nuttx/net/sixlowpan/Kconfig

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

menu "6LoWPAN Configuration"
	depends on NET_6LOWPAN

config NET_6LOWPAN_FRAG
	bool "6loWPAN Fragmentation"
	default y
	---help---
		CONFIG_NET_6LOWPAN_FRAG specifies if 6lowpan fragmentation should be
		used or not. Fragmentation is on by default.

config NET_6LOWPAN_FRAMELEN
	int "IEEE802.15.4 MAC Frame Length"
	default 127
	range 127 999999
	---help---
		Some wireless devices may use non-standard frame lengths.  This
		setting should never be smaller than 127.

choice
	prompt "6loWPAN Compression"
	default NET_6LOWPAN_COMPRESSION_HC06

config NET_6LOWPAN_COMPRESSION_IPv6
	bool "IPv6 Dispatch"
	---help---
		Packets compression when only IPv6 dispatch is used.  There is no
		compression in this case, all fields are sent inline. We just add
		the IPv6 dispatch byte before the packet.

config NET_6LOWPAN_COMPRESSION_HC1
	bool "6loWPAN HC1"
	---help---
		Compress IP/UDP header using HC1 and HC_UDP

config NET_6LOWPAN_COMPRESSION_HC06
	bool "6loWPAN HC06"
	---help---
		Compress IP/UDP header using HC06 compression

endchoice # 6loWPAN Compression

config NET_6LOWPAN_COMPRESSION_THRESHOLD
	int "Lower compression threshold"
	default 63
	depends on !NET_6LOWPAN_COMPRESSION_IPv6
	---help---
		CONFIG_NET_6LOWPAN_COMPRESSION_THRESHOLD sets a lower threshold for
		when packets should not be compressed.

config NET_6LOWPAN_MINPORT
	hex "Minimum port nubmer"
	default 0xf0b0
	depends on NET_6LOWPAN_COMPRESSION_HC1
	---help---
		HC1 compression of UDP headersis feasible only if both src and dest
		ports are between CONFIG_NET_6LOWPAN_MINPORT and
		CONFIG_NET_6LOWPAN_MINPORT + 15, inclusive.

		All nodes must agree on the value of CONFIG_NET_6LOWPAN_MINPORT

if NET_6LOWPAN_COMPRESSION_HC06

config NET_6LOWPAN_MAXADDRCONTEXT
	int "Maximum address contexts"
	default 1
	---help---
		If we use IPHC compression, how many address contexts do we support?

config NET_6LOWPAN_MAXADDRCONTEXT_PREFIX_0_0
	hex "Address context 0 Prefix 0"
	default 0xaa
	---help---
		Prefix 0 for address context ze0ro (assumes CONFIG_NET_6LOWPAN_MAXADDRCONTEXT >= 0)

config NET_6LOWPAN_MAXADDRCONTEXT_PREFIX_0_1
	hex "Address context 0 Prefix 1"
	default 0xaa
	---help---
		Prefix 1 for address context 0 (assumes CONFIG_NET_6LOWPAN_MAXADDRCONTEXT >= 0)

config NET_6LOWPAN_MAXADDRCONTEXT_PREINIT_1
	bool "Pre-initialize address context 1"
	default n
	---help---
		Preinitialize address context 1 for better header compression
		(Saves up to 13 bytes per 6lowpan packet).   Assumes
		CONFIG_NET_6LOWPAN_MAXADDRCONTEXT >= 1)

if NET_6LOWPAN_MAXADDRCONTEXT_PREINIT_1

config NET_6LOWPAN_MAXADDRCONTEXT_PREFIX_1_0
	hex "Address context 1 Prefix 0"
	default 0xaa
	---help---
		Prefix 0 for address context 1 (assumes CONFIG_NET_6LOWPAN_MAXADDRCONTEXT >= 1)

