sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
a2d924eea4
nuttx/syscall/syscall_lookup.h

396 lines
16 KiB
C
Raw Normal View History

Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/****************************************************************************
* syscall/syscall_lookup.h
*
syscall/: Remove support for CONFIG_FS_READABLE
2020-03-21 18:02:42 +01:00
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
*
syscall/: Remove support for CONFIG_FS_READABLE
2020-03-21 18:02:42 +01:00
* http://www.apache.org/licenses/LICENSE-2.0
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
*
syscall/: Remove support for CONFIG_FS_READABLE
2020-03-21 18:02:42 +01:00
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
*
****************************************************************************/
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* SYSCALL_LOOKUP must be defined before including this file.
*
* These first system calls are supported regardless of the NuttX
* configuration
*/
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP1(_exit, 1, STUB__exit)
SYSCALL_LOOKUP(exit, 1, STUB_exit)
SYSCALL_LOOKUP(get_errno, 0, STUB_get_errno)
SYSCALL_LOOKUP(getpid, 0, STUB_getpid)
sched/sched/sched_getcpu.c: Implement non-standard interface. If SMP is enabled this function will return the number of the CPU that the thread is running on. This is non-standard but follows GLIBC if __GNU_SOURCE is enabled. The returned CPU number is, however, worthless since it returns the CPU number of the CPU that was executing the task when the function was called. The application can never know the true CPU number of the CPU tht it is running on since that value is volatile and change change at any time.
2020-01-31 21:25:15 +01:00
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(sched_getparam, 2, STUB_sched_getparam)
SYSCALL_LOOKUP(sched_getscheduler, 1, STUB_sched_getscheduler)
SYSCALL_LOOKUP(sched_lock, 0, STUB_sched_lock)
SYSCALL_LOOKUP(sched_lockcount, 0, STUB_sched_lockcount)
SYSCALL_LOOKUP(sched_rr_get_interval, 2, STUB_sched_rr_get_interval)
SYSCALL_LOOKUP(sched_setparam, 2, STUB_sched_setparam)
SYSCALL_LOOKUP(sched_setscheduler, 3, STUB_sched_setscheduler)
SYSCALL_LOOKUP(sched_unlock, 0, STUB_sched_unlock)
SYSCALL_LOOKUP(sched_yield, 0, STUB_sched_yield)
sched/sched: Add sched_get_stackinfo() The new OS interface, sched_get_stackinfo() combines two pthread-specific interfaces into a single generic interface. The existing pthread_get_stackaddr_np() and pthread_get_stacksize_np() are moved from sched/pthread to libs/libc/pthread. There are two motivations for this change: First, it reduces the number of system calls. Secondly, it adds a common hook that is going to used for a future implementation of TLS.
2020-05-03 22:16:36 +02:00
SYSCALL_LOOKUP(sched_get_stackinfo, 2, STUB_sched_get_stackinfo)
syscall: Expose sched_getaffinity and sched_setaffinity
2020-02-09 08:38:50 +01:00
sched/sched/sched_getcpu.c: Implement non-standard interface. If SMP is enabled this function will return the number of the CPU that the thread is running on. This is non-standard but follows GLIBC if __GNU_SOURCE is enabled. The returned CPU number is, however, worthless since it returns the CPU number of the CPU that was executing the task when the function was called. The application can never know the true CPU number of the CPU tht it is running on since that value is volatile and change change at any time.
2020-01-31 21:25:15 +01:00
#ifdef CONFIG_SMP
syscall: Expose sched_getaffinity and sched_setaffinity
2020-02-09 08:38:50 +01:00
SYSCALL_LOOKUP(sched_getaffinity, 3, STUB_sched_getaffinity)
sched/sched/sched_getcpu.c: Implement non-standard interface. If SMP is enabled this function will return the number of the CPU that the thread is running on. This is non-standard but follows GLIBC if __GNU_SOURCE is enabled. The returned CPU number is, however, worthless since it returns the CPU number of the CPU that was executing the task when the function was called. The application can never know the true CPU number of the CPU tht it is running on since that value is volatile and change change at any time.
2020-01-31 21:25:15 +01:00
SYSCALL_LOOKUP(sched_getcpu, 0, STUB_sched_getcpu)
syscall: Expose sched_getaffinity and sched_setaffinity
2020-02-09 08:38:50 +01:00
SYSCALL_LOOKUP(sched_setaffinity, 3, STUB_sched_setaffinity)
sched/sched/sched_getcpu.c: Implement non-standard interface. If SMP is enabled this function will return the number of the CPU that the thread is running on. This is non-standard but follows GLIBC if __GNU_SOURCE is enabled. The returned CPU number is, however, worthless since it returns the CPU number of the CPU that was executing the task when the function was called. The application can never know the true CPU number of the CPU tht it is running on since that value is volatile and change change at any time.
2020-01-31 21:25:15 +01:00
#endif
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(set_errno, 1, STUB_set_errno)
SYSCALL_LOOKUP(uname, 1, STUB_uname)
Create a build structure that will (eventually) support using the VFS to manage named semaphores
2014-09-28 20:19:01 +02:00
sched/group and syscall/: Implement 'real' setuid, getuid, setgid, and getgid interfaces. These will be inheritance by all child task groups.
