sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
a9d7a776c4
nuttx/boards/arm/cxd56xx/spresense/configs/smp/defconfig

63 lines
1.6 KiB
Plaintext
Raw Normal View History

Merged in masayuki2009/nuttx.nuttx/spresense_smp (pull request #1041) Spresense smp * arch: arm: Add ARCH_GLOBAL_IRQDISABLE to ARCH_CHIP_CXD56XX in Kconfig Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Make fpuconfg() public in cxd56_start.c NOTE: fpuconfig() is called in both cxd56_start.c and cxd56_cpustart.c Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Add support for SMP NOTE: To run cxd56xx in SMP mode, new boot loader which will be released later must be used. Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Add irq routing for SMP in cxd56_irq.c NOTE: In cxd56xx, each external interrupt controller can be accessed from a local APP_DSP (Cortex-M4F) only. This commit supports IRQ routing for SMP by calling up_send_irqreq() in both up_enable_irq() and up_disable_irq(). Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * boards: spresense: Add smp configuration Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-03 15:06:21 +02:00
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_CXD56_I2C0_SCUSEQ is not set
# CONFIG_STANDARD_SERIAL is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="spresense"
CONFIG_ARCH_BOARD_SPRESENSE=y
CONFIG_ARCH_CHIP="cxd56xx"
CONFIG_ARCH_CHIP_CXD56XX=y
boards: spresense: Add interrupt stack to smp/defconfig Summary: - This commit adds CONFIG_ARCH_INTERRUPTSTACK=2048 to defconfig Impact: - None Testing: - Tested with ostest Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-07-02 06:12:11 +02:00
CONFIG_ARCH_INTERRUPTSTACK=2048
boards: spresense: Update smp/defconfig Summary: - Add CONFIG_ARCH_LEDS_CPU_ACTIVITY=y - Add CONFIG_BOARDCTL_RESET=y Impact: - None Testing: - Tested with ostest Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-12-10 10:20:36 +01:00
CONFIG_ARCH_LEDS_CPU_ACTIVITY=y
Merged in masayuki2009/nuttx.nuttx/spresense_smp (pull request #1041) Spresense smp * arch: arm: Add ARCH_GLOBAL_IRQDISABLE to ARCH_CHIP_CXD56XX in Kconfig Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Make fpuconfg() public in cxd56_start.c NOTE: fpuconfig() is called in both cxd56_start.c and cxd56_cpustart.c Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Add support for SMP NOTE: To run cxd56xx in SMP mode, new boot loader which will be released later must be used. Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Add irq routing for SMP in cxd56_irq.c NOTE: In cxd56xx, each external interrupt controller can be accessed from a local APP_DSP (Cortex-M4F) only. This commit supports IRQ routing for SMP by calling up_send_irqreq() in both up_enable_irq() and up_disable_irq(). Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * boards: spresense: Add smp configuration Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-03 15:06:21 +02:00
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_USEBASEPRI=y
boards: spresense: Update smp/defconfig Summary: - Add CONFIG_ARCH_LEDS_CPU_ACTIVITY=y - Add CONFIG_BOARDCTL_RESET=y Impact: - None Testing: - Tested with ostest Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-12-10 10:20:36 +01:00
CONFIG_BOARDCTL_RESET=y
boards: spresense: Add CONFIG_BOARD_LATE_INITIALIZE=y for SMP Summary: - I noticed that spresense:rndis_smp and spresense:wifi_smp do not boot due to the recent change in nx_start.c - As the result of the discussion, I understand that we have to add CONFIG_BOARD_LATE_INITIALIZE=y for SMP Impact: - spresense only Testing: - Tested with spresense:rndis_smp and spresense:wifi_smp Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
2021-07-02 16:01:23 +02:00
CONFIG_BOARD_LATE_INITIALIZE=y
