nuttx/configs/stm32f429i-disco/include/board.h

/************************************************************************************
 * configs/stm32f429i-disco/include/board.h
 * include/arch/board/board.h
 *
 *   Copyright (C) 2012, 2015 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ************************************************************************************/

#ifndef __CONFIG_STM32F429I_DISCO_INCLUDE_BOARD_H
#define __CONFIG_STM32F429I_DISCO_INCLUDE_BOARD_H

/************************************************************************************
 * Included Files
 ************************************************************************************/

#include <nuttx/config.h>

#ifndef __ASSEMBLY__
# include <stdint.h>
#endif

#include "stm32_rcc.h"
#include "stm32_sdio.h"
#include "stm32.h"

/************************************************************************************
 * Pre-processor Definitions
 ************************************************************************************/

/* Clocking *************************************************************************/
/* The STM32F4 Discovery board features a single 8MHz crystal.  Space is provided
 * for a 32kHz RTC backup crystal, but it is not stuffed.
 *
 * This is the canonical configuration:
 *   System Clock source           : PLL (HSE)
 *   SYSCLK(Hz)                    : 180000000    Determined by PLL configuration
 *   HCLK(Hz)                      : 180000000    (STM32_RCC_CFGR_HPRE)
 *   AHB Prescaler                 : 1            (STM32_RCC_CFGR_HPRE)
 *   APB1 Prescaler                : 4            (STM32_RCC_CFGR_PPRE1)
 *   APB2 Prescaler                : 2            (STM32_RCC_CFGR_PPRE2)
 *   HSE Frequency(Hz)             : 8000000      (STM32_BOARD_XTAL)
 *   PLLM                          : 8            (STM32_PLLCFG_PLLM)
 *   PLLN                          : 336          (STM32_PLLCFG_PLLN)
 *   PLLP                          : 2            (STM32_PLLCFG_PLLP)
 *   PLLQ                          : 7            (STM32_PLLCFG_PLLQ)
 *   Main regulator output voltage : Scale1 mode  Needed for high speed SYSCLK
 *   Flash Latency(WS)             : 5
 *   Prefetch Buffer               : OFF
 *   Instruction cache             : ON
 *   Data cache                    : ON
 *   Require 48MHz for USB OTG FS, : Enabled
 *   SDIO and RNG clock
 */

/* HSI - 16 MHz RC factory-trimmed
 * LSI - 32 KHz RC
 * HSE - On-board crystal frequency is 8MHz
 * LSE - 32.768 kHz
 */

#define STM32_BOARD_XTAL        8000000ul

#define STM32_HSI_FREQUENCY     16000000ul
#define STM32_LSI_FREQUENCY     32000
#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY     32768

/* Main PLL Configuration.
 *
 * PLL source is HSE
 * PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
 *         = (8,000,000 / 8) * 336
 *         = 336,000,000
 * SYSCLK  = PLL_VCO / PLLP
 *         = 336,000,000 / 2 = 168,000,000
 * USB OTG FS, SDIO and RNG Clock
 *         =  PLL_VCO / PLLQ
 *         = 48,000,000
 */

#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(336)
#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_2
#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(7)

#define STM32_SYSCLK_FREQUENCY  168000000ul

/* AHB clock (HCLK) is SYSCLK (168MHz) */

#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK  /* HCLK  = SYSCLK / 1 */
#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY  /* same as above, to satisfy compiler */

/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */

#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd4     /* PCLK1 = HCLK / 4 */
#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/4)

/* Timers driven from APB1 will be twice PCLK1 */

#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)

/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */

#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLKd2     /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY/2)

/* Timers driven from APB2 will be twice PCLK2 */

#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM9_CLKIN   (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM10_CLKIN  (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM11_CLKIN  (2*STM32_PCLK2_FREQUENCY)

/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
 * otherwise frequency is 2xAPBx.
 * Note: TIM1,8 are on APB2, others on APB1
 */

#define STM32_TIM18_FREQUENCY   STM32_HCLK_FREQUENCY
#define STM32_TIM27_FREQUENCY   (STM32_HCLK_FREQUENCY/2)

/* LED definitions ******************************************************************/
/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any
 * way.  The following definitions are used to access individual LEDs.
 */

