sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9f6383e5fd
nuttx/configs/clicker2-stm32/xbee-6lowpan/defconfig

113 lines
3.0 KiB
Plaintext
Raw Normal View History

Squashed commit of the following: arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything." arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 20:30:37 +02:00
# CONFIG_DEV_CONSOLE is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_NET_IPv4 is not set
# CONFIG_NSH_DISABLE_TELNETD is not set
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="clicker2-stm32"
CONFIG_ARCH_BOARD_CLICKER2_STM32=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_CHIP_STM32=y
Squashed commit of the following: arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything." arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 20:30:37 +02:00
CONFIG_ARCH_CHIP_STM32F407VG=y
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
CONFIG_ARCH_IRQBUTTONS=y
CONFIG_ARCH_STACKDUMP=y
CONFIG_BOARDCTL_USBDEVCTRL=y
CONFIG_BOARD_INITIALIZE=y
CONFIG_BOARD_LOOPSPERMSEC=16717
CONFIG_BUILTIN=y
Squashed commit of the following: arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything." arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 20:30:37 +02:00
CONFIG_CDCACM=y
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
CONFIG_CDCACM_CONSOLE=y
CONFIG_CDCACM_RXBUFSIZE=256
CONFIG_CDCACM_TXBUFSIZE=256
CONFIG_CLICKER2_STM32_MB1_XBEE=y
CONFIG_DRIVERS_IEEE802154=y
CONFIG_DRIVERS_WIRELESS=y
Squashed commit of the following: arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything." arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 20:30:37 +02:00
CONFIG_EXAMPLES_NETTEST=y
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
CONFIG_EXAMPLES_NETTEST_DEVNAME="wpan0"
CONFIG_EXAMPLES_NETTEST_SERVERIPv6ADDR_1=0xfe80
CONFIG_EXAMPLES_NETTEST_SERVERIPv6ADDR_6=0x00ff
CONFIG_EXAMPLES_NETTEST_SERVERIPv6ADDR_7=0xfe00
CONFIG_EXAMPLES_NETTEST_SERVERIPv6ADDR_8=0x0800
CONFIG_EXAMPLES_NETTEST_SERVER_PORTNO=61616
CONFIG_EXAMPLES_NETTEST_TARGET2=y
Squashed commit of the following: arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything." arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 20:30:37 +02:00
CONFIG_EXAMPLES_UDP=y
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
CONFIG_EXAMPLES_UDP_CLIENT_PORTNO=61617
CONFIG_EXAMPLES_UDP_DEVNAME="wpan0"
CONFIG_EXAMPLES_UDP_SERVERIPv6ADDR_1=0xfe80
CONFIG_EXAMPLES_UDP_SERVERIPv6ADDR_6=0x00ff
CONFIG_EXAMPLES_UDP_SERVERIPv6ADDR_7=0xfe00
CONFIG_EXAMPLES_UDP_SERVERIPv6ADDR_8=0x0d00
CONFIG_EXAMPLES_UDP_SERVER_PORTNO=61616
CONFIG_EXAMPLES_UDP_TARGET2=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FS_FAT=y
CONFIG_FS_PROCFS=y
CONFIG_HAVE_CXX=y
Squashed commit of the following: arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything." arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 20:30:37 +02:00
CONFIG_HAVE_CXXINITIALIZE=y
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
CONFIG_IEEE802154_I8SAK=y
CONFIG_IEEE802154_XBEE=y
CONFIG_INTELHEX_BINARY=y
CONFIG_IOB_BUFSIZE=128
CONFIG_IOB_NBUFFERS=32
CONFIG_IOB_NCHAINS=16
CONFIG_MAX_TASKS=16
CONFIG_MAX_WDOGPARMS=2
Squashed commit of the following: arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything." arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 20:30:37 +02:00
CONFIG_NET=y
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
CONFIG_NETDEVICES=y
CONFIG_NETDEV_LATEINIT=y
CONFIG_NETDEV_WIRELESS_IOCTL=y
Squashed commit of the following: arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything." arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 20:30:37 +02:00
CONFIG_NETUTILS_TELNETD=y
CONFIG_NET_6LOWPAN=y
CONFIG_NET_BROADCAST=y
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
CONFIG_NET_HOSTNAME="XBee"
CONFIG_NET_IPv6=y
CONFIG_NET_SOCKOPTS=y
CONFIG_NET_STATISTICS=y
