must be "<ahref="#MemoryOrg">locked</a>" and always present in memory.
</li>
<li>
<b>Block the currently executing task</b>.
This function will call <code>up_block_task()</code> to block the task at the head of the ready-to-run list.
This should cause an interrupt level context switch to the next highest priority task.
The blocked task will be marked with state <code>TSTATE_WAIT_PAGEFILL</code> and will be retained in the <code>g_waitingforfill</code> prioritized task list.
</li>
<li>
<b>Boost the page fill worker thread priority</b>.
Check the priority of the task at the head of the <code>g_waitingforfill</code> list.
If the priority of that task is higher than the current priority of the page fill worker thread, then boost the priority of the page fill worker thread to that priority.
Thus, the page fill worker thread will always run at the priority of the highest priority task that is waiting for a fill.
</li>
<li>
<b>Signal the page fill worker thread</b>.
Is there a page already being filled?
If not then signal the page fill worker thread to start working on the queued page fill requests.
</li>
</ol>
</p>
<p>
When signaled from <code>pg_miss()</code>, the page fill worker thread will be awakenend and will initiate the fill operation.
</p>
<p>
<b>Input Parameters.</b>
None -- The head of the ready-to-run list is assumed to be that task that caused the exception.
The current task context should already be saved in the TCB of that task.
No additional inputs are required.
</p>
<p>
<b>Assumptions</b>.
<ul>
<li>
It is assumed that this function is called from the level of an exception handler and that all interrupts are disabled.
</li>
<li>
The <code>pg_miss()</code> must be "<ahref="#MemoryOrg">locked</a>" in memory.
Calling <code>pg_miss()</code> cannot cause a nested page fault.
</li>
<li>
It is assumed that currently executing task (the one at the head of the ready-to-run list) is the one that cause the fault.
This will always be true unless the page fault occurred in an interrupt handler.
Interrupt handling logic must always be available and "<ahref="#MemoryOrg">locked</a>" into memory so that page faults never come from interrupt handling.
</li>
<li>
The architecture-specific page fault exception handling has already verified that the exception did not occur from interrupt/exception handling logic.
</li>
<li>
As mentioned above, the task causing the page fault must not be the page fill worker thread because that is the only way to complete the page fill.
If no fill is in progress, <code>g_pftcb</code> will be NULL.
Otherwise, it will point to the TCB of the task which is receiving the fill that is in progess.
</p>
<ul><small>
<b>NOTE</b>:
I think that this is the only state in which a TCB does not reside in some list.
Here is it in limbo, outside of the normally queuing while the page file is in progress.
While here, it will be marked with TSTATE_TASK_INVALID.
</small></ul>
<p>
When awakened from <code>pg_miss()</code>, no fill will be in progress and <code>g_pftcb</code> will be NULL.
In this case, the page fill worker thread will call <code>pg_startfill()</code>.
That function will perform the following operations:
<ul>
<li>
Call the architecture-specific function <code>up_checkmapping()</code> to see if the page fill
still needs to be performed.
In certain conditions, the page fault may occur on several threads and be queued multiple times.
In this corner case, the blocked task will simply be restarted (see the logic below for the
case of normal completion of the fill operation).
</li>
<li>
Call <code>up_allocpage(tcb, &vpage)</code>.
This architecture-specific function will set aside page in memory and map to virtual address (vpage).
If all available pages are in-use (the typical case),
this function will select a page in-use, un-map it, and make it available.
</li>
<li>
Call the architecture-specific function <code>up_fillpage()</code>.
Two versions of the up_fillpage function are supported -- a blocking and a non-blocking version based upon the configuratin setting <code>CONFIG_PAGING_BLOCKINGFILL</code>.
<ul>
<li>
If <code>CONFIG_PAGING_BLOCKINGFILL</code> is defined, then up_fillpage is blocking call.
In this case, <code>up_fillpage()</code> will accept only (1) a reference to the TCB that requires the fill.
Architecture-specific context information within the TCB will be sufficient to perform the fill.
And (2) the (virtual) address of the allocated page to be filled.
The resulting status of the fill will be provided by return value from <code>up_fillpage()</code>.
</li>
<li>
If <code>CONFIG_PAGING_BLOCKINGFILL</code> is defined, then up_fillpage is non-blocking call.
In this case <code>up_fillpage()</code> will accept an additional argument:
The page fill worker thread will provide a callback function, <code>pg_callback</code>.
This function is non-blocking, it will start an asynchronous page fill.
After calling the non-blocking <code>up_fillpage()</code>, the page fill worker thread will wait to be signaled for the next event -- the fill completion event.
The callback function will be called when the page fill is finished (or an error occurs).