/* LED index values for use with board_userled() */

#define BOARD_LED1        0
#define BOARD_LED2        1
#define BOARD_NLEDS       2

#define BOARD_LED_GREEN   BOARD_LED1
#define BOARD_LED_ORANGE  BOARD_LED2

/* LED bits for use with board_userled_all() */

#define BOARD_LED1_BIT    (1 << BOARD_LED1)
#define BOARD_LED2_BIT    (1 << BOARD_LED2)

/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 4 LEDs on board the
 * stm32f429i-disco.  The following definitions describe how NuttX controls the LEDs:
 */

#define LED_STARTED       0  /* LED1 */
#define LED_HEAPALLOCATE  1  /* LED2 */
#define LED_IRQSENABLED   2  /* LED1 + LED2 */
#define LED_STACKCREATED  3  /* LED3 */
#define LED_INIRQ         4  /* LED1 + LED3 */
#define LED_SIGNAL        5  /* LED2 + LED3 */
#define LED_ASSERTION     6  /* LED1 + LED2 + LED3 */
#define LED_PANIC         7  /* N/C  + N/C  + N/C + LED4 */

/* Button definitions ***************************************************************/
/* The STM32F4 Discovery supports one button: */

#define BUTTON_USER        0

#define NUM_BUTTONS        1

#define BUTTON_USER_BIT    (1 << BUTTON_USER)

/* Alternate function pin selections ************************************************/

/* UART2:
 *
 * The STM32F4 Discovery has no on-board serial devices, but the console is
 * brought out to PA2 (TX) and PA3 (RX) for connection to an external serial device.
 * (See the README.txt file for other options)
 */

#define GPIO_USART1_RX GPIO_USART1_RX_1
#define GPIO_USART1_TX GPIO_USART1_TX_1

/* PWM
 *
 * The STM32F4 Discovery has no real on-board PWM devices, but the board can be
 * configured to output a pulse train using TIM4 CH2 on PD13.
 */

#define GPIO_TIM4_CH2OUT GPIO_TIM4_CH2OUT_2

/* SPI - There is a MEMS device on SPI5 using these pins: */

#define GPIO_SPI5_MISO GPIO_SPI5_MISO_1
#define GPIO_SPI5_MOSI GPIO_SPI5_MOSI_1
#define GPIO_SPI5_SCK  GPIO_SPI5_SCK_1

/* SPI - External SPI flash may be connected on SPI4: */

#define GPIO_SPI4_MISO GPIO_SPI4_MISO_1
#define GPIO_SPI4_MOSI GPIO_SPI4_MOSI_1
#define GPIO_SPI4_SCK  GPIO_SPI4_SCK_1

/* FSMC - SDRAM */

#define GPIO_FSMC_SDCKE1 GPIO_FSMC_SDCKE1_1
#define GPIO_FSMC_SDNE1  GPIO_FSMC_SDNE1_1
#define GPIO_FSMC_SDNWE  GPIO_FSMC_SDNWE_1

/* Timer Inputs/Outputs (see the README.txt file for options) */

#define GPIO_TIM2_CH1IN  GPIO_TIM2_CH1IN_2
#define GPIO_TIM2_CH2IN  GPIO_TIM2_CH2IN_1

#define GPIO_TIM8_CH1IN  GPIO_TIM8_CH1IN_1
#define GPIO_TIM8_CH2IN  GPIO_TIM8_CH2IN_1

#ifdef CONFIG_STM32_LTDC
# ifdef CONFIG_STM32F429I_DISCO_ILI9341_FBIFACE

/* LCD
 *
 * The STM32F429I-DISCO board contains an onboard TFT LCD connected to the
 * LTDC interface of the uC.  The LCD is 240x320 pixels. Define the parameters
 * of the LCD and the interface here.
 */