2019-08-06 22:13:43 +02:00
/* User identity */
#ifdef CONFIG_SCHED_USER_IDENTITY
SYSCALL_LOOKUP(setuid, 1, STUB_setuid)
SYSCALL_LOOKUP(getuid, 0, STUB_getuid)
SYSCALL_LOOKUP(setgid, 1, STUB_setgid)
SYSCALL_LOOKUP(getgid, 0, STUB_getgid)
#endif
Create a build structure that will (eventually) support using the VFS to manage named semaphores
2014-09-28 20:19:01 +02:00
/* Semaphores */
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(sem_destroy, 1, STUB_sem_destroy)
SYSCALL_LOOKUP(sem_post, 1, STUB_sem_post)
SYSCALL_LOOKUP(sem_timedwait, 2, STUB_sem_timedwait)
SYSCALL_LOOKUP(sem_trywait, 1, STUB_sem_trywait)
SYSCALL_LOOKUP(sem_wait, 1, STUB_sem_wait)
Create a build structure that will (eventually) support using the VFS to manage named semaphores
2014-09-28 20:19:01 +02:00
Add pthread_mutexattr_get/set_protocol and non-standard sem_get/set_protocol. These may use to enable or disable priority inheritance on a single semaphore.
2016-11-02 16:05:18 +01:00
#ifdef CONFIG_PRIORITY_INHERITANCE
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(sem_setprotocol, 2, STUB_sem_setprotocol)
Add pthread_mutexattr_get/set_protocol and non-standard sem_get/set_protocol. These may use to enable or disable priority inheritance on a single semaphore.
2016-11-02 16:05:18 +01:00
#endif
Create a build structure that will (eventually) support using the VFS to manage named semaphores
2014-09-28 20:19:01 +02:00
/* Named semaphores */
Fix conditional compilation error introduced with the named semaphore changes
2014-09-29 15:54:45 +02:00
#ifdef CONFIG_FS_NAMED_SEMAPHORES
Improve proxy/stub parameter passing for variadic OS interfaces. In the past a very low effort interface was used: - All parmeters were treated as though they were type uinptr_t, and - The maximum number of parmeters (6) was passed in all cases. The first is potentially wrong and the second is very inefficient. This commit improves this by: - Making tools/mksyscall.c more intelligent, and - Extending the syntax for variadic functions. For example, in syscall.cvs, the open() API was represened like this: "open","fcntl.h","","int","const char*","int","..." In reality, open may take only a single optional argument of type mode_t which is not the same size as uintptr_t. And there is not reason to pass 6 parameters in that case. And this has been extended to: "open","fcntl.h","","int","const char*","int","...","mode_t" The existence of the "mode_t" tells tools/mksyscall that there is at most one optional parameter and, if present, it is of type mode_t.
2020-05-05 23:02:07 +02:00
SYSCALL_LOOKUP(sem_open, 4, STUB_sem_open)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(sem_close, 1, STUB_sem_close)
SYSCALL_LOOKUP(sem_unlink, 1, STUB_sem_unlink)
Create a build structure that will (eventually) support using the VFS to manage named semaphores
2014-09-28 20:19:01 +02:00
#endif
First round of changes to get the ELF configuration building again
2014-09-16 23:37:05 +02:00
#ifndef CONFIG_BUILD_KERNEL
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(task_create, 5, STUB_task_create)
syscall: nx_task_spawn should exist in the flat build just like the protected build Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-02 12:36:48 +02:00
#ifdef CONFIG_LIB_SYSCALL
Squashed commit of the following: task_spawn() and posix_spawn() are NuttX OS interfaces. In PROTECTED and KERNEL build modes, then can be reached from applications only via a system call. Currently, the number of parameters in a system call is limited to six; these spawn function have seven parameters. Rather than extend the maximum number of parameters across all architectures, I opted instead to marshal the seven parameters into a structure. * In order to support builtin in function in protected mode, a task_spawn() system call must be supported. Unfortunately this is overly complex because there is a (soft) limit of 6 parameters in a system call; task_spawn has seven paramters. This is a soft limit but still difficult to extend because it involves assembly language changes to numerous architectures. Better to get more creative.
2019-08-23 21:20:52 +02:00
SYSCALL_LOOKUP(nx_task_spawn, 1, STUB_nx_task_spawn)
syscall/ and related: Fix an error found in build testing. Inconsistent conditional compilation led to link errors in certain configurations.
2019-08-28 00:41:07 +02:00
#endif
First round of changes to get the ELF configuration building again
2014-09-16 23:37:05 +02:00
#else
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(pgalloc, 2, STUB_pgalloc)
Can't used task_create() if address environments enabled
2014-08-27 22:19:41 +02:00
#endif
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(task_delete, 1, STUB_task_delete)
SYSCALL_LOOKUP(task_restart, 1, STUB_task_restart)
SYSCALL_LOOKUP(task_setcancelstate, 2, STUB_task_setcancelstate)
SYSCALL_LOOKUP(up_assert, 2, STUB_up_assert)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
Add task_setcanceltype()
2016-12-10 23:06:14 +01:00
# ifdef CONFIG_CANCELLATION_POINTS
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(task_setcanceltype, 2, STUB_task_setcanceltype)
SYSCALL_LOOKUP(task_testcancel, 0, STUB_task_testcancel)
Add task_setcanceltype()
2016-12-10 23:06:14 +01:00
# endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following can be individually enabled */
syscall/: Adapt the conditional compile logic on when to include the vfork() syscall proxy and stub to the logic used for vfork() itself.
