sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
88a41862b5
nuttx/configs/nucleo-f4x1re/include/nucleo-f411re.h

229 lines
8.5 KiB
C
Raw Normal View History

Extend the Nucleo-F401RE configuration to also support the Nucleo-F411RE. From Serg Podtynnyi
2014-10-15 01:32:13 +02:00
/************************************************************************************
Rename configs/nucleo-f401re to configs/nucleo-f4x1re
2014-10-15 15:05:08 +02:00
* configs/nucleo-f4x1re/include/nucleo-f411re.h
Extend the Nucleo-F401RE configuration to also support the Nucleo-F411RE. From Serg Podtynnyi
2014-10-15 01:32:13 +02:00
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_NUCLEO_F401RE_INCLUDE_NUCLEO_F411RE_H
#define __CONFIGS_NUCLEO_F401RE_INCLUDE_NUCLEO_F411RE_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* The NUCLEOF411RE supports both HSE and LSE crystals (X2 and X3). However, as
* shipped, the X2 and X3 crystals are not populated. Therefore the Nucleo-FF411RE
* will need to run off the 16MHz HSI clock.
*
* System Clock source : PLL (HSI)
* SYSCLK(Hz) : 104000000 Determined by PLL configuration
* HCLK(Hz) : 104000000 (STM32_RCC_CFGR_HPRE)
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
* APB1 Prescaler : 2 (STM32_RCC_CFGR_PPRE1)
* APB2 Prescaler : 1 (STM32_RCC_CFGR_PPRE2)
* HSI Frequency(Hz) : 16000000 (nominal)
* PLLM : 8 (STM32_PLLCFG_PLLM)
* PLLN : 216 (STM32_PLLCFG_PLLN)
* PLLP : 4 (STM32_PLLCFG_PLLP)
* PLLQ : 9 (STM32_PLLCFG_PPQ)
* Flash Latency(WS) : 4
* Prefetch Buffer : OFF
* Instruction cache : ON
* Data cache : ON
* Require 48MHz for USB OTG FS, : Enabled
* SDIO and RNG clock
*/
/* HSI - 16 MHz RC factory-trimmed
* LSI - 32 KHz RC
* HSE - not installed
* LSE - not installed
*/
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_BOARD_USEHSI 1
/* Main PLL Configuration.
*
* Formulae:
*
* VCO input frequency = PLL input clock frequency / PLLM, 2 <= PLLM <= 63
* VCO output frequency = VCO input frequency × PLLN, 192 <= PLLN <= 432
* PLL output clock frequency = VCO frequency / PLLP, PLLP = 2, 4, 6, or 8
* USB OTG FS clock frequency = VCO frequency / PLLQ, 2 <= PLLQ <= 15
*
* There is no config for 100 MHz and 48 MHz for usb,
* so we would like to have SYSYCLK=104MHz and we must have the USB clock= 48MHz.
*
* PLLQ = 13 PLLP = 6 PLLN=390 PLLM=10
*
* We will configure like this
*
* PLL source is HSI
* PLL_VCO = (STM32_HSI_FREQUENCY / PLLM) * PLLN
* = (16,000,000 / 10) * 390
* = 624,000,000
* SYSCLK = PLL_VCO / PLLP
* = 624,000,000 / 6 = 104,000,000
* USB OTG FS and SDIO Clock
* = PLL_VCO / PLLQ
* = 624,000,000 / 13 = 48,000,000
*
* REVISIT: Trimming of the HSI is not yet supported.
*/
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(10)
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(390)
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_6
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(13)
#define STM32_SYSCLK_FREQUENCY 104000000ul
/* AHB clock (HCLK) is SYSCLK (104MHz) */
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* Same as above, to satisfy compiler */
/* APB1 clock (PCLK1) is HCLK/2 (52MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2 /* PCLK1 = HCLK / 2 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* Timers driven from APB1 will be twice PCLK1 */
/* REVISIT */
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* APB2 clock (PCLK2) is HCLK (104MHz) */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK / 1 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/1)
/* Timers driven from APB2 will be twice PCLK2 */
/* REVISIT */
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
* otherwise frequency is 2xAPBx.
* Note: TIM1,8 are on APB2, others on APB1
*/
/* REVISIT */
#define STM32_TIM18_FREQUENCY (2*STM32_PCLK2_FREQUENCY)
#define STM32_TIM27_FREQUENCY (2*STM32_PCLK1_FREQUENCY)
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
* in order to avoid RX overrun/TX underrun errors due to delayed responses
* to service FIFOs in interrupt driven mode. These values have not been
* tuned!!!
*
* HCLK=72MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(178+2)=400 KHz
*/
/* REVISIT */
#define SDIO_INIT_CLKDIV (178 << SDIO_CLKCR_CLKDIV_SHIFT)
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(2+2)=18 MHz
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
*/
/* REVISIT */
#ifdef CONFIG_SDIO_DMA
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
#else
# define SDIO_MMCXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
#endif
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(1+2)=24 MHz
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
*/
/* REVISIT */
#ifdef CONFIG_SDIO_DMA
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
#else
# define SDIO_SDXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
#endif
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_NUCLEO_F401RE_INCLUDE_NUCLEO_F411RE_H */
Reference in New Issue Copy Permalink