/* Panel configuration
 *
 * LCD Panel is Saef Technology Limited (SF-TC240T-9229A2-T) with integrated
 * Ilitek ILI9341 LCD Single Chip Driver (240RGBx320)
 *
 * PLLSAI settings
 * PLLSAIN                : 192
 * PLLSAIR                : 4
 * PLLSAIQ                : 7
 * PLLSAIDIVR             : 8
 *
 * Timings
 * Horicontal Front Porch : 10  (STM32_LTDC_HFP)
 * Horicontal Back Porch  : 20  (STM32_LTDC_HBP)
 * Vertical Front Porch   :  4  (STM32_LTDC_VFP)
 * Vertical Back Porch    :  2  (STM32_LTDC_VBP)
 *
 * Horicontal Sync        : 10  (STM32_LTDC_HSYNC)
 * Vertical Sync          :  4  (STM32_LTDC_VSYNC)
 *
 * Active Width           : 240 (STM32_LTDC_ACTIVEW)
 * Active Height          : 320 (STM32_LTDC_ACTIVEH)
 */

/* LTDC PLL configuration
 *
 * PLLSAI_VCO = STM32_HSE_FREQUENCY / PLLM
 *            = 8000000ul / 8
 *            = 1,000,000
 *
 * PLL LCD clock output
 *            = PLLSAI_VCO * PLLSAIN / PLLSAIR / PLLSAIDIVR
 *            = 1,000,000 * 192 / 4 /8
 *            = 6,000,000
 */

/* Defined panel settings */

#if defined(CONFIG_STM32F429I_DISCO_ILI9341_FBIFACE_LANDSCAPE) || \
    defined(CONFIG_STM32F429I_DISCO_ILI9341_FBIFACE_RLANDSCAPE)
# define BOARD_LTDC_WIDTH               320
# define BOARD_LTDC_HEIGHT              240
#else
# define BOARD_LTDC_WIDTH               240
# define BOARD_LTDC_HEIGHT              320
#endif

#define BOARD_LTDC_OUTPUT_BPP           16
#define BOARD_LTDC_HFP                  10
#define BOARD_LTDC_HBP                  20
#define BOARD_LTDC_VFP                  4
#define BOARD_LTDC_VBP                  2
#define BOARD_LTDC_HSYNC                10
#define BOARD_LTDC_VSYNC                2

#define BOARD_LTDC_PLLSAIN              192
#define BOARD_LTDC_PLLSAIR              4
#define BOARD_LTDC_PLLSAIQ              7

/* Division factor for LCD clock */

#define STM32_RCC_DCKCFGR_PLLSAIDIVR    RCC_DCKCFGR_PLLSAIDIVR_DIV8

/* Pixel Clock Polarity */
#define BOARD_LTDC_GCR_PCPOL            0 /* !LTDC_GCR_PCPOL */
/* Data Enable Polarity */
#define BOARD_LTDC_GCR_DEPOL            0 /* !LTDC_GCR_DEPOL */
/* Vertical Sync Polarity */
#define BOARD_LTDC_GCR_VSPOL            0 /* !LTDC_GCR_VSPOL */
/* Horicontal Sync Polarity */
#define BOARD_LTDC_GCR_HSPOL            0 /* !LTDC_GCR_HSPOL */

/* GPIO pinset */

#define GPIO_LTDC_PINS                  18 /* 18-bit display */

#define GPIO_LTDC_R2                    GPIO_LTDC_R2_1
#define GPIO_LTDC_R3                    GPIO_LTDC_R3_1
#define GPIO_LTDC_R4                    GPIO_LTDC_R4_1
#define GPIO_LTDC_R5                    GPIO_LTDC_R5_1
#define GPIO_LTDC_R6                    GPIO_LTDC_R6_1
#define GPIO_LTDC_R7                    GPIO_LTDC_R7_1

#define GPIO_LTDC_G2                    GPIO_LTDC_G2_1
#define GPIO_LTDC_G3                    GPIO_LTDC_G3_1
#define GPIO_LTDC_G4                    GPIO_LTDC_G4_1
#define GPIO_LTDC_G5                    GPIO_LTDC_G5_1
#define GPIO_LTDC_G6                    GPIO_LTDC_G6_1
#define GPIO_LTDC_G7                    GPIO_LTDC_G7_1

#define GPIO_LTDC_B2                    GPIO_LTDC_B2_1
#define GPIO_LTDC_B3                    GPIO_LTDC_B3_1
#define GPIO_LTDC_B4                    GPIO_LTDC_B4_1
#define GPIO_LTDC_B5                    GPIO_LTDC_B5_1
#define GPIO_LTDC_B6                    GPIO_LTDC_B6_1
#define GPIO_LTDC_B7                    GPIO_LTDC_B7_1