2019-07-10 15:25:00 +02:00
#if defined(CONFIG_SCHED_WAITPID) && defined(CONFIG_ARCH_HAVE_VFORK)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(vfork, 0, STUB_vfork)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
#ifdef CONFIG_SCHED_ATEXIT
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(atexit, 1, STUB_atexit)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
#ifdef CONFIG_SCHED_ONEXIT
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(on_exit, 2, STUB_on_exit)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
#ifdef CONFIG_SCHED_WAITPID
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(waitpid, 3, STUB_waitpid)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
# ifdef CONFIG_SCHED_HAVE_PARENT
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(wait, 1, STUB_wait)
SYSCALL_LOOKUP(waitid, 4, STUB_waitid)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
# endif
#endif
Add syscall support for insmod and rmmod
2015-12-12 18:11:09 +01:00
/* The following can only be defined if we are configured to load
* OS modules from a file system.
*/
#ifdef CONFIG_MODULE
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(insmod, 2, STUB_insmod)
SYSCALL_LOOKUP(rmmod, 1, STUB_rmmod)
SYSCALL_LOOKUP(modhandle, 1, STUB_modhandle)
Add syscall support for insmod and rmmod
2015-12-12 18:11:09 +01:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following can only be defined if we are configured to execute
* programs from a file system.
*/
syscall/: The non-standard interface exec() is now enshrined as a official NuttX API. I really dislike doing this but I think that this is probably the only want to load programs in the protected mode. It is currently used by some example code under apps/ that generate their own symbol tables for linking. Other file execution APIs relay on a symbol table provided by the OS. In the protected mode, the OS cannot provide any meaning symbol table for execution of code in the user-space blob so that is they exec() is really needed in that build case. And, finally, the interface is completely useless and will not be supported in the KERNEL build mode where the contrary is true: An application process cannot provide any meaning symbolic information for use in linking a different process.
2017-10-03 15:09:35 +02:00
#ifndef CONFIG_BINFMT_DISABLE
#ifndef CONFIG_BUILD_KERNEL
SYSCALL_LOOKUP(exec, 4, STUB_exec)
#endif
#ifdef CONFIG_LIBC_EXECFUNCS
binfmt/ and libs/libc: Make exepath_*() more common: 1. Move exepath_*() related code to libc/misc 1. Rename exepath_ to envpath_ 2. Rename BINFMT_EXEPATH to LIB_ENVPATH libs/libc/modlib: Add pre module library symbol table support
2018-11-08 14:27:14 +01:00
#ifdef CONFIG_LIB_ENVPATH
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(posix_spawnp, 6, STUB_posix_spawnp)
syscall/: The non-standard interface exec() is now enshrined as a official NuttX API. I really dislike doing this but I think that this is probably the only want to load programs in the protected mode. It is currently used by some example code under apps/ that generate their own symbol tables for linking. Other file execution APIs relay on a symbol table provided by the OS. In the protected mode, the OS cannot provide any meaning symbol table for execution of code in the user-space blob so that is they exec() is really needed in that build case. And, finally, the interface is completely useless and will not be supported in the KERNEL build mode where the contrary is true: An application process cannot provide any meaning symbolic information for use in linking a different process.
2017-10-03 15:09:35 +02:00
#else
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(posix_spawn, 6, STUB_posix_spawn)
syscall/: The non-standard interface exec() is now enshrined as a official NuttX API. I really dislike doing this but I think that this is probably the only want to load programs in the protected mode. It is currently used by some example code under apps/ that generate their own symbol tables for linking. Other file execution APIs relay on a symbol table provided by the OS. In the protected mode, the OS cannot provide any meaning symbol table for execution of code in the user-space blob so that is they exec() is really needed in that build case. And, finally, the interface is completely useless and will not be supported in the KERNEL build mode where the contrary is true: An application process cannot provide any meaning symbolic information for use in linking a different process.
2017-10-03 15:09:35 +02:00
#endif
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(execv, 2, STUB_execv)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
syscall/: The non-standard interface exec() is now enshrined as a official NuttX API. I really dislike doing this but I think that this is probably the only want to load programs in the protected mode. It is currently used by some example code under apps/ that generate their own symbol tables for linking. Other file execution APIs relay on a symbol table provided by the OS. In the protected mode, the OS cannot provide any meaning symbol table for execution of code in the user-space blob so that is they exec() is really needed in that build case. And, finally, the interface is completely useless and will not be supported in the KERNEL build mode where the contrary is true: An application process cannot provide any meaning symbolic information for use in linking a different process.
2017-10-03 15:09:35 +02:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following are only defined is signals are supported in the NuttX
* configuration.
