nuttx/net/bluetooth/bluetooth.h

/****************************************************************************
 * net/bluetooth/bluetooth.h
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

#ifndef __NET_BLUETOOTH_BLUETOOTH_H
#define __NET_BLUETOOTH_BLUETOOTH_H

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <sys/types.h>
#include <sys/socket.h>

#include <nuttx/net/net.h>

#include <nuttx/wireless/bluetooth/bt_hci.h>

#ifdef CONFIG_NET_BLUETOOTH

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/* Allocate a new Bluetooth socket data callback */

#define bluetooth_callback_alloc(dev,conn) \
  devif_callback_alloc(dev, &conn->bc_conn.list, &conn->bc_conn.list_tail)
#define bluetooth_callback_free(dev,conn,cb) \
  devif_conn_callback_free(dev, cb, &conn->bc_conn.list, &conn->bc_conn.list_tail)

/* Memory Pools */

#define BLUETOOTH_POOL_PREALLOCATED  0
#define BLUETOOTH_POOL_DYNAMIC       1

/****************************************************************************
 * Public Type Definitions
 ****************************************************************************/

/* Used for containing and queuing IOBs along with information about the
 * source of the frame.
 */

struct iob_s;  /* Forward reference */

struct bluetooth_container_s
{
  FAR struct bluetooth_container_s *bn_flink; /* Supports a singly linked list */
  FAR struct iob_s *bn_iob;                   /* Contained IOB */
  bt_addr_t bn_raddr;                         /* Source address of the packet */
  uint8_t bn_channel;                         /* Source channel of the packet */
  uint8_t bn_pool;                            /* See BLUETOOTH_POOL_* definitions */
};

/* Representation of a Bluetooth socket connection */

struct devif_callback_s;                      /* Forward reference */

struct bluetooth_conn_s
{
  /* Common prologue of all connection structures. */

  struct socket_conn_s bc_conn;

  /* Bluetooth-specific content follows. */

  bt_addr_t bc_laddr;                         /* Locally bound / source address.
                                               * Necessary only to support multiple
                                               * Bluetooth devices */
  bt_addr_t bc_raddr;                         /* Connected remote address */
  uint8_t bc_ldev;                            /* Locally bound device */
  uint8_t bc_channel;                         /* Connection channel */
  uint8_t bc_crefs;                           /* Reference counts on this instance */
#if CONFIG_NET_BLUETOOTH_BACKLOG > 0
  uint8_t bc_backlog;                         /* Number of frames in RX queue */
#endif
  uint8_t bc_proto;                           /* Protocol */

  /* Queue of incoming packets */

  FAR struct bluetooth_container_s *bc_rxhead;
  FAR struct bluetooth_container_s *bc_rxtail;
};

/****************************************************************************
 * Public Data
 ****************************************************************************/

#ifdef __cplusplus
#  define EXTERN extern "C"
extern "C"
{
#else
#  define EXTERN extern
#endif

/* The Bluetooth socket interface */

EXTERN const struct sock_intf_s g_bluetooth_sockif;

/****************************************************************************
 * Public Function Prototypes
 ****************************************************************************/

struct bluetooth_frame_meta_s;  /* Forward reference */
struct radio_driver_s;          /* Forward reference */
struct net_driver_s;            /* Forward reference */
struct socket;                  /* Forward reference */
struct sockaddr;                /* Forward reference */

/****************************************************************************
 * Name: bluetooth_initialize()
 *
 * Description:
 *   Initialize the Bluetooth socket support.  Called once and only
 *   from the network initialization logic.
 *
 * Assumptions:
 *   Called early in the initialization sequence
 *
 ****************************************************************************/

void bluetooth_initialize(void);

/****************************************************************************
 * Name: bluetooth_conn_initialize
 *
 * Description:
 *   Initialize the Bluetooth connection structure allocator.  Called
 *   once and only from bluetooth_initialize().
 *
 * Assumptions:
 *   Called early in the initialization sequence
 *
 ****************************************************************************/

void bluetooth_conn_initialize(void);

