nuttx/sched/signal/sig_dispatch.c

625 lines
18 KiB
C
Raw Normal View History

/****************************************************************************
* sched/signal/sig_dispatch.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <inttypes.h>
#include <string.h>
#include <signal.h>
#include <unistd.h>
#include <sched.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/irq.h>
#include <nuttx/arch.h>
#include <nuttx/signal.h>
#include <nuttx/queue.h>
#include "sched/sched.h"
#include "group/group.h"
#include "semaphore/semaphore.h"
#include "signal/signal.h"
#include "mqueue/mqueue.h"
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
* Name: nxsig_queue_action
*
* Description:
* Queue a signal action for delivery to a task.
*
* Returned Value:
* Returns 0 (OK) on success or a negated errno value on failure.
*
****************************************************************************/
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
static int nxsig_queue_action(FAR struct tcb_s *stcb, siginfo_t *info)
{
FAR sigactq_t *sigact;
FAR sigq_t *sigq;
irqstate_t flags;
int ret = OK;
sched_lock();
DEBUGASSERT(stcb != NULL && stcb->group != NULL);
/* Find the group sigaction associated with this signal */
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
sigact = nxsig_find_action(stcb->group, info->si_signo);
/* Check if a valid signal handler is available and if the signal is
2020-10-04 17:48:34 +02:00
* unblocked. NOTE: There is no default action.
*/
if ((sigact) && (sigact->act.sa_u._sa_sigaction))
{
2020-10-04 17:48:34 +02:00
/* Allocate a new element for the signal queue. NOTE:
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
* nxsig_alloc_pendingsigaction will force a system crash if it is
* unable to allocate memory for the signal data.
*/
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
sigq = nxsig_alloc_pendingsigaction();
if (!sigq)
{
ret = -ENOMEM;
}
else
{
/* Populate the new signal queue element */
2015-10-08 03:59:14 +02:00
sigq->action.sighandler = sigact->act.sa_u._sa_sigaction;
sigq->mask = sigact->act.sa_mask;
if ((sigact->act.sa_flags & SA_NODEFER) == 0)
{
sigq->mask |= SIGNO2SET(info->si_signo);
}
2015-10-08 03:59:14 +02:00
memcpy(&sigq->info, info, sizeof(siginfo_t));
2015-10-08 03:59:14 +02:00
/* Put it at the end of the pending signals list */
flags = enter_critical_section();
2015-10-08 03:59:14 +02:00
sq_addlast((FAR sq_entry_t *)sigq, &(stcb->sigpendactionq));
/* Then schedule execution of the signal handling action on the
* recipient's thread. SMP related handling will be done in
* up_schedule_sigaction()
*/
up_schedule_sigaction(stcb, nxsig_deliver);
leave_critical_section(flags);
}
}
sched_unlock();
return ret;
}
/****************************************************************************
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
* Name: nxsig_alloc_pendingsignal
*
* Description:
* Allocate a pending signal list entry
*
****************************************************************************/
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
static FAR sigpendq_t *nxsig_alloc_pendingsignal(void)
{
FAR sigpendq_t *sigpend;
irqstate_t flags;
/* Check if we were called from an interrupt handler. */
if (up_interrupt_context())
{
/* Try to get the pending signal structure from the free list */
2015-10-08 03:59:14 +02:00
sigpend = (FAR sigpendq_t *)sq_remfirst(&g_sigpendingsignal);
if (!sigpend)
{
/* If no pending signal structure is available in the free list,
* then try the special list of structures reserved for
* interrupt handlers
*/
2015-10-08 03:59:14 +02:00
sigpend = (FAR sigpendq_t *)sq_remfirst(&g_sigpendingirqsignal);
}
}
/* If we were not called from an interrupt handler, then we are
2015-12-11 17:06:40 +01:00
* free to allocate pending action structures if necessary.