*/
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(kill, 2, STUB_kill)
SYSCALL_LOOKUP(sigaction, 3, STUB_sigaction)
SYSCALL_LOOKUP(sigpending, 1, STUB_sigpending)
SYSCALL_LOOKUP(sigprocmask, 3, STUB_sigprocmask)
SYSCALL_LOOKUP(sigqueue, 3, STUB_sigqueue)
SYSCALL_LOOKUP(sigsuspend, 1, STUB_sigsuspend)
SYSCALL_LOOKUP(sigtimedwait, 3, STUB_sigtimedwait)
SYSCALL_LOOKUP(sigwaitinfo, 2, STUB_sigwaitinfo)
sched/signal/sig_nanosleep.c and libc/time/lib_nanosleep.c: Implement clock_nanosleep(). nanosleep() is now reduced to a libc wrapper around clock_nanosleep().
2017-11-12 00:44:59 +01:00
SYSCALL_LOOKUP(clock_nanosleep, 4, STUB_clock_nanosleep)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following are only defined if the system clock is enabled in the
* NuttX configuration.
*/
syscall: clock_systimer() is no longer a system call. It has been replaced with the equivalent, standard interface clock() as the system call. sched/clock: Move the implementation of clock() from libs/libc/time to sched/clock. This is necessary because it calls the (now) internal OS function clock_systimer. clock() is now accessed only via a system call in certain configuratins. libs/libc/wqueue: Replace calls to clock_systimer() with calls to the equivalent clock().
2018-06-16 20:50:28 +02:00
SYSCALL_LOOKUP(syscall_clock, 0, STUB_clock)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(clock_getres, 2, STUB_clock_getres)
SYSCALL_LOOKUP(clock_gettime, 2, STUB_clock_gettime)
SYSCALL_LOOKUP(clock_settime, 2, STUB_clock_settime)
Rename CONFIG_SCHED_TIMEKEEPING to CONFIG_CLOCK_TIMEKEEPING. That is a better compartmentalized name.
2016-07-11 14:54:02 +02:00
#ifdef CONFIG_CLOCK_TIMEKEEPING
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(adjtime, 2, STUB_adjtime)
Add support for adjtime system call
2016-07-11 00:55:32 +02:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following are defined only if POSIX timers are supported */
#ifndef CONFIG_DISABLE_POSIX_TIMERS
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(timer_create, 3, STUB_timer_create)
SYSCALL_LOOKUP(timer_delete, 1, STUB_timer_delete)
SYSCALL_LOOKUP(timer_getoverrun, 1, STUB_timer_getoverrun)
SYSCALL_LOOKUP(timer_gettime, 2, STUB_timer_gettime)
SYSCALL_LOOKUP(timer_settime, 4, STUB_timer_settime)
syscall/ and include/sys/syscall.h: Fix an inconsistency. In someplaces, getitimer() and setitimer() depend on CONFIG_DISABLE_POSIX_TIMERS=n and in other places they depend on nothing. As a result, there are link failures when CONFIG_DISABLE_POSIX_TIMERS=y. Which is correct? On one hand, these interfaces are not POSIX timers, so conditioning them on on CONFIG_DISABLE_POSIX_TIMERS. I opted to keep the dependence and just apply it consistently. I did this because setitimer() and getitimer() are seldom used so it is really best if a system call is no generated for them in all cases.
2019-11-14 22:10:04 +01:00
SYSCALL_LOOKUP(getitimer, 2, STUB_getitimer)
SYSCALL_LOOKUP(setitimer, 3, STUB_setitimer)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
vsyslog is now a system call
2016-06-19 15:03:44 +02:00
/* System logging */
Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required.
2018-03-04 15:07:07 +01:00
SYSCALL_LOOKUP(nx_vsyslog, 3, STUB_nx_vsyslog)
vsyslog is now a system call
2016-06-19 15:03:44 +02:00
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following are defined if either file or socket descriptor are
* enabled.
*/
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(close, 1, STUB_close)
Improve proxy/stub parameter passing for variadic OS interfaces. In the past a very low effort interface was used: - All parmeters were treated as though they were type uinptr_t, and - The maximum number of parmeters (6) was passed in all cases. The first is potentially wrong and the second is very inefficient. This commit improves this by: - Making tools/mksyscall.c more intelligent, and - Extending the syntax for variadic functions. For example, in syscall.cvs, the open() API was represened like this: "open","fcntl.h","","int","const char*","int","..." In reality, open may take only a single optional argument of type mode_t which is not the same size as uintptr_t. And there is not reason to pass 6 parameters in that case. And this has been extended to: "open","fcntl.h","","int","const char*","int","...","mode_t" The existence of the "mode_t" tells tools/mksyscall that there is at most one optional parameter and, if present, it is of type mode_t.
2020-05-05 23:02:07 +02:00
SYSCALL_LOOKUP(ioctl, 3, STUB_ioctl)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(read, 3, STUB_read)
SYSCALL_LOOKUP(write, 3, STUB_write)
SYSCALL_LOOKUP(pread, 4, STUB_pread)
SYSCALL_LOOKUP(pwrite, 4, STUB_pwrite)
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#ifdef CONFIG_FS_AIO
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(aio_read, 1, STUB_aio_read)
SYSCALL_LOOKUP(aio_write, 1, STUB_aio_write)
SYSCALL_LOOKUP(aio_fsync, 2, STUB_aio_fsync)
SYSCALL_LOOKUP(aio_cancel, 2, STUB_aio_cancel)
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#endif
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(poll, 3, STUB_poll)
SYSCALL_LOOKUP(select, 5, STUB_select)
sched/signal and syscall/: Add support for pselect() and ppoll() functions
2018-11-08 14:45:23 +01:00
SYSCALL_LOOKUP(ppoll, 4, STUB_ppoll)
SYSCALL_LOOKUP(pselect, 6, STUB_pselect)
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#ifdef CONFIG_NETDEV_IFINDEX
Squashed commit of the following: syscalls/: Add syscall support for if_nametoindex() and if_indextoname() net/: Update some comments.