/****************************************************************************
 * Name: bluetooth_conn_alloc()
 *
 * Description:
 *   Allocate a new, uninitialized Bluetooth socket connection
 *   structure. This is normally something done by the implementation of
 *   the socket() API
 *
 ****************************************************************************/

FAR struct bluetooth_conn_s *bluetooth_conn_alloc(void);

/****************************************************************************
 * Name: bluetooth_conn_free()
 *
 * Description:
 *   Free a Bluetooth socket connection structure that is no longer in
 *   use.  This should be done by the implementation of close().
 *
 ****************************************************************************/

void bluetooth_conn_free(FAR struct bluetooth_conn_s *conn);

/****************************************************************************
 * Name: bluetooth_conn_active()
 *
 * Description:
 *   Find a connection structure that is the appropriate
 *   connection to be used with the provided Ethernet header
 *
 * Assumptions:
 *   This function is called from network logic at with the network locked.
 *
 ****************************************************************************/

FAR struct bluetooth_conn_s *
  bluetooth_conn_active(FAR const struct bluetooth_frame_meta_s *meta);

/****************************************************************************
 * Name: bluetooth_conn_next()
 *
 * Description:
 *   Traverse the list of allocated Bluetooth connections
 *
 * Assumptions:
 *   This function is called from network logic at with the network locked.
 *
 ****************************************************************************/

FAR struct bluetooth_conn_s *
  bluetooth_conn_next(FAR struct bluetooth_conn_s *conn);

/****************************************************************************
 * Name: bluetooth_input
 *
 * Description:
 *   Handle incoming Bluetooth input
 *
 *   This function is called when the radio device driver has received an
 *   frame from the network.  The frame from the device driver must be
 *   provided in by the IOB frame argument of the  function call:
 *
 *   - The frame data is in the IOB io_data[] buffer,
 *   - The length of the frame is in the IOB io_len field, and
 *   - The offset past and radio MAC header is provided in the io_offset
 *     field.
 *
 *   The frame argument may refer to a single frame (a list of length one)
 *   or may it be the head of a list of multiple frames.
 *
 *   - The io_flink field points to the next frame in the list (if enable)
 *   - The last frame in the list will have io_flink == NULL.
 *
 * Input Parameters:
 *   radio       The radio network driver interface.
 *   framelist - The head of an incoming list of frames.  Normally this
 *               would be a single frame.  A list may be provided if
 *               appropriate, however.
 *   meta      - Meta data characterizing the received frame.
 *
 *               If there are multiple frames in the list, this metadata
 *               must apply to all of the frames in the list.
 *
 * Returned Value:
 *   OK    The Bluetooth has been processed  and can be deleted
 *   ERROR Hold the Bluetooth and try again later. There is a listening
 *         socket but no recv in place to catch the Bluetooth yet.
 *         Useful when a packet arrives before a recv call is in place.
 *
 * Assumptions:
 *   Called from the network diver with the network locked.
 *
 ****************************************************************************/

/* bluetooth_input() is prototyped in include/nuttx/net/bluetooth.h */

/****************************************************************************
 * Name: bluetooth_callback
 *
 * Description:
 *   Inform the application holding the Bluetooth socket of a change in
 *   state.
 *
 * Returned Value:
 *   OK if Bluetooth has been processed, otherwise ERROR.
 *
 * Assumptions:
 *   This function is called from network logic at with the network locked.
 *
 ****************************************************************************/

uint16_t bluetooth_callback(FAR struct radio_driver_s *radio,
                             FAR struct bluetooth_conn_s *conn,
                             uint16_t flags);

/****************************************************************************
 * Name: bluetooth_recvmsg
 *
 * Description:
 *   Implements the socket recvfrom interface for the case of the AF_INET
 *   and AF_INET6 address families.  bluetooth_recvmsg() receives messages
 *   from a socket, and may be used to receive data on a socket whether or
 *   not it is connection-oriented.
 *
 *   If msg_name is not NULL, and the underlying protocol provides the source
 *   address, this source address is filled in. The argument 'msg_namelen' is
 *   initialized to the size of the buffer associated with msg_name, and
 *   modified on return to indicate the actual size of the address stored
 *   there.
 *
 * Input Parameters:
 *   psock    A pointer to a NuttX-specific, internal socket structure
 *   msg      Buffer to receive data
 *   flags    Receive flags
 *
 * Returned Value:
 *   On success, returns the number of characters received. If no data is
 *   available to be received and the peer has performed an orderly shutdown,
 *   recvmsg() will return 0. Otherwise, on errors, a negated errno value is
 *   returned (see recvmsg() for the list of appropriate error values).
 *
 ****************************************************************************/

ssize_t bluetooth_recvmsg(FAR struct socket *psock, FAR struct msghdr *msg,
                          int flags);