Merged in masayuki2009/nuttx.nuttx/spresense_smp (pull request #1041) Spresense smp * arch: arm: Add ARCH_GLOBAL_IRQDISABLE to ARCH_CHIP_CXD56XX in Kconfig Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Make fpuconfg() public in cxd56_start.c NOTE: fpuconfig() is called in both cxd56_start.c and cxd56_cpustart.c Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Add support for SMP NOTE: To run cxd56xx in SMP mode, new boot loader which will be released later must be used. Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Add irq routing for SMP in cxd56_irq.c NOTE: In cxd56xx, each external interrupt controller can be accessed from a local APP_DSP (Cortex-M4F) only. This commit supports IRQ routing for SMP by calling up_send_irqreq() in both up_enable_irq() and up_disable_irq(). Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * boards: spresense: Add smp configuration Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-03 15:06:21 +02:00
CONFIG_BOARD_LOOPSPERMSEC=5434
CONFIG_BOOT_RUNFROMISRAM=y
CONFIG_BUILTIN=y
CONFIG_CLOCK_MONOTONIC=y
CONFIG_CXD56_BINARY=y
CONFIG_CXD56_I2C0=y
CONFIG_CXD56_I2C=y
CONFIG_CXD56_SPI4=y
CONFIG_CXD56_SPI5=y
CONFIG_CXD56_SPI=y
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_EXAMPLES_HELLO=y
CONFIG_FS_PROCFS=y
CONFIG_FS_PROCFS_REGISTER=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
boards: move USERMAIN_XX out of INIT_ENTRYPOINT Signed-off-by: ligd <liguiding1@xiaomi.com>
2021-12-23 04:56:43 +01:00
CONFIG_INIT_ENTRYPOINT="spresense_main"
Merged in masayuki2009/nuttx.nuttx/spresense_smp (pull request #1041) Spresense smp * arch: arm: Add ARCH_GLOBAL_IRQDISABLE to ARCH_CHIP_CXD56XX in Kconfig Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Make fpuconfg() public in cxd56_start.c NOTE: fpuconfig() is called in both cxd56_start.c and cxd56_cpustart.c Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Add support for SMP NOTE: To run cxd56xx in SMP mode, new boot loader which will be released later must be used. Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Add irq routing for SMP in cxd56_irq.c NOTE: In cxd56xx, each external interrupt controller can be accessed from a local APP_DSP (Cortex-M4F) only. This commit supports IRQ routing for SMP by calling up_send_irqreq() in both up_enable_irq() and up_disable_irq(). Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * boards: spresense: Add smp configuration Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-03 15:06:21 +02:00
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_READLINE=y
CONFIG_PREALLOC_TIMERS=4
CONFIG_RAM_SIZE=1572864
CONFIG_RAM_START=0x0d000000
CONFIG_READLINE_CMD_HISTORY=y
CONFIG_RR_INTERVAL=200
CONFIG_RTC=y
CONFIG_RTC_DRIVER=y
CONFIG_SMP=y
CONFIG_SMP_NCPUS=2
CONFIG_SPI=y
CONFIG_START_DAY=3
CONFIG_START_MONTH=10
CONFIG_START_YEAR=2019
CONFIG_SYSTEM_CLE=y
CONFIG_SYSTEM_NSH=y
Update defconfig per refresh.sh report Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-19 13:46:06 +02:00
CONFIG_SYSTEM_SYSTEM=y
Merged in masayuki2009/nuttx.nuttx/spresense_smp (pull request #1041) Spresense smp * arch: arm: Add ARCH_GLOBAL_IRQDISABLE to ARCH_CHIP_CXD56XX in Kconfig Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Make fpuconfg() public in cxd56_start.c NOTE: fpuconfig() is called in both cxd56_start.c and cxd56_cpustart.c Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Add support for SMP NOTE: To run cxd56xx in SMP mode, new boot loader which will be released later must be used. Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * arch: arm: cxd56xx: Add irq routing for SMP in cxd56_irq.c NOTE: In cxd56xx, each external interrupt controller can be accessed from a local APP_DSP (Cortex-M4F) only. This commit supports IRQ routing for SMP by calling up_send_irqreq() in both up_enable_irq() and up_disable_irq(). Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * boards: spresense: Add smp configuration Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-03 15:06:21 +02:00
CONFIG_SYSTEM_TASKSET=y
CONFIG_TESTING_OSTEST=y
CONFIG_TESTING_OSTEST_FPUSIZE=64
CONFIG_TESTING_SMP=y
CONFIG_UART1_SERIAL_CONSOLE=y
Reference in New Issue Copy Permalink