2018-06-25 20:41:28 +02:00
SYSCALL_LOOKUP(if_indextoname, 2, STUB_if_indextoname)
SYSCALL_LOOKUP(if_nametoindex, 1, STUB_if_nametoindex)
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#endif
#ifdef CONFIG_SERIAL_TERMIOS
drivers/serial/tcdrain: tcdrain() was recently added to the NuttX C library. But there is a problem. The specification of tcdrain() requires that it be a cancellation point. In order to do this, tcdrain was moved from the C library into the OS and the addition cancellation point hooks were added. In non-FLAT builds, access via system calls is also now supported.
2017-10-06 18:55:36 +02:00
SYSCALL_LOOKUP(tcdrain, 1, STUB_tcdrain)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
boardctl(): Add a new non-standard OS interface. This is similar to a driver IOCTL call. But this is an IOCTL call directly on the board logic. This function will eventually replace all of the ad hoc OS interfaces that are current used to perform application specific intialiation and application driver test confifuration. It essentially formalizes and institutionalizes these rogue interface in to at least a single crazy call.
2015-03-31 19:25:52 +02:00
/* Board support */
#ifdef CONFIG_LIB_BOARDCTL
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(boardctl, 2, STUB_boardctl)
boardctl(): Add a new non-standard OS interface. This is similar to a driver IOCTL call. But this is an IOCTL call directly on the board logic. This function will eventually replace all of the ad hoc OS interfaces that are current used to perform application specific intialiation and application driver test confifuration. It essentially formalizes and institutionalizes these rogue interface in to at least a single crazy call.
2015-03-31 19:25:52 +02:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following are defined if file descriptors are enabled */
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(closedir, 1, STUB_closedir)
SYSCALL_LOOKUP(dup, 1, STUB_dup)
SYSCALL_LOOKUP(dup2, 2, STUB_dup2)
syscall: Apply the new vararg syntax to fcntl Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 17:36:16 +02:00
SYSCALL_LOOKUP(fcntl, 3, STUB_fcntl)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(lseek, 3, STUB_lseek)
SYSCALL_LOOKUP(mmap, 6, STUB_mmap)
Improve proxy/stub parameter passing for variadic OS interfaces. In the past a very low effort interface was used: - All parmeters were treated as though they were type uinptr_t, and - The maximum number of parmeters (6) was passed in all cases. The first is potentially wrong and the second is very inefficient. This commit improves this by: - Making tools/mksyscall.c more intelligent, and - Extending the syntax for variadic functions. For example, in syscall.cvs, the open() API was represened like this: "open","fcntl.h","","int","const char*","int","..." In reality, open may take only a single optional argument of type mode_t which is not the same size as uintptr_t. And there is not reason to pass 6 parameters in that case. And this has been extended to: "open","fcntl.h","","int","const char*","int","...","mode_t" The existence of the "mode_t" tells tools/mksyscall that there is at most one optional parameter and, if present, it is of type mode_t.
2020-05-05 23:02:07 +02:00
SYSCALL_LOOKUP(open, 3, STUB_open)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(opendir, 1, STUB_opendir)
SYSCALL_LOOKUP(readdir, 1, STUB_readdir)
SYSCALL_LOOKUP(rewinddir, 1, STUB_rewinddir)
SYSCALL_LOOKUP(seekdir, 2, STUB_seekdir)
SYSCALL_LOOKUP(stat, 2, STUB_stat)
SYSCALL_LOOKUP(fstat, 2, STUB_fstat)
SYSCALL_LOOKUP(statfs, 2, STUB_statfs)
SYSCALL_LOOKUP(fstatfs, 2, STUB_fstatfs)
SYSCALL_LOOKUP(telldir, 1, STUB_telldir)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
syscall/syscall.csv: Correct an error in creating the munmap() proxy if CONFIG_FS_RAMMAP is not defined.
