sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9b68971853
nuttx/drivers/sensors/CMakeLists.txt

350 lines
6.9 KiB
CMake
Raw Normal View History

build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 07:15:30 +01:00
# ##############################################################################
# drivers/sensors/CMakeLists.txt
#
# Licensed to the Apache Software Foundation (ASF) under one or more contributor
# license agreements. See the NOTICE file distributed with this work for
# additional information regarding copyright ownership. The ASF licenses this
# file to you under the Apache License, Version 2.0 (the "License"); you may not
# use this file except in compliance with the License. You may obtain a copy of
# the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations under
# the License.
#
# ##############################################################################
if(CONFIG_SENSORS)
set(SRCS sensor.c)
if(CONFIG_USENSOR)
list(APPEND SRCS usensor.c)
endif()
if(CONFIG_SENSORS_RPMSG)
list(APPEND SRCS sensor_rpmsg.c)
endif()
if(CONFIG_SENSORS_WTGAHRS2)
list(APPEND SRCS wtgahrs2.c)
endif()
if(CONFIG_SENSORS_FAKESENSOR)
list(APPEND SRCS fakesensor.c)
endif()
if(CONFIG_SENSORS_HCSR04)
list(APPEND SRCS hc_sr04.c)
endif()
if(CONFIG_SENSORS_ADXL345)
list(APPEND SRCS adxl345_base.c)
endif()
if(CONFIG_SENSORS_DHTXX)
list(APPEND SRCS dhtxx.c)
endif()
cmake: add support for sensors/bmi270
2023-09-08 09:58:39 +02:00
if(CONFIG_SENSORS_BMI270)
list(APPEND SRCS bmi270.c)
endif()
build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 07:15:30 +01:00
# These drivers depend on I2C support
if(CONFIG_I2C)
if(CONFIG_SENSORS_APDS9960)
list(APPEND SRCS apds9960.c)
endif()
if(CONFIG_SENSORS_AK09912)
list(APPEND SRCS ak09912.c)
endif()
if(CONFIG_SENSORS_AS5048B)
list(APPEND SRCS as5048b.c)
endif()
if(CONFIG_SENSORS_AS726X)
list(APPEND SRCS as726x.c)
endif()
if(CONFIG_SENSORS_FXOS8700CQ)
list(APPEND SRCS fxos8700cq.c)
endif()
if(CONFIG_SENSORS_HYT271)
list(APPEND SRCS hyt271.c)
endif()
if(CONFIG_SENSORS_KXTJ9)
list(APPEND SRCS kxtj9.c)
endif()
if(CONFIG_SENSORS_LIS2DH)
list(APPEND SRCS lis2dh.c)
endif()
if(CONFIG_LIS331DL)
list(APPEND SRCS lis331dl.c)
endif()
if(CONFIG_SENSORS_LSM303AGR)
list(APPEND SRCS lsm303agr.c)
endif()
if(CONFIG_SENSORS_LSM6DSL)
list(APPEND SRCS lsm6dsl.c)
endif()
if(CONFIG_SENSORS_LSM9DS1)
list(APPEND SRCS lsm9ds1.c)
endif()
if(CONFIG_SENSORS_MSA301)
list(APPEND SRCS msa301.c)
endif()
if(CONFIG_SENSORS_LPS25H)
list(APPEND SRCS lps25h.c)
endif()
if(CONFIG_ADXL345_I2C)
list(APPEND SRCS adxl345_i2c.c)
endif()
if(CONFIG_SENSORS_BH1750FVI)
list(APPEND SRCS bh1750fvi.c)
endif()
if(CONFIG_SENSORS_BMG160)
list(APPEND SRCS bmg160.c)
endif()
if(CONFIG_SENSORS_BMI160)
list(APPEND SRCS bmi160.c)
endif()
if(CONFIG_SENSORS_BMP180)
list(APPEND SRCS bmp180.c)
endif()
if(CONFIG_SENSORS_BMP280)
list(APPEND SRCS bmp280.c)
endif()
drivers: Added support for BME680 drivers/sensors/bme680.c: The bme680 driver sensor.h: Added new type of sensor (Gas) to be used for retrieving the bme680 data esp32/common/src/esp32_bme680.c: bme680 support on esp32 esp32/esp32-sparrow_kit/esp32_bringup.c: added support for the bme680 esp32/esp32-sparrow-kit/configs/nsh/defconfig: fixed defconfig ci problem Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com> esp32-sparrow-kit: Fixed defconfig Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com> Code is now C89 compatible Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com> Reused already defined sensor data structs by registering every sub-sensor separately Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com> Implemented suggestions Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
2023-07-14 14:57:13 +02:00
if(CONFIG_SENSORS_BME680)
list(APPEND SRCS bme680.c)
endif()
