nuttx/drivers/syslog/syslog_rpmsg_server.c

220 lines
6.5 KiB
C
Raw Normal View History

This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
/****************************************************************************
* drivers/syslog/syslog_rpmsg_server.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
*
* http://www.apache.org/licenses/LICENSE-2.0
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
This commit brings in the drivers needed to support OpenAMP. These changes were ported from https://github.com/FishsemiCode/nuttx. The current state: Most drivers do now compile but are not yet verfied. This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository. Squashed commit of the following: Author: Xiang Xiao <xiaoxiang@pinecone.net> include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char. Author: Gregory Nutt <gnutt@nuttx.org> Fix several build issues/missing definitiona needed for OpenAMP build in drivers/. Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for). Author: Xiang Xiao <xiaoxiang@xiaomi.com> tools/: Fix the minor issue in Makefile Author: Gregory Nutt <gnutt@nuttx.org> drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle. tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste. fs/hostfs: Add configure and build support for hostfs RPC. drivers/timer: Add configure and build support for syslog RTC. drivers/syslog: Add configure and build support for syslog RPC. drivers/serial: Add configure and build support for serial RPC. Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support. drivers/rptun: Add configure and build support for OpenAMP tunnel drivers. drivers/net: Update Make.defs and Kconfig for OpenSDA support. Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now. Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application. Author: zhuyanlin <zhuyanlin@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Jianli Dong <dongjianli@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed. Author: Guiding Li <liguiding@pinecone.net> This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
2019-11-02 18:30:33 +01:00
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/kmalloc.h>
#include <nuttx/rptun/openamp.h>
#include <nuttx/syslog/syslog.h>
#include <nuttx/syslog/syslog_rpmsg.h>
#include "syslog.h"
#include "syslog_rpmsg.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define SYSLOG_RPMSG_MAXLEN 256
/****************************************************************************
* Private Types
****************************************************************************/
struct syslog_rpmsg_server_s
{
struct rpmsg_endpoint ept;
FAR char *tmpbuf;
unsigned int nextpos;
unsigned int alloced;
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static void syslog_rpmsg_write(FAR const char *buf1, size_t len1,
FAR const char *buf2, size_t len2);
static void syslog_rpmsg_ns_bind(FAR struct rpmsg_device *rdev,
FAR void *priv_, FAR const char *name,
uint32_t dest);
static void syslog_rpmsg_ns_unbind(FAR struct rpmsg_endpoint *ept);
static int syslog_rpmsg_ept_cb(FAR struct rpmsg_endpoint *ept,
FAR void *data, size_t len, uint32_t src,
FAR void *priv_);
/****************************************************************************
* Private Functions
****************************************************************************/
static void syslog_rpmsg_write(FAR const char *buf1, size_t len1,
FAR const char *buf2, size_t len2)
{
FAR const char *nl;
size_t len;
nl = memchr(buf2, '\n', len2);
DEBUGASSERT(nl != NULL);
len = nl + 1 - buf2;
if (len1 + len <= SYSLOG_RPMSG_MAXLEN)
{
char tmpbuf[SYSLOG_RPMSG_MAXLEN];
/* Ensure each syslog_write's buffer end with '\n' */
memcpy(tmpbuf, buf1, len1);
memcpy(tmpbuf + len1, buf2, len);
syslog_write(tmpbuf, len1 + len);
if (len < len2)
{
syslog_write(nl + 1, len2 - len);
}
}
else
{
/* Give up, the merge buffer is too big */
syslog_write(buf1, len1);
syslog_write(buf2, len2);
}
}
static void syslog_rpmsg_ns_bind(FAR struct rpmsg_device *rdev,
FAR void *priv_, FAR const char *name,
uint32_t dest)
{
FAR struct syslog_rpmsg_server_s *priv;
int ret;
if (strcmp(name, SYSLOG_RPMSG_EPT_NAME))
{
return;
}
priv = kmm_zalloc(sizeof(struct syslog_rpmsg_server_s));
if (!priv)
{
return;
}
priv->ept.priv = priv;
ret = rpmsg_create_ept(&priv->ept, rdev, SYSLOG_RPMSG_EPT_NAME,
RPMSG_ADDR_ANY, dest,
syslog_rpmsg_ept_cb, syslog_rpmsg_ns_unbind);
if (ret)
{
kmm_free(priv);
}
}
static void syslog_rpmsg_ns_unbind(FAR struct rpmsg_endpoint *ept)
{
FAR struct syslog_rpmsg_server_s *priv = ept->priv;
if (priv->nextpos)
{
syslog_rpmsg_write(priv->tmpbuf, priv->nextpos, "\n", 1);
}
rpmsg_destroy_ept(ept);
kmm_free(priv->tmpbuf);
kmm_free(priv);
}
static int syslog_rpmsg_ept_cb(FAR struct rpmsg_endpoint *ept, FAR void *data,
size_t len, uint32_t src, FAR void *priv_)
{
FAR struct syslog_rpmsg_server_s *priv = priv_;
FAR struct syslog_rpmsg_header_s *header = data;
if (header->command == SYSLOG_RPMSG_TRANSFER)
{
FAR struct syslog_rpmsg_transfer_s *msg = data;
struct syslog_rpmsg_header_s done;
unsigned int copied = msg->count;
unsigned int printed = 0;
FAR const char *nl;
nl = memrchr(msg->data, '\n', msg->count);
if (nl != NULL)
{
printed = nl + 1 - msg->data;
copied = msg->count - printed;
if (priv->nextpos)
{
syslog_rpmsg_write(priv->tmpbuf, priv->nextpos, msg->data, printed);
priv->nextpos = 0;
}
else
{
syslog_write(msg->data, printed);
}
}
if (copied != 0)
{
unsigned int newsize = priv->nextpos + copied;
if (newsize > priv->alloced)
{
char *newbuf = kmm_realloc(priv->tmpbuf, newsize);
if (newbuf != NULL)
{
priv->tmpbuf = newbuf;
priv->alloced = newsize;
}
else
{
copied = priv->alloced - priv->nextpos;
}
}
memcpy(priv->tmpbuf + priv->nextpos, msg->data + printed, copied);
priv->nextpos += copied;
}
done.command = SYSLOG_RPMSG_TRANSFER_DONE;
done.result = printed + copied;
rpmsg_send(ept, &done, sizeof(done));
}
return 0;
}
/****************************************************************************
* Public Functions
****************************************************************************/
int syslog_rpmsg_server_init(void)
{
return rpmsg_register_callback(NULL,
NULL,
NULL,
syslog_rpmsg_ns_bind);
}