2019-04-05 04:37:32 +02:00
#if defined(CONFIG_FS_RAMMAP)
SYSCALL_LOOKUP(munmap, 2, STUB_munmap)
#endif
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#if defined(CONFIG_PSEUDOFS_SOFTLINKS)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(link, 2, STUB_link)
SYSCALL_LOOKUP(readlink, 3, STUB_readlink)
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#endif
Soft links: Update Documentation, rename file, add system calls
2017-02-03 00:11:08 +01:00
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#if defined(CONFIG_PIPES) && CONFIG_DEV_PIPE_SIZE > 0
Rename pipe2/mkfifo2 to nx_pipe/nx_mkfifo and don't modify errno anymore Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-04 08:49:38 +02:00
SYSCALL_LOOKUP(nx_pipe, 2, STUB_nx_pipe)
SYSCALL_LOOKUP(nx_mkfifo, 3, STUB_nx_mkfifo)
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#endif
Fix pipe2() and mkfifo2() syscall logic
2016-07-20 23:26:54 +02:00
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#if CONFIG_NFILE_STREAMS > 0
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(fdopen, 3, STUB_fs_fdopen)
SYSCALL_LOOKUP(sched_getstreams, 0, STUB_sched_getstreams)
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#endif
Optimized sendfile() from Max Holtzberg
2013-09-28 22:47:49 +02:00
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#if defined(CONFIG_NET_SENDFILE)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(sendfile, 4, STUB_fs_sendifile)
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#if !defined(CONFIG_DISABLE_MOUNTPOINT)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(mount, 5, STUB_mount)
SYSCALL_LOOKUP(fsync, 1, STUB_fsync)
Squashed commit of the following: fs: Add truncate() support for userfs fs/unionfs: Add truncate() support to the unionfs fs/tmpfs: Add ftruncate() support to tmpfs syscall/: Add system call support for ftruncate() net/route: Adding ftruncate() support eliminates an issue in file-based routing table management. fs: Add basic framework to support truncate() and ftruncate(). The infrastructure is complete. Now, however, the actual implementation of ftruncate() will have to be done for each file system.
2018-01-03 23:03:56 +01:00
SYSCALL_LOOKUP(ftruncate, 2, STUB_ftruncate)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(mkdir, 2, STUB_mkdir)
SYSCALL_LOOKUP(rename, 2, STUB_rename)
SYSCALL_LOOKUP(rmdir, 1, STUB_rmdir)
SYSCALL_LOOKUP(umount2, 2, STUB_umount2)
SYSCALL_LOOKUP(unlink, 1, STUB_unlink)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
Add system calls for shared memory interfaces
2014-09-22 23:24:09 +02:00
/* Shared memory interfaces */
#ifdef CONFIG_MM_SHM
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(shmget, 3, STUB_shmget)
SYSCALL_LOOKUP(shmat, 3, STUB_shmat)
SYSCALL_LOOKUP(shmctl, 3, STUB_shmctl)
SYSCALL_LOOKUP(shmdt, 1, STUB_shmdt)
Add system calls for shared memory interfaces
2014-09-22 23:24:09 +02:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following are defined if pthreads are enabled */
#ifndef CONFIG_DISABLE_PTHREAD
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(pthread_cancel, 1, STUB_pthread_cancel)
SYSCALL_LOOKUP(pthread_cond_broadcast, 1, STUB_pthread_cond_broadcast)
SYSCALL_LOOKUP(pthread_cond_signal, 1, STUB_pthread_cond_signal)
SYSCALL_LOOKUP(pthread_cond_wait, 2, STUB_pthread_cond_wait)
SYSCALL_LOOKUP(pthread_create, 4, STUB_pthread_create)
SYSCALL_LOOKUP(pthread_detach, 1, STUB_pthread_detach)
SYSCALL_LOOKUP(pthread_exit, 1, STUB_pthread_exit)
SYSCALL_LOOKUP(pthread_getschedparam, 3, STUB_pthread_getschedparam)
SYSCALL_LOOKUP(pthread_getspecific, 1, STUB_pthread_getspecific)
SYSCALL_LOOKUP(pthread_join, 2, STUB_pthread_join)
SYSCALL_LOOKUP(pthread_key_create, 2, STUB_pthread_key_create)
SYSCALL_LOOKUP(pthread_key_delete, 1, STUB_pthread_key_delete)
SYSCALL_LOOKUP(pthread_mutex_destroy, 1, STUB_pthread_mutex_destroy)
SYSCALL_LOOKUP(pthread_mutex_init, 2, STUB_pthread_mutex_init)
libs/libc/pthread, syscall/, and include/sys/syscall.h: Support for pthread_mutex_timedlock() was added recently, however no new system call was added for the API make is usable only in the FLAT build. With a pthread_mutex_timedlock() system call, there is no reason for a pthread_mutex_lock() system call since it is now nothing more than an wrapper around pthread_mutex_timedlock(), passing NULL for the time value. The pthread_mutex_lock() syscall was removed and the pthread_mutex_lock() implemented was moved from /sched/pthread to where it now belows in libs/libc/pthread.
2019-02-26 01:19:13 +01:00
SYSCALL_LOOKUP(pthread_mutex_timedlock, 2, STUB_pthread_mutex_timedlock)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(pthread_mutex_trylock, 1, STUB_pthread_mutex_trylock)
SYSCALL_LOOKUP(pthread_mutex_unlock, 1, STUB_pthread_mutex_unlock)
#ifndef CONFIG_PTHREAD_MUTEX_UNSAFE
Parts of last syscall commit that were omitted.
