nuttx/boards/arm/stm32/nucleo-f446re/src/stm32_bringup.c

/****************************************************************************
 * boards/arm/stm32/nucleo-f446re/src/stm32_bringup.c
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <stdio.h>
#include <syslog.h>
#include <errno.h>

#include <nuttx/arch.h>
#include <nuttx/board.h>
#include <nuttx/sdio.h>
#include <nuttx/mmcsd.h>

#include <stm32.h>
#include <stm32_uart.h>

#include <arch/board/board.h>

#include "nucleo-f446re.h"

#ifdef CONFIG_SENSORS_QENCODER
#include "board_qencoder.h"
#endif

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: stm32_bringup
 *
 * Description:
 *   Perform architecture-specific initialization
 *
 *   CONFIG_BOARD_LATE_INITIALIZE=y :
 *     Called from board_late_initialize().
 *
 *   CONFIG_BOARD_LATE_INITIALIZE=n && CONFIG_LIB_BOARDCTL=y :
 *     Called from the NSH library
 *
 ****************************************************************************/

int stm32_bringup(void)
{
  int ret = OK;

#ifdef HAVE_MMCSD
  /* First, get an instance of the SDIO interface */

  g_sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO);
  if (!g_sdio)
    {
      syslog(LOG_ERR, "ERROR: Failed to initialize SDIO slot %d\n",
             CONFIG_NSH_MMCSDSLOTNO);
      return -ENODEV;
    }

  /* Now bind the SDIO interface to the MMC/SD driver */

  ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, g_sdio);
  if (ret != OK)
    {
      syslog(LOG_ERR,
             "ERROR: Failed to bind SDIO to the MMC/SD driver: %d\n",
             ret);
      return ret;
    }

  /* Then let's guess and say that there is a card in the slot. There is no
   * card detect GPIO.
   */

  sdio_mediachange(g_sdio, true);

  syslog(LOG_INFO, "[boot] Initialized SDIO\n");
#endif

#ifdef CONFIG_ADC
  /* Initialize ADC and register the ADC driver. */

  ret = stm32_adc_setup();
  if (ret < 0)
    {
      syslog(LOG_ERR, "ERROR: stm32_adc_setup failed: %d\n", ret);
    }
#endif

#ifdef CONFIG_CAN
  /* Initialize CAN and register the CAN driver. */

  ret = stm32_can_setup();
  if (ret < 0)
    {
      syslog(LOG_ERR, "ERROR: stm32_can_setup failed: %d\n", ret);
    }
#endif

#ifdef CONFIG_SENSORS_QENCODER
  /* Initialize and register the qencoder driver */

  ret = board_qencoder_initialize(0, CONFIG_NUCLEO_F401RE_QETIMER);
  if (ret != OK)
    {
      syslog(LOG_ERR,
             "ERROR: Failed to register the qencoder: %d\n",
             ret);
      return ret;
    }
#endif

#ifdef CONFIG_AJOYSTICK
  /* Initialize and register the joystick driver */

  ret = board_ajoy_initialize();
  if (ret != OK)
    {
      syslog(LOG_ERR,
             "ERROR: Failed to register the joystick driver: %d\n",
             ret);
      return ret;
    }
#endif

  return ret;
}