The resulting status of the fill will be providing as an argument to the callback functions.
This callback will probably occur from interrupt level.
</ul>
</li>
</ul>
</p>
<p>
In any case, while the fill is in progress, other tasks may execute.
If another page fault occurs during this time, the faulting task will be blocked, its TCB will be added (in priority order) to <code>g_waitingforfill</code>, and the priority of the page worker task may be boosted.
But no action will be taken until the current page fill completes.
NOTE: The IDLE task must also be fully <ahref="#MemoryOrg">locked</a> in memory.
The IDLE task cannot be blocked.
It the case where all tasks are blocked waiting for a page fill, the IDLE task must still be available to run.
<p>
The architecture-specific functions, <code>up_checkmapping()</code>, <code>up_allocpage(tcb, &vpage)</code> and <code>up_fillpage(page, pg_callback)</code>
will be prototyped in <code>include/nuttx/arch.h</code>
</p>
<aname="FillComplete"><h2>Fill Complete</h2></a>
<p>
For the blocking <code>up_fillpage()</code>, the result of the fill will be returned directly from the call to <code>up_fillpage</code>.
</p>
<p>
For the non-blocking <code>up_fillpage()</code>, the architecture-specific driver call the <code>pg_callback()</code> that was provided to <code>up_fillpage()</code> when the fill completes.
In this case, the <code>pg_callback()</code> will probably be called from driver interrupt-level logic.
The driver will provide the result of the fill as an argument to the callback function.
NOTE: <code>pg_callback()</code> must also be <ahref="#MemoryOrg">locked</a> in memory.
</p>
<p>
In this non-blocking case, the callback <code>pg_callback()</code> will perform the following operations when it is notified that the fill has completed:
<ul>
<li>
Verify that <code>g_pftcb</code> is non-NULL.
</li>
<li>
Find the higher priority between the task waiting for the fill to complete in <code>g_pftcb</code> and the task waiting at the head of the <code>g_waitingforfill</code> list.
That will be the priority of he highest priority task waiting for a fill.
</li>
<li>
If this higher priority is higher than current page fill worker thread, then boost worker thread's priority to that level.
Thus, the page fill worker thread will always run at the priority of the highest priority task that is waiting for a fill.
For the non-blocking <code>up_fillpage()</code>, the page fill worker thread will detect that the page fill is complete when it is awakened with <code>g_pftcb</code> non-NULL and fill completion status from <code>pg_callback</code>.
In the non-blocking case, the page fill worker thread will know that the page fill is complete when <code>up_fillpage()</code> returns.
</p>
<p>
In this either, the page fill worker thread will:
<ul>
<li>
Verify consistency of state information and <code>g_pftcb</code>.
</li>
<li>
Verify that the page fill completed successfully, and if so,
</li>
<li>
Call <code>up_unblocktask(g_pftcb)</code> to make the task that just received the fill ready-to-run.
</li>
<li>
Check if the <code>g_waitingforfill</code> list is empty.
If not:
<ul>
<li>
Remove the highest priority task waiting for a page fill from <code>g_waitingforfill</code>,
</li>
<li>
Save the task's TCB in <code>g_pftcb</code>,
</li>
<li>
If the priority of the thread in <code>g_pftcb</code>, is higher in priority than the default priority of the page fill worker thread, then set the priority of the page fill worker thread to that priority.
</li>
<li>
Call <code>pg_startfill()</code> which will start the next fill (as described above).
</li>
</ul>
</li>
<li>
Otherwise,
<ul>
<li>
Set <code>g_pftcb</code> to NULL.
</li>
<li>
Restore the default priority of the page fill worker thread.
</li>
<li>
Wait for the next fill related event (a new page fault).
</li>
</ul>
</li>
</ul>
</p>
<tablewidth ="100%">
<trbgcolor="#e4e4e4">
<td>
<aname="ArchSupport"><h1>Architecture-Specific Support Requirements</h1></a>
As an example, suppose that the size of the SRAM is 192K (as in the NXP LPC3131). And suppose further that:
<ul>
<li>
The size of the locked, memory resident .text area is 32K, and
</li>
<li>
The size of the DATA area is 64K.
</li>
<li>
The size of one, managed page is 1K.
</li>
<li>
The size of the whole .text image on the non-volatile, mass storage device is 1024K.
</li>
</ul>
<p>
Then, the size of the locked, memory resident code is 32K (<i>m</i>=32 pages).
The size of the physical page region is 96K (96 pages), and the
size of the data region is 64 pages.
And the size of the virtual paged region must then be greater than or equal to (1024-32) or 992 pages (<i>n</i>).
</p>
<p>
<b>Building the Locked, In-Memory Image</b>.
One way to accomplish this would be a two phase link:