config NET_6LOWPAN_MAXADDRCONTEXT_PREFIX_1_1
	hex "Address context 1 Prefix 1"
	default 0xaa
	---help---
		Prefix 1 for address context 1 (assumes CONFIG_NET_6LOWPAN_MAXADDRCONTEXT >= 1)

endif # NET_6LOWPAN_MAXADDRCONTEXT_PREINIT_1

config NET_6LOWPAN_MAXADDRCONTEXT_PREINIT_2
	bool "Pre-initialize address context 2"
	default n
	depends on NET_6LOWPAN_MAXADDRCONTEXT_PREINIT_1
	---help---
		Preinitialize any address contexts for better header compression
		(Saves up to 13 bytes per 6lowpan packet).   Assumes
		CONFIG_NET_6LOWPAN_MAXADDRCONTEXT >= 2)

if NET_6LOWPAN_MAXADDRCONTEXT_PREINIT_2

config NET_6LOWPAN_MAXADDRCONTEXT_PREFIX_2_0
	hex "Address context 2 Prefix 0"
	default 0xaa
	---help---
		Prefix 0 for address context 2 (assumes CONFIG_NET_6LOWPAN_MAXADDRCONTEXT >= 2)

config NET_6LOWPAN_MAXADDRCONTEXT_PREFIX_2_1
	hex "Address context 2 Prefix 1"
	default 0xaa
	---help---
		Prefix 1 for address context 2 (assumes CONFIG_NET_6LOWPAN_MAXADDRCONTEXT >= 2)

endif # NET_6LOWPAN_MAXADDRCONTEXT_PREINIT_0
endif # NET_6LOWPAN_COMPRESSION_HC06

config NET_6LOWPAN_EXTENDEDADDR
	bool "Extended Rime address"
	default n
	---help---
		By default, a 2-byte Rime address is used for the IEEE802.15.4 MAC
		device's link layer address.  If this option is selected, then an
		8-byte Rime address will be used.

config NET_6LOWPAN_MAXAGE
	int "Packet reassembly timeout"
	default 20
	---help---
		Timeout for packet reassembly at the 6lowpan layer in units of
		seconds (should be < 60s)

config NET_6LOWPAN_MAX_MACTRANSMITS
	int "Max MAC transmissions"
	default 4
	---help---
		CONFIG_NET_6LOWPAN_MAX_MACTRANSMITS specifies how many times the MAC
		layer should resend packets if no link-layer ACK wasreceived. This
		only makes sense with the csma_driver.

config NET_6LOWPAN_MTU
	int "6LoWPAN packet buffer size"
	default 1294
	range 590 1518
	depends on NET_6LOWPAN_FRAG
	---help---
		Packet buffer size.  This size includes the TCP/UDP payload plus the
		size of TCP/UDP header, the IP header, and the Ethernet header.
		This value is normally referred to as the MTU (Maximum Transmission
		Unit); the payload is the MSS (Maximum Segment Size).

		NOTE that this option depends on fragmentation support.  By
		supporting fragmentation, we can handle quite large "logical" packet
		sizes.  Without fragmentation support, the MTU is equal to the frame
		size and that has already been selected.

config NET_6LOWPAN_TCP_RECVWNDO
	int "6LoWPAN TCP receive window size"
	default 1220 if NET_6LOWPAN_FRAG
	default 102 if !NET_6LOWPAN_FRAG
	depends on NET_TCP
	---help---
		The size of the advertised receiver's window.   Should be set low
		(i.e., to the size of the IEEE802.15.4 MTU or frame payload) if
		the application is slow to process incoming data, or high (32768
		bytes) if the application processes data quickly.

config NET_6LOWPAN_DUMPBUFFER
	bool "Enable dumping of buffer data"
	default n
	depends on DEBUG_NET_INFO
	---help---
		Enable dumping of all packet and frame buffers coming into and out
		of the 6loWPAN logic.  This will generate a large volume of data if
		selected.

endmenu # 6LoWPAN Configuration