT_2
|
|
|
|
# define GPIO_TIM8_CH2OUT GPIO_TIM8_CH2OUT_2
|
|
|
|
# define GPIO_TIM8_CH3OUT GPIO_TIM8_CH3OUT_2
|
|
|
|
#else
|
|
|
|
# define GPIO_TIM8_CH1OUT GPIO_TIM8_CH1OUT_1
|
|
|
|
# if !defined(CONFIG_STM32_SDIO)
|
|
|
|
# define GPIO_TIM8_CH3OUT GPIO_TIM8_CH3OUT_1
|
|
|
|
# endif
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#if !defined(CONFIG_STM32_SDIO)
|
|
|
|
# define GPIO_TIM8_CH4OUT GPIO_TIM8_CH4OUT_1
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* CAN
|
|
|
|
*
|
|
|
|
* Connector 10 (CN10) is DB-9 male connector that can be used with CAN1 or CAN2.
|
|
|
|
*
|
|
|
|
* JP10 connects CAN1_RX or CAN2_RX to the CAN transceiver
|
|
|
|
* JP3 connects CAN1_TX or CAN2_TX to the CAN transceiver
|
|
|
|
*
|
|
|
|
* CAN signals are then available on CN10 pins:
|
|
|
|
*
|
|
|
|
* CN10 Pin 7 = CANH
|
|
|
|
* CN10 Pin 2 = CANL
|
|
|
|
*
|
|
|
|
* Mapping to STM32 GPIO pins:
|
|
|
|
*
|
2012-04-16 17:45:33 +02:00
|
|
|
* PD0 = FSMC_D2 & CAN1_RX
|
|
|
|
* PD1 = FSMC_D3 & CAN1_TX
|
2012-03-10 01:15:45 +01:00
|
|
|
* PB13 = ULPI_D6 & CAN2_TX
|
|
|
|
* PB5 = ULPI_D7 & CAN2_RX
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define GPIO_CAN1_RX GPIO_CAN1_RX_3
|
|
|
|
#define GPIO_CAN1_TX GPIO_CAN1_TX_3
|
|
|
|
|
|
|
|
#define GPIO_CAN2_RX GPIO_CAN2_RX_2
|
|
|
|
#define GPIO_CAN2_TX GPIO_CAN2_TX_1
|
|
|
|
|
|
|
|
/* I2C. Only I2C1 is available on the STM3220G-EVAL. I2C1_SCL and I2C1_SDA are
|
|
|
|
* available on the following pins:
|
|
|
|
*
|
|
|
|
* - PB6 is I2C1_SCL
|
|
|
|
* - PB9 is I2C1_SDA
|
|
|
|
*/
|
2012-04-16 17:45:33 +02:00
|
|
|
|
2012-03-10 01:15:45 +01:00
|
|
|
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1
|
|
|
|
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2
|
|
|
|
|
2012-07-12 18:11:43 +02:00
|
|
|
/* DMA Channl/Stream Selections *****************************************************/
|
|
|
|
/* Stream selections are arbitrary for now but might become important in the future
|
|
|
|
* is we set aside more DMA channels/streams.
|
|
|
|
*
|
|
|
|
* SDIO DMA
|
|
|
|
* DMAMAP_SDIO_1 = Channel 4, Stream 3
|
|
|
|
* DMAMAP_SDIO_2 = Channel 4, Stream 6
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define DMAMAP_SDIO DMAMAP_SDIO_1
|
|
|
|
|
2019-08-19 17:16:08 +02:00
|
|
|
/****************************************************************************
|
2012-03-10 01:15:45 +01:00
|
|
|
* Public Data
|
2019-08-19 17:16:08 +02:00
|
|
|
****************************************************************************/
|
2012-03-10 01:15:45 +01:00
|
|
|
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
|
|
|
|
#undef EXTERN
|
|
|
|
#if defined(__cplusplus)
|
|
|
|
#define EXTERN extern "C"
|
2015-11-01 17:53:34 +01:00
|
|
|
extern "C"
|
|
|
|
{
|
2012-03-10 01:15:45 +01:00
|
|
|
#else
|
|
|
|
#define EXTERN extern
|
|
|
|
#endif
|
|
|
|
|
2019-08-19 17:16:08 +02:00
|
|
|
/****************************************************************************
|
2012-03-10 01:15:45 +01:00
|
|
|
* Public Function Prototypes
|
2019-08-19 17:16:08 +02:00
|
|
|
****************************************************************************/
|
2012-03-10 01:15:45 +01:00
|
|
|
|
2019-08-19 17:16:08 +02:00
|
|
|
/****************************************************************************
|
2012-05-29 00:17:36 +02:00
|
|
|
* Name: stm3220g_lcdclear
|
|
|
|
*
|
|
|
|
* Description:
|
|
|
|
* This is a non-standard LCD interface just for the STM3210E-EVAL board. Because
|
|
|
|
* of the various rotations, clearing the display in the normal way by writing a
|
|
|
|
* sequences of runs that covers the entire display can be very slow. Here the
|
|
|
|
* dispaly is cleared by simply setting all GRAM memory to the specified color.
|
|
|
|
*
|
2019-08-19 17:16:08 +02:00
|
|
|
****************************************************************************/
|
2012-05-29 00:17:36 +02:00
|
|
|
|
|
|
|
#ifdef CONFIG_STM32_FSMC
|
2015-11-01 17:53:34 +01:00
|
|
|
void stm3220g_lcdclear(uint16_t color);
|
2012-05-29 00:17:36 +02:00
|
|
|
#endif
|
|
|
|
|
2012-03-10 01:15:45 +01:00
|
|
|
#undef EXTERN
|
|
|
|
#if defined(__cplusplus)
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#endif /* __ASSEMBLY__ */
|
2020-01-31 19:07:39 +01:00
|
|
|
#endif /* __BOARDS_ARM_STM32_STM3220G_EVAL_INCLUDE_BOARD_H */
|