2017-03-27 17:38:27 +02:00
SYSCALL_LOOKUP(pthread_mutex_consistent, 1, STUB_pthread_mutex_consistent)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
#endif
SYSCALL_LOOKUP(pthread_setschedparam, 3, STUB_pthread_setschedparam)
SYSCALL_LOOKUP(pthread_setschedprio, 2, STUB_pthread_setschedprio)
SYSCALL_LOOKUP(pthread_setspecific, 2, STUB_pthread_setspecific)
Squashed commit of the following: libs/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. syscall/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. wireless/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. Documentation/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. include/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. drivers/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. sched/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. configs: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/xtensa: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/z80: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/x86: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/renesas and arch/risc-v: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/or1k: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/misoc: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/mips: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/avr: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/arm: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
2019-04-29 22:52:05 +02:00
#ifdef CONFIG_SMP
Fix syscall lookup table
2020-05-07 09:25:18 +02:00
SYSCALL_LOOKUP(pthread_setaffinity_np, 3, STUB_pthread_setaffinity_np)
SYSCALL_LOOKUP(pthread_getaffinity_np, 3, STUB_pthread_getaffinity_np)
Squashed commit of the following: libs/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. syscall/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. wireless/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. Documentation/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. include/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. drivers/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. sched/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. configs: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/xtensa: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/z80: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/x86: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/renesas and arch/risc-v: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/or1k: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/misoc: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/mips: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/avr: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/arm: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
2019-04-29 22:52:05 +02:00
#endif
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(pthread_cond_timedwait, 3, STUB_pthread_cond_timedwait)
SYSCALL_LOOKUP(pthread_kill, 2, STUB_pthread_kill)
SYSCALL_LOOKUP(pthread_sigmask, 3, STUB_pthread_sigmask)
Squashed commit of the following: libs/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. syscall/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. wireless/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. Documentation/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. include/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. drivers/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. sched/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. configs: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/xtensa: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/z80: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/x86: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/renesas and arch/risc-v: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/or1k: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/misoc: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/mips: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/avr: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/arm: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
2019-04-29 22:52:05 +02:00
#ifdef CONFIG_PTHREAD_CLEANUP
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(pthread_cleanup_push, 2, STUB_pthread_cleanup_push)
SYSCALL_LOOKUP(pthread_cleanup_pop, 1, STUB_pthread_cleanup_pop)
Squashed commit of the following: libs/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. syscall/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. wireless/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. Documentation/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. include/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. drivers/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. sched/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. configs: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/xtensa: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/z80: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/x86: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/renesas and arch/risc-v: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/or1k: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/misoc: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/mips: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/avr: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/arm: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
2019-04-29 22:52:05 +02:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
/* The following are defined only if message queues are enabled */
#ifndef CONFIG_DISABLE_MQUEUE
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(mq_close, 1, STUB_mq_close)
SYSCALL_LOOKUP(mq_getattr, 2, STUB_mq_getattr)
SYSCALL_LOOKUP(mq_notify, 2, STUB_mq_notify)
Improve proxy/stub parameter passing for variadic OS interfaces. In the past a very low effort interface was used: - All parmeters were treated as though they were type uinptr_t, and - The maximum number of parmeters (6) was passed in all cases. The first is potentially wrong and the second is very inefficient. This commit improves this by: - Making tools/mksyscall.c more intelligent, and - Extending the syntax for variadic functions. For example, in syscall.cvs, the open() API was represened like this: "open","fcntl.h","","int","const char*","int","..." In reality, open may take only a single optional argument of type mode_t which is not the same size as uintptr_t. And there is not reason to pass 6 parameters in that case. And this has been extended to: "open","fcntl.h","","int","const char*","int","...","mode_t" The existence of the "mode_t" tells tools/mksyscall that there is at most one optional parameter and, if present, it is of type mode_t.
2020-05-05 23:02:07 +02:00
SYSCALL_LOOKUP(mq_open, 4, STUB_mq_open)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(mq_receive, 4, STUB_mq_receive)
SYSCALL_LOOKUP(mq_send, 4, STUB_mq_send)
SYSCALL_LOOKUP(mq_setattr, 3, STUB_mq_setattr)
SYSCALL_LOOKUP(mq_timedreceive, 5, STUB_mq_timedreceive)
SYSCALL_LOOKUP(mq_timedsend, 5, STUB_mq_timedsend)
SYSCALL_LOOKUP(mq_unlink, 1, STUB_mq_unlink)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
/* The following are defined only if environment variables are supported */
#ifndef CONFIG_DISABLE_ENVIRON
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(clearenv, 0, STUB_clearenv)
SYSCALL_LOOKUP(getenv, 1, STUB_getenv)
SYSCALL_LOOKUP(putenv, 1, STUB_putenv)
SYSCALL_LOOKUP(setenv, 3, STUB_setenv)
SYSCALL_LOOKUP(unsetenv, 1, STUB_unsetenv)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
Clean up some syscall logic that has changed due to revised netdb configuration
2015-07-10 23:41:20 +02:00
/* The following are defined only if netdb is supported */
Add system calls for gethostname and sethostname
2015-07-05 16:40:56 +02:00
Clean up some syscall logic that has changed due to revised netdb configuration
2015-07-10 23:41:20 +02:00
#ifdef CONFIG_LIBC_NETDB
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(sethostname, 2, STUB_sethostname)
Clean up some syscall logic that has changed due to revised netdb configuration
2015-07-10 23:41:20 +02:00
#endif
Add system calls for gethostname and sethostname
2015-07-05 16:40:56 +02:00
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following are defined only if networking AND sockets are supported */
syscall/syscall_lookup.h: Fix a newly introduced warning found in build testing.