build: add initial cmake build system 1. Update all CMakeLists.txt to adapt to new layout 2. Fix cmake build break 3. Update all new file license 4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose) ------------------ How to test From within nuttx/. Configure: cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja (or full path in custom board) : cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja This uses ninja generator (install with sudo apt install ninja-build). To build: $ cmake --build build menuconfig: $ cmake --build build -t menuconfig -------------------------- 2. cmake/build: reformat the cmake style by cmake-format https://github.com/cheshirekow/cmake_format $ pip install cmakelang $ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done $ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done Co-authored-by: Matias N <matias@protobits.dev> Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 07:15:30 +01:00
if(CONFIG_SENSORS_ISL29023)
list(APPEND SRCS isl29023.c)
endif()
if(CONFIG_SENSORS_HTS221)
list(APPEND SRCS hts221.c)
endif()
if(CONFIG_LM75_I2C)
list(APPEND SRCS lm75.c)
endif()
if(CONFIG_SENSORS_LM92)
list(APPEND SRCS lm92.c)
endif()
if(CONFIG_SENSORS_MAX44009)
list(APPEND SRCS max44009.c)
endif()
if(CONFIG_SENSORS_MB7040)
list(APPEND SRCS mb7040.c)
endif()
if(CONFIG_SENSORS_MCP9844)
list(APPEND SRCS mcp9844.c)
endif()
if(CONFIG_SENSORS_MLX90393)
list(APPEND SRCS mlx90393.c)
endif()
if(CONFIG_SENSORS_MLX90614)
list(APPEND SRCS mlx90614.c)
endif()
if(CONFIG_SENSORS_MS5611)
list(APPEND SRCS ms5611.c)
endif()
if(CONFIG_SENSORS_MS58XX)
list(APPEND SRCS ms58xx.c)
endif()
if(CONFIG_SENSORS_LTC4151)
list(APPEND SRCS ltc4151.c)
endif()
if(CONFIG_SENSORS_INA219)
list(APPEND SRCS ina219.c)
endif()
if(CONFIG_SENSORS_INA226)
list(APPEND SRCS ina226.c)
endif()
if(CONFIG_SENSORS_INA3221)
list(APPEND SRCS ina3221.c)
endif()
if(CONFIG_SENSORS_SCD30)
list(APPEND SRCS scd30.c)
endif()
if(CONFIG_SENSORS_SCD41)
list(APPEND SRCS scd41.c)
endif()
if(CONFIG_SENSORS_SGP30)
list(APPEND SRCS sgp30.c)
endif()
if(CONFIG_SENSORS_AHT10)
list(APPEND SRCS aht10.c)
endif()
if(CONFIG_SENSORS_SHT21)
list(APPEND SRCS sht21.c)
endif()
if(CONFIG_SENSORS_SHT3X)
list(APPEND SRCS sht3x.c)
endif()
if(CONFIG_SENSORS_SPS30)
list(APPEND SRCS sps30.c)
endif()
if(CONFIG_SENSORS_T67XX)
list(APPEND SRCS t67xx.c)
endif()
endif() # CONFIG_I2C
# These drivers depend on SPI support
if(CONFIG_SPI)
if(CONFIG_ADXL345_SPI)
list(APPEND SRCS adxl345_spi.c)
endif()
if(CONFIG_SENSORS_ADXL372)
list(APPEND SRCS adxl372.c)
endif()
if(CONFIG_LIS3DSH)
list(APPEND SRCS lis3dsh.c)
endif()
if(CONFIG_LIS3DH)
list(APPEND SRCS lis3dh.c)
endif()
if(CONFIG_SENSORS_MAX31855)
list(APPEND SRCS max31855.c)
endif()
if(CONFIG_SENSORS_MAX6675)
list(APPEND SRCS max6675.c)
endif()
if(CONFIG_SENSORS_MPL115A)
list(APPEND SRCS mpl115a.c)
endif()
if(CONFIG_SENSORS_LIS3MDL)
list(APPEND SRCS lis3mdl.c)
endif()
if(CONFIG_SENSORS_LSM330SPI)
list(APPEND SRCS lsm330_spi.c)
endif()
if(CONFIG_SENSORS_L3GD20)
list(APPEND SRCS l3gd20.c)
endif()
if(CONFIG_SENSORS_ADT7320)
list(APPEND SRCS adt7320.c)
endif()
if(CONFIG_SENSORS_AS5048A)
list(APPEND SRCS as5048a.c)
endif()
endif() # CONFIG_SPI
# These drivers depend on 1WIRE support
if(CONFIG_1WIRE)
if(CONFIG_SENSORS_DS18B20)
list(APPEND SRCS ds18b20.c)
endif()
endif() # CONFIG_1WIRE
if(CONFIG_SENSORS_MPU60X0)
list(APPEND SRCS mpu60x0.c)
endif()
# Quadrature encoder upper half
if(CONFIG_SENSORS_QENCODER)
list(APPEND SRCS qencoder.c)
endif()
# 3-phase Hall effect sensor upper half
if(CONFIG_SENSORS_HALL3PHASE)
list(APPEND SRCS hall3ph.c)
endif()
# Vishay VEML6070
if(CONFIG_SENSORS_VEML6070)
list(APPEND SRCS veml6070.c)
endif()
# ST VL53L1X
if(CONFIG_SENSORS_VL53L1X)
list(APPEND SRCS vl53l1x.c)
endif()
# Sensixs XEN1210
if(CONFIG_SENSORS_XEN1210)
list(APPEND SRCS xen1210.c)
endif()
# Zero Cross upper half
if(CONFIG_SENSORS_ZEROCROSS)
list(APPEND SRCS zerocross.c)
endif()
# TI HDC1008
if(CONFIG_SENSORS_HDC1008)
list(APPEND SRCS hdc1008.c)
endif()
target_sources(drivers PRIVATE ${SRCS})
endif()
Reference in New Issue Copy Permalink