*/
else
{
/* Try to get the pending signal structure from the free list */
flags = enter_critical_section();
2015-10-08 03:59:14 +02:00
sigpend = (FAR sigpendq_t *)sq_remfirst(&g_sigpendingsignal);
leave_critical_section(flags);
/* Check if we got one. */
if (!sigpend)
{
/* No... Allocate the pending signal */
2020-11-27 10:43:20 +01:00
sigpend = (FAR sigpendq_t *)kmm_malloc((sizeof (sigpendq_t)));
/* Check if we got an allocated message */
if (sigpend)
{
sigpend->type = SIG_ALLOC_DYN;
}
}
}
return sigpend;
}
/****************************************************************************
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
* Name: nxsig_find_pendingsignal
*
* Description:
* Find a specified element in the pending signal list
*
****************************************************************************/
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
static FAR sigpendq_t *
nxsig_find_pendingsignal(FAR struct task_group_s *group, int signo)
{
FAR sigpendq_t *sigpend = NULL;
irqstate_t flags;
DEBUGASSERT(group != NULL);
/* Pending signals can be added from interrupt level. */
flags = enter_critical_section();
/* Search the list for a action pending on this signal */
for (sigpend = (FAR sigpendq_t *)group->tg_sigpendingq.head;
(sigpend && sigpend->info.si_signo != signo);
sigpend = sigpend->flink);
leave_critical_section(flags);
return sigpend;
}
/****************************************************************************
* Name: nxsig_dispatch_kernel_action
****************************************************************************/
static void nxsig_dispatch_kernel_action(FAR struct tcb_s *stcb,
FAR siginfo_t *info)
{
FAR struct task_group_s *group = stcb->group;
FAR sigactq_t *sigact;
sigact = nxsig_find_action(group, info->si_signo);
if (sigact && (sigact->act.sa_flags & SA_KERNELHAND))
{
info->si_user = sigact->act.sa_user;
(sigact->act.sa_sigaction)(info->si_signo, info, NULL);
}
}
/****************************************************************************
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
* Name: nxsig_add_pendingsignal
*
* Description:
2020-10-04 17:48:34 +02:00
* Add the specified signal to the signal pending list. NOTE: This
* function will queue only one entry for each pending signal. This
* was done intentionally so that a run-away sender cannot consume
* all of memory.
*
****************************************************************************/
static void nxsig_add_pendingsignal(FAR struct tcb_s *stcb,
FAR siginfo_t *info)
{
FAR struct task_group_s *group;
FAR sigpendq_t *sigpend;
irqstate_t flags;
DEBUGASSERT(stcb != NULL && stcb->group != NULL);
group = stcb->group;
/* Check if the signal is already pending for the group */
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
sigpend = nxsig_find_pendingsignal(group, info->si_signo);
if (sigpend != NULL)
{
/* The signal is already pending... retain only one copy */
memcpy(&sigpend->info, info, sizeof(siginfo_t));
}
/* No... There is nothing pending in the group for this signo */
else
{
/* Allocate a new pending signal entry */
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
sigpend = nxsig_alloc_pendingsignal();
if (sigpend != NULL)
{
/* Put the signal information into the allocated structure */
memcpy(&sigpend->info, info, sizeof(siginfo_t));
/* Add the structure to the group pending signal list */
flags = enter_critical_section();
sq_addlast((FAR sq_entry_t *)sigpend, &group->tg_sigpendingq);
leave_critical_section(flags);
nxsig_dispatch_kernel_action(stcb, &sigpend->info);
}
}
DEBUGASSERT(sigpend);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
* Name: nxsig_tcbdispatch
*
* Description:
* All signals received the task (whatever the source) go through this
2020-10-04 17:48:34 +02:00
* function to be processed. This function is responsible for:
*
* - Determining if the signal is blocked.
* - Queuing and dispatching signal actions
* - Unblocking tasks that are waiting for signals
* - Queuing pending signals.
*
* This function will deliver the signal to the task associated with
2020-10-04 17:48:34 +02:00
* the specified TCB. This function should *not* typically be used
* to dispatch signals since it will *not* follow the group signal
* deliver algorithms.
*
* Returned Value:
* Returns 0 (OK) on success or a negated errno value on failure.
*
****************************************************************************/
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
int nxsig_tcbdispatch(FAR struct tcb_s *stcb, siginfo_t *info)
{
FAR struct tcb_s *rtcb = this_task();
irqstate_t flags;
int masked;
int ret = OK;
sinfo("TCB=%p signo=%d code=%d value=%d mask=%08" PRIx32 "\n",
stcb, info->si_signo, info->si_code,
info->si_value.sival_int, stcb->sigprocmask);
2016-02-18 21:56:48 +01:00
DEBUGASSERT(stcb != NULL && info != NULL);
/* Don't actually send a signal for signo 0. */
if (info->si_signo == 0)
{
return OK;
}
/************************** MASKED SIGNAL ACTIONS *************************/
masked = nxsig_ismember(&stcb->sigprocmask, info->si_signo);
#ifdef CONFIG_LIB_SYSCALL
/* Check if the signal is masked OR if the signal is received while we are
* processing a system call -- in either case, it will be added to the
2020-10-04 17:48:34 +02:00
* list of pending signals. Unmasked user signal actions will be deferred
* while we process the system call.