2019-02-12 01:08:49 +01:00
#ifdef CONFIG_NET
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(accept, 3, STUB_accept)
SYSCALL_LOOKUP(bind, 3, STUB_bind)
SYSCALL_LOOKUP(connect, 3, STUB_connect)
syscall/: Add support for getpeername() and get_sockname() system calls.
2018-07-19 15:30:01 +02:00
SYSCALL_LOOKUP(getpeername, 3, STUB_getpeername)
SYSCALL_LOOKUP(getsockname, 3, STUB_getsockname)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
SYSCALL_LOOKUP(getsockopt, 5, STUB_getsockopt)
SYSCALL_LOOKUP(listen, 2, STUB_listen)
SYSCALL_LOOKUP(recv, 4, STUB_recv)
SYSCALL_LOOKUP(recvfrom, 6, STUB_recvfrom)
SYSCALL_LOOKUP(send, 4, STUB_send)
SYSCALL_LOOKUP(sendto, 6, STUB_sendto)
SYSCALL_LOOKUP(setsockopt, 5, STUB_setsockopt)
SYSCALL_LOOKUP(socket, 3, STUB_socket)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
/* The following is defined only if CONFIG_TASK_NAME_SIZE > 0 */
#if CONFIG_TASK_NAME_SIZE > 0
Improve proxy/stub parameter passing for variadic OS interfaces. In the past a very low effort interface was used: - All parmeters were treated as though they were type uinptr_t, and - The maximum number of parmeters (6) was passed in all cases. The first is potentially wrong and the second is very inefficient. This commit improves this by: - Making tools/mksyscall.c more intelligent, and - Extending the syntax for variadic functions. For example, in syscall.cvs, the open() API was represened like this: "open","fcntl.h","","int","const char*","int","..." In reality, open may take only a single optional argument of type mode_t which is not the same size as uintptr_t. And there is not reason to pass 6 parameters in that case. And this has been extended to: "open","fcntl.h","","int","const char*","int","...","mode_t" The existence of the "mode_t" tells tools/mksyscall that there is at most one optional parameter and, if present, it is of type mode_t.
2020-05-05 23:02:07 +02:00
SYSCALL_LOOKUP(prctl, 2, STUB_prctl)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
Add entropy pool and strong random number generator Entropy pool gathers environmental noise from device drivers, user-space, etc., and returns good random numbers, suitable for cryptographic use. Based on entropy pool design from *BSDs and uses BLAKE2Xs algorithm for CSPRNG output. Patch also adds /dev/urandom support for using entropy pool RNG and new 'getrandom' system call for getting randomness without file-descriptor usage (thus avoiding file-descriptor exhaustion attacks). The 'getrandom' interface is similar as 'getentropy' and 'getrandom' available on OpenBSD and Linux respectively.
2017-03-30 15:38:37 +02:00
/* The following is defined only if entropy pool random number generator
Run all .c and .h files in PR235 through tools/nxstyle.
2020-02-09 14:32:52 +01:00
* is enabled.
*/
Add entropy pool and strong random number generator Entropy pool gathers environmental noise from device drivers, user-space, etc., and returns good random numbers, suitable for cryptographic use. Based on entropy pool design from *BSDs and uses BLAKE2Xs algorithm for CSPRNG output. Patch also adds /dev/urandom support for using entropy pool RNG and new 'getrandom' system call for getting randomness without file-descriptor usage (thus avoiding file-descriptor exhaustion attacks). The 'getrandom' interface is similar as 'getentropy' and 'getrandom' available on OpenBSD and Linux respectively.
2017-03-30 15:38:37 +02:00
#ifdef CONFIG_CRYPTO_RANDOM_POOL
Improve proxy/stub parameter passing for variadic OS interfaces. In the past a very low effort interface was used: - All parmeters were treated as though they were type uinptr_t, and - The maximum number of parmeters (6) was passed in all cases. The first is potentially wrong and the second is very inefficient. This commit improves this by: - Making tools/mksyscall.c more intelligent, and - Extending the syntax for variadic functions. For example, in syscall.cvs, the open() API was represened like this: "open","fcntl.h","","int","const char*","int","..." In reality, open may take only a single optional argument of type mode_t which is not the same size as uintptr_t. And there is not reason to pass 6 parameters in that case. And this has been extended to: "open","fcntl.h","","int","const char*","int","...","mode_t" The existence of the "mode_t" tells tools/mksyscall that there is at most one optional parameter and, if present, it is of type mode_t.
2020-05-05 23:02:07 +02:00
SYSCALL_LOOKUP(getrandom, 2, STUB_getrandom)
Add entropy pool and strong random number generator Entropy pool gathers environmental noise from device drivers, user-space, etc., and returns good random numbers, suitable for cryptographic use. Based on entropy pool design from *BSDs and uses BLAKE2Xs algorithm for CSPRNG output. Patch also adds /dev/urandom support for using entropy pool RNG and new 'getrandom' system call for getting randomness without file-descriptor usage (thus avoiding file-descriptor exhaustion attacks). The 'getrandom' interface is similar as 'getentropy' and 'getrandom' available on OpenBSD and Linux respectively.
2017-03-30 15:38:37 +02:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/****************************************************************************
Run all .c and .h files in PR235 through tools/nxstyle.
2020-02-09 14:32:52 +01:00
* Public Function Prototypes
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
****************************************************************************/
Reference in New Issue Copy Permalink