/****************************************************************************
 * Name: bluetooth_find_device
 *
 * Description:
 *   Select the network driver to use with the Bluetooth transaction.
 *
 * Input Parameters:
 *   conn - Bluetooth connection structure (not currently used).
 *   addr - The address to match the devices assigned address
 *
 * Returned Value:
 *   A pointer to the network driver to use.  NULL is returned on any
 *   failure.
 *
 ****************************************************************************/

FAR struct radio_driver_s *
  bluetooth_find_device(FAR struct bluetooth_conn_s *conn,
                        FAR const bt_addr_t *addr);

/****************************************************************************
 * Name: bluetooth_poll
 *
 * Description:
 *   Poll a Bluetooth "connection" structure for availability of TX data
 *
 * Input Parameters:
 *   dev - The device driver structure to use in the send operation
 *   conn - The Bluetooth "connection" to poll for TX data
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *   Called from the network device interface (devif) with the network
 *   locked.
 *
 ****************************************************************************/

void bluetooth_poll(FAR struct net_driver_s *dev,
                     FAR struct bluetooth_conn_s *conn);

/****************************************************************************
 * Name: bluetooth_sendmsg
 *
 * Description:
 *   If sendmsg() is used on a connection-mode (SOCK_STREAM, SOCK_SEQPACKET)
 *   socket, the parameters msg_name and msg_namelen are ignored (and the
 *   error EISCONN may be returned when they are not NULL and 0), and the
 *   error ENOTCONN is returned when the socket was not actually connected.
 *
 * Input Parameters:
 *   psock    A pointer to a NuttX-specific, internal socket structure
 *   msg      data to send
 *   flags    Send flags
 *
 * Returned Value:
 *   On success, returns the number of characters sent.  On error,
 *   a negated errno value is returned.  See sendmsg() for the complete list
 *   of return values.
 *
 ****************************************************************************/

ssize_t bluetooth_sendmsg(FAR struct socket *psock, FAR struct msghdr *msg,
                          int flags);

/****************************************************************************
 * Name: bluetooth_container_initialize
 *
 * Description:
 *   This function initializes the container allocator.  This function must
 *   be called early in the initialization sequence before any socket
 *   activity.
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *   Called early in the initialization sequence
 *
 ****************************************************************************/

void bluetooth_container_initialize(void);

/****************************************************************************
 * Name: bluetooth_container_allocate
 *
 * Description:
 *   The bluetooth_container_allocate function will get a free container
 *   for use by the recvfrom() logic.
 *
 *   This function will first attempt to allocate from the g_free_container
 *   list.  If that the list is empty, then the meta-data structure will be
 *   allocated from the dynamic memory pool.
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   A reference to the allocated container structure.  All user fields in
 *   this structure have been zeroed.  On a failure to allocate, NULL is
 *   returned.
 *
 * Assumptions:
 *   The caller has locked the network.
 *
 ****************************************************************************/

FAR struct bluetooth_container_s *bluetooth_container_allocate(void);

/****************************************************************************
 * Name: bluetooth_container_free
 *
 * Description:
 *   The bluetooth_container_free function will return a container structure
 *   to the free list of containers if it was a pre-allocated container
 *   structure. If the container structure was allocated dynamically it will
 *   be deallocated.
 *
 * Input Parameters:
 *   container - container structure to free
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *   The caller has locked the network.
 *
 ****************************************************************************/

void bluetooth_container_free(FAR struct bluetooth_container_s *container);

#undef EXTERN
#ifdef __cplusplus
}
#endif

#endif /* CONFIG_NET_BLUETOOTH */
#endif /* __NET_BLUETOOTH_BLUETOOTH_H */