*
* If a thread calls a blocking system call, the thread will still be
* unblocked when the signal occurs (see OTHER SIGNAL HANDLING below), but
* any associated user signal action will be deferred until the system
2020-10-04 17:48:34 +02:00
* call returns. For example, if the application calls sem_wait(), the
* following would occur:
*
* 1. System call entry logic will block user signal handling and call
* sem_wait() in kernel mode.
* 2. sem_wait() will block,
* 3. The receipt of the signal will cause any signal action to pend
* but will unblock sem_wait(),
* 4. The sem_wait() system call will awaken and return EINTR,
* 5. The pending signal action will occur after the sem_wait() system
* call returns to user mode.
*
* Syscall handlers (and logic-in-general within the OS) should not use
* signal handlers.
*/
if ((masked == 1) || (stcb->flags & TCB_FLAG_SYSCALL) != 0)
#else
2020-10-04 17:48:34 +02:00
/* Check if the signal is masked. In that case, it will be added to the
* list of pending signals.
*/
if (masked == 1)
#endif
{
2020-10-04 17:48:34 +02:00
/* Check if the task is waiting for this pending signal. If so, then
* unblock it. This must be performed in a critical section because
* signals can be queued from the interrupt level.
*/
flags = enter_critical_section();
if (stcb->task_state == TSTATE_WAIT_SIG &&
(masked == 0 ||
nxsig_ismember(&stcb->sigwaitmask, info->si_signo)))
{
memcpy(&stcb->sigunbinfo, info, sizeof(siginfo_t));
stcb->sigwaitmask = NULL_SIGNAL_SET;
if (WDOG_ISACTIVE(&stcb->waitdog))
{
wd_cancel(&stcb->waitdog);
}
/* Remove the task from waitting list */
dq_rem((FAR dq_entry_t *)stcb, &g_waitingforsignal);
/* Add the task to ready-to-run task list and
* perform the context switch if one is needed
*/
if (nxsched_add_readytorun(stcb))
{
up_switch_context(stcb, rtcb);
}
leave_critical_section(flags);
}
/* Its not one we are waiting for... Add it to the list of pending
* signals.
*/
else
{
leave_critical_section(flags);
nxsig_add_pendingsignal(stcb, info);
}
}
/************************* UNMASKED SIGNAL ACTIONS ************************/
else
{
/* Queue any sigaction's requested by this task. */
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
ret = nxsig_queue_action(stcb, info);
/* Deliver of the signal must be performed in a critical section */
flags = enter_critical_section();
2020-10-04 17:48:34 +02:00
/* Check if the task is waiting for an unmasked signal. If so, then
* unblock it. This must be performed in a critical section because
* signals can be queued from the interrupt level.
*/
if (stcb->task_state == TSTATE_WAIT_SIG)
{
memcpy(&stcb->sigunbinfo, info, sizeof(siginfo_t));
stcb->sigwaitmask = NULL_SIGNAL_SET;
if (WDOG_ISACTIVE(&stcb->waitdog))
{
wd_cancel(&stcb->waitdog);
}
/* Remove the task from waitting list */
dq_rem((FAR dq_entry_t *)stcb, &g_waitingforsignal);
/* Add the task to ready-to-run task list and
* perform the context switch if one is needed
*/
if (nxsched_add_readytorun(stcb))
{
up_switch_context(stcb, rtcb);
}
}
leave_critical_section(flags);
/* If the task neither was waiting for the signal nor had a signal
* handler attached to the signal, then the default action is
* simply to ignore the signal
*/
}
/************************* OTHER SIGNAL HANDLING **************************/
2020-10-04 17:48:34 +02:00
/* Performed only if the signal is unmasked. These actions also must
* happen within a system call.
*/
if (masked == 0)
{
flags = enter_critical_section();
/* If the task is blocked waiting for a semaphore, then that task must
* be unblocked when a signal is received.
