nuttx/boards/arm/cxd56xx/spresense/include/board_pinconfig.h

107 lines
4.9 KiB
C
Raw Normal View History

/****************************************************************************
* boards/arm/cxd56xx/spresense/include/board_pinconfig.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __BOARDS_ARM_CXD56XX_SPRESENSE_INCLUDE_BOARD_PINCONFIG_H
#define __BOARDS_ARM_CXD56XX_SPRESENSE_INCLUDE_BOARD_PINCONFIG_H
/****************************************************************************
* Included Files
****************************************************************************/
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Customize from default to the board specific pin configuration
* The default pin configurations are defined in
* boards/arm/cxd56xx/spresense/include/board_pinconfig.h.
*
* Mode: shared pin function mode
* ENZI: 1=Input Enable, 0=Input Disable
* 4mA : Drive Current 1=4mA, 0=2mA
* Pull: 0=HiZ floating, PINCONF_PULLUP, PINCONF_PULLDOWN
*
* M E P
* P o N 4 u
* i d Z m l
* n e I A l
*/
#undef PINCONF_UART2_TXD
#undef PINCONF_UART2_RXD
#undef PINCONF_UART2_CTS
#undef PINCONF_UART2_RTS
#define PINCONF_UART2_TXD PINCONF(PIN_UART2_TXD, 1, 0, 1, 0)
#define PINCONF_UART2_RXD PINCONF(PIN_UART2_RXD, 1, 1, 1, 0)
#define PINCONF_UART2_CTS PINCONF(PIN_UART2_CTS, 1, 1, 1, PINCONF_PULLDOWN)
#define PINCONF_UART2_RTS PINCONF(PIN_UART2_RTS, 1, 0, 1, 0)
#undef PINCONF_SPI4_CS_X
#undef PINCONF_SPI4_SCK
#undef PINCONF_SPI4_MOSI
#define PINCONF_SPI4_CS_X PINCONF(PIN_SPI4_CS_X, 1, 0, 1, 0)
#define PINCONF_SPI4_SCK PINCONF(PIN_SPI4_SCK, 1, 0, 1, 0)
#define PINCONF_SPI4_MOSI PINCONF(PIN_SPI4_MOSI, 1, 0, 1, 0)
#undef PINCONF_SPI3_CS0_X
#undef PINCONF_SPI3_CS1_X
#undef PINCONF_SPI3_CS2_X
#undef PINCONF_SPI3_SCK
#undef PINCONF_SPI3_MOSI
#undef PINCONF_SPI3_MISO
#define PINCONF_SPI3_CS0_X PINCONF(PIN_SPI3_CS0_X, 1, 0, 1, 0)
#define PINCONF_SPI3_CS1_X PINCONF(PIN_SPI3_CS1_X, 1, 0, 1, 0)
#define PINCONF_SPI3_CS2_X PINCONF(PIN_SPI3_CS2_X, 1, 0, 1, 0)
#define PINCONF_SPI3_SCK PINCONF(PIN_SPI3_SCK, 1, 0, 1, 0)
#define PINCONF_SPI3_MOSI PINCONF(PIN_SPI3_MOSI, 1, 0, 1, 0)
#define PINCONF_SPI3_MISO PINCONF(PIN_SPI3_MISO, 1, 1, 1, 0)
#undef PINCONF_PWM0
#undef PINCONF_PWM1
#undef PINCONF_PWM2
#undef PINCONF_PWM3
#define PINCONF_PWM0 PINCONF(PIN_PWM0, 1, 0, 1, 0)
#define PINCONF_PWM1 PINCONF(PIN_PWM1, 1, 0, 1, 0)
#define PINCONF_PWM2 PINCONF(PIN_PWM2, 1, 0, 1, 0)
#define PINCONF_PWM3 PINCONF(PIN_PWM3, 1, 0, 1, 0)
#undef PINCONF_I2C0_BCK
#undef PINCONF_I2C0_BDT
#define PINCONF_I2C0_BCK PINCONF(PIN_I2C0_BCK, 1, 1, 1, 0)
#define PINCONF_I2C0_BDT PINCONF(PIN_I2C0_BDT, 1, 1, 1, 0)
#undef PINCONF_SDIO_CLK_GPIO
#undef PINCONF_SDIO_CMD_GPIO
#undef PINCONF_SDIO_DATA0_GPIO
#undef PINCONF_SDIO_DATA1_GPIO
#undef PINCONF_SDIO_DATA2_GPIO
#undef PINCONF_SDIO_DATA3_GPIO
#define PINCONF_SDIO_CLK_GPIO PINCONF(PIN_SDIO_CLK, 0, 0, 0, PINCONF_PULLDOWN)
#define PINCONF_SDIO_CMD_GPIO PINCONF(PIN_SDIO_CMD, 0, 0, 0, PINCONF_PULLDOWN)
#define PINCONF_SDIO_DATA0_GPIO PINCONF(PIN_SDIO_DATA0, 0, 0, 0, PINCONF_PULLDOWN)
#define PINCONF_SDIO_DATA1_GPIO PINCONF(PIN_SDIO_DATA1, 0, 0, 0, PINCONF_PULLDOWN)
#define PINCONF_SDIO_DATA2_GPIO PINCONF(PIN_SDIO_DATA2, 0, 0, 0, PINCONF_PULLDOWN)
#define PINCONF_SDIO_DATA3_GPIO PINCONF(PIN_SDIO_DATA3, 0, 0, 0, PINCONF_PULLDOWN)
#undef PINCONF_SDIO_CD_GPIO
#define PINCONF_SDIO_CD_GPIO PINCONF(PIN_SDIO_CD, 0, 0, 0, PINCONF_PULLUP)
#endif /* __BOARDS_ARM_CXD56XX_SPRESENSE_INCLUDE_BOARD_PINCONFIG_H */