#define GPIO_LTDC_VSYNC                 GPIO_LTDC_VSYNC_1
#define GPIO_LTDC_HSYNC                 GPIO_LTDC_HSYNC_1
#define GPIO_LTDC_DE                    GPIO_LTDC_DE_1
#define GPIO_LTDC_CLK                   GPIO_LTDC_CLK_1

#else
/* Custom LCD display configuration */

# define BOARD_LTDC_WIDTH               ???
# define BOARD_LTDC_HEIGHT              ???

#define BOARD_LTDC_HFP                  ???
#define BOARD_LTDC_HBP                  ???
#define BOARD_LTDC_VFP                  ???
#define BOARD_LTDC_VBP                  ???
#define BOARD_LTDC_HSYNC                ???
#define BOARD_LTDC_VSYNC                ???

#define BOARD_LTDC_PLLSAIN              ???
#define BOARD_LTDC_PLLSAIR              ???
#define BOARD_LTDC_PLLSAIQ              ???

/* Division factor for LCD clock */

#define STM32_RCC_DCKCFGR_PLLSAIDIVR    ???

/* Pixel Clock Polarity */
#define BOARD_LTDC_GCR_PCPOL            ???
/* Data Enable Polarity */
#define BOARD_LTDC_GCR_DEPOL            ???
/* Vertical Sync Polarity */
#define BOARD_LTDC_GCR_VSPOL            ???
/* Horicontal Sync Polarity */
#define BOARD_LTDC_GCR_HSPOL            ???

/* GPIO pinset */

#define GPIO_LTDC_PINS                  ???

#define GPIO_LTDC_R2                    ???
#define GPIO_LTDC_R3                    ???
#define GPIO_LTDC_R4                    ???
#define GPIO_LTDC_R5                    ???
#define GPIO_LTDC_R6                    ???
#define GPIO_LTDC_R7                    ???

#define GPIO_LTDC_G2                    ???
#define GPIO_LTDC_G3                    ???
#define GPIO_LTDC_G4                    ???
#define GPIO_LTDC_G5                    ???
#define GPIO_LTDC_G6                    ???
#define GPIO_LTDC_G7                    ???

#define GPIO_LTDC_B2                    ???
#define GPIO_LTDC_B3                    ???
#define GPIO_LTDC_B4                    ???
#define GPIO_LTDC_B5                    ???
#define GPIO_LTDC_B6                    ???
#define GPIO_LTDC_B7                    ???

#define GPIO_LTDC_VSYNC                 ???
#define GPIO_LTDC_HSYNC                 ???
#define GPIO_LTDC_DE                    ???
#define GPIO_LTDC_CLK                   ???

#endif /* Custom LCD display */

/* Configure PLLSAI */

#define STM32_RCC_PLLSAICFGR_PLLSAIN    RCC_PLLSAICFGR_PLLSAIN(BOARD_LTDC_PLLSAIN)
#define STM32_RCC_PLLSAICFGR_PLLSAIR    RCC_PLLSAICFGR_PLLSAIR(BOARD_LTDC_PLLSAIR)
#define STM32_RCC_PLLSAICFGR_PLLSAIQ    RCC_PLLSAICFGR_PLLSAIQ(BOARD_LTDC_PLLSAIQ)

#endif /* CONFIG_STM32_LTDC */

/************************************************************************************
 * Public Data
 ************************************************************************************/
#ifndef __ASSEMBLY__

#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif

/************************************************************************************
 * Public Function Prototypes
 ************************************************************************************/

/************************************************************************************
 * Name: stm32_boardinitialize
 *
 * Description:
 *   All STM32 architectures must provide the following entry point.  This entry point
 *   is called early in the intitialization -- after all memory has been configured
 *   and mapped but before any devices have been initialized.
 *
 ************************************************************************************/

void stm32_boardinitialize(void);

#undef EXTERN
#if defined(__cplusplus)
}
#endif

#endif /* __ASSEMBLY__ */
#endif  /* __CONFIG_STM32F429I_DISCO_INCLUDE_BOARD_H */