*/
if (stcb->task_state == TSTATE_WAIT_SEM)
{
nxsem_wait_irq(stcb, EINTR);
}
#if !defined(CONFIG_DISABLE_MQUEUE) || !defined(CONFIG_DISABLE_MQUEUE_SYSV)
/* If the task is blocked waiting on a message queue, then that task
* must be unblocked when a signal is received.
*/
if (stcb->task_state == TSTATE_WAIT_MQNOTEMPTY ||
stcb->task_state == TSTATE_WAIT_MQNOTFULL)
{
nxmq_wait_irq(stcb, EINTR);
}
#endif
#ifdef CONFIG_SIG_SIGSTOP_ACTION
/* If the task was stopped by SIGSTOP or SIGTSTP, then unblock the task
* if SIGCONT is received.
*/
if (stcb->task_state == TSTATE_TASK_STOPPED &&
info->si_signo == SIGCONT)
{
#ifdef HAVE_GROUP_MEMBERS
group_continue(stcb);
#else
/* Remove the task from waitting list */
dq_rem((FAR dq_entry_t *)stcb, &g_stoppedtasks);
/* Add the task to ready-to-run task list and
* perform the context switch if one is needed
*/
if (nxsched_add_readytorun(stcb))
{
up_switch_context(stcb, rtcb);
}
#endif
}
#endif
leave_critical_section(flags);
}
/* In case nxsig_ismember failed due to an invalid signal number */
if (masked < 0)
{
ret = -EINVAL;
}
return ret;
}
/****************************************************************************
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
* Name: nxsig_dispatch
*
* Description:
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
* This is the front-end for nxsig_tcbdispatch that should be typically
2020-10-04 17:48:34 +02:00
* be used to dispatch a signal. If HAVE_GROUP_MEMBERS is defined,
* then function will follow the group signal delivery algorithms:
*
* This front-end does the following things before calling
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
* nxsig_tcbdispatch.
*
* With HAVE_GROUP_MEMBERS defined:
* - Get the TCB associated with the pid.
* - If the TCB was found, get the group from the TCB.
* - If the PID has already exited, lookup the group that that was
* started by this task.
* - Use the group to pick the TCB to receive the signal
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
* - Call nxsig_tcbdispatch with the TCB
*
* With HAVE_GROUP_MEMBERS *not* defined
* - Get the TCB associated with the pid.
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
* - Call nxsig_tcbdispatch with the TCB
*
* Returned Value:
* Returns 0 (OK) on success or a negated errno value on failure.
*
****************************************************************************/
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
int nxsig_dispatch(pid_t pid, FAR siginfo_t *info)
{
#ifdef HAVE_GROUP_MEMBERS
FAR struct tcb_s *stcb;
FAR struct task_group_s *group;
/* Get the TCB associated with the pid */
stcb = nxsched_get_tcb(pid);
2016-02-18 21:56:48 +01:00
if (stcb != NULL)
{
2020-10-04 17:48:34 +02:00
/* The task/thread associated with this PID is still active. Get its
* task group.
*/
group = stcb->group;
}
else
{
2020-10-04 17:48:34 +02:00
/* The task/thread associated with this PID has exited. In the normal
* usage model, the PID should correspond to the PID of the task that
2020-10-04 17:48:34 +02:00
* created the task group. Try looking it up.
*/
group = group_findbypid(pid);
}
/* Did we locate the group? */
2016-02-18 21:56:48 +01:00
if (group != NULL)
{
/* Yes.. call group_signal() to send the signal to the correct group
* member.
*/
return group_signal(group, info);
}
else
{
return -ESRCH;
}
#else
FAR struct tcb_s *stcb;
/* Get the TCB associated with the pid */
stcb = nxsched_get_tcb(pid);
2016-02-18 21:56:48 +01:00
if (stcb == NULL)
{
return -ESRCH;
}
This change renames all internal, private NuttX signal-related functions to use the prefix nxsig_ so that they cannot be confused with application interfaces that begin, primarily, with sig_ This is analogous to similar renaming that was done previously for semaphores. Squashed commit of the following: sched/signal: Fix a few compile warnings introduced by naming changes. sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix. sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces. sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces. sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces. sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces. sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces. sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces. sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
2017-10-05 21:25:25 +02:00
return nxsig_tcbdispatch(stcb, info);
#endif
}