Squashed commit of the following: arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything." arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 20:30:37 +02:00
CONFIG_NET_TCP=y
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
CONFIG_NET_TCPBACKLOG=y
CONFIG_NET_TCP_WRITE_BUFFERS=y
CONFIG_NET_UDP=y
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_DISABLE_GET=y
CONFIG_NSH_DISABLE_PUT=y
CONFIG_NSH_DISABLE_WGET=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
CONFIG_NSH_NETLOCAL=y
CONFIG_NSH_NOMAC=y
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_PREALLOC_TIMERS=4
CONFIG_PREALLOC_WDOGS=16
Squashed commit of the following: arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything." arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 20:30:37 +02:00
CONFIG_RAMLOG=y
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
CONFIG_RAMLOG_BUFSIZE=8192
CONFIG_RAMLOG_SYSLOG=y
CONFIG_RAM_SIZE=131072
CONFIG_RAM_START=0x20000000
CONFIG_RAW_BINARY=y
CONFIG_RR_INTERVAL=200
Squashed commit of the following: arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything." arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 20:30:37 +02:00
CONFIG_SCHED_HPWORK=y
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
CONFIG_SCHED_HPWORKPRIORITY=192
CONFIG_SCHED_LPWORK=y
Squashed commit of the following: arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything." arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 20:30:37 +02:00
CONFIG_SCHED_LPWORKPRIORITY=160
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
CONFIG_SCHED_WAITPID=y
CONFIG_SDCLONE_DISABLE=y
CONFIG_STANDARD_SERIAL=y
CONFIG_START_YEAR=2013
CONFIG_STM32_CCMEXCLUDE=y
CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
CONFIG_STM32_JTAG_SW_ENABLE=y
CONFIG_STM32_OTGFS=y
CONFIG_STM32_PWR=y
configs/: Refresh ARM and Xtensa configurations.
2018-08-20 01:48:13 +02:00
CONFIG_SYSTEM_NSH=y
CONFIG_SYSTEM_NSH_CXXINITIALIZE=y
Merged in merlin17/nuttx/xbee (pull request #484) drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface * drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev * configs/same70-xplained: Starts adding support for XBee radio * drivers/wireless/ieee802154/xbee: More structuring of XBee driver * drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2 * drivers/wireless/ieee802154/xbee: More XBee MAC code * configs/clicker2-stm32: More work to add XBee radio support * drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors * configs/clicker2-stm32: Adjustments to XBee click module support * drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields * drivers/xbee: XBee network device now passes MAC events via IOCTL * drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic * configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic * drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV * drivers/xbee: Supports MAC RESET.request primitive * drivers/xbee: Exposes generic AT query to the rest of driver * drivers/xbee: Sets local values when writing setting change to Xbee device * drivers/xbee: Finish association logic * drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame * drivers/xbee: Finishes transmit/receive logic * drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c * drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:37:55 +02:00
CONFIG_SYSTEM_TELNET_CLIENT=y
CONFIG_TASK_NAME_SIZE=32
CONFIG_USBDEV=y
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_WIRELESS=y
Squashed commit of the following: arch/arm: Remove support for CONFIG_ARMV7M_CMNVECTOR. It is now the only vector support available. Also remove CONFIG_HAVE_CMNVECTOR. That no longer signifies anything." arch/arm/src/stm32: This commit removes support for the dedicated vector handling from the STM32 architecture support. Only common vectors are now supported.
2018-06-20 20:30:37 +02:00
CONFIG_WIRELESS_IEEE802154=y
Reference in New Issue Copy Permalink