nuttx/boards/arm/imxrt/imxrt1170-evk/configs/knsh/defconfig

44 lines
1.2 KiB
Plaintext
Raw Normal View History

Base IMXRT1170 port Co-authored-by: Jari van Ewijk <jari.vanewijk@nxp.com> Co-authored-by: David Sidrane <david.sidrane@nscdg.com> Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com> imxrt:Kconfig fix formatting imxrt:usbphy move IMXRT_USBPHY{1|[2]}_BASE to memory map imxrt:lpspi Fix build breakage from adding 1170 imxrt:Finish 1170 iomux and clockconfig versioning imxrt:Remove duplicate imxrt_clock{off|all}_lpi2c4 imxrt:pmu remove duplicate dcd non 117x header imxrt:lpspi Fix unused var warnings imxrt:lpi2c Fix unused var warnings imxrt:lowputs Fix unused var warnings imxrt:imxrt117x_dmamux fix duplicate entries imxtr:serial Use IOMUX_PULL_{UP|DOWN} and map IOMUX V1 to them imxrt:MPU Support the 1170 imxrt:dmamux Alias IMXRT_DMAMUX0_BASE as IMXRT_DMAMUX_BASE imx1170:ccm Alias CCM_CCGR_DMA & CCM_CCGR_SNVS_LP for compatiblity Author: Peter van der Perk <peter.vanderperk@nxp.com> IMXRT7 Add LPUART 9/10/11/12 support Author: David Sidrane <david.sidrane@nscdg.com> imxrt:1170pinmux Add QTIMER pins imxrt:1170pinmux Add GPT pins imxrt:1170pinmux Add FLEXPWM pins imxrt1170:pinmap Add GPIO_ENET_1G pinning imxrt:enet Support ENET_1G imxrt:periphclks rt1170 does not have canX_serial clock imxrt:flexcan:Layer imxrt_ioctl imxrt117x:memorymap added CAN3 imxrt:ADC support ver1 and ver2 for imxrt117x imxrt:imxrt117x_ccm Align timer naming with other imxrt QTIMERn->TIMERn imxrt:imxrt117x_ccm align CCM names with rt106x imxrt:XBAR support larger number of selects needed on imxrt1170 Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com> FlexSPI AHB Region support, PIT rename for compatiblity imxrt:USB Analog add VBUS_VALID_3V FlexSPI expand prefetch registers for IMXRT117X imxrt:Support Initialization of FlexRam without Running from OCRAM imxrt: ocotp add UNIQUE_ID register definition imxrt: enet use ocotp unique_id imxrt: enet fixes for imxrt117x imxrt: ethernet pinmux sion enable imxrt:imxrt_periphclk_configure add memory sync Flush the pipeline to prevent bus faults, by insuring a peripheral is clocked before being accessed on return from this function. imxrt:Restructure gpioN to padmux mapping imxrt:Add imxrt1170 daisy imxrt: correct power modes for imxrt117x fixing hang on WFI imxrt: imxrt117x TCM MPU config imxrt: FlexRAM clocking DIV0 setup imxrt: 117x periphclocks wait for status bit imxrt: iomucx set pad settings correctly and allow reconfiguration imxrt: enet align buffers 64-byte for optimal performance Add DSC barriers for write-through cache support imxrt: imxrt1170 use FlexCAN FD/ECC features imxrt:iomuxc_ver2 (117x) SD_B1 and DISP_B1 use PULL feild not PUE/PUS imxrt:Fix 1170 SNVS addressing imxrt: enet set mii clock after ifdown so that phy keep working nxstyle fixes imxrt: preprocessor and include fixes Fix configs imxrt1170-evk clean defconfig
2023-01-25 15:40:00 +01:00
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_ARCH_RAMFUNCS is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="imxrt1170-evk"
CONFIG_ARCH_BOARD_IMXRT1170_EVK=y
CONFIG_ARCH_CHIP="imxrt"
CONFIG_ARCH_CHIP_IMXRT=y
CONFIG_ARCH_CHIP_MIMXRT1176DVMAA=y
CONFIG_ARCH_INTERRUPTSTACK=900
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_ARMV7M_ITCM=y
CONFIG_ARMV7M_USEBASEPRI=y
CONFIG_ARM_MPU=y
CONFIG_BOARD_LOOPSPERMSEC=104926
CONFIG_BUILD_PROTECTED=y
CONFIG_FS_PROCFS=y
CONFIG_IDLETHREAD_STACKSIZE=2048
CONFIG_IMXRT_LPUART1=y
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INTELHEX_BINARY=y
CONFIG_LPUART1_SERIAL_CONSOLE=y
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_DISABLE_MKRD=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
CONFIG_NSH_READLINE=y
CONFIG_NUTTX_USERSPACE=0x30200000
CONFIG_PASS1_BUILDIR="boards/arm/imxrt/imxrt1170-evk/kernel"
CONFIG_RAM_SIZE=1048576
CONFIG_RAM_START=0x20200000
CONFIG_SCHED_WAITPID=y
CONFIG_START_DAY=8
CONFIG_START_MONTH=6
CONFIG_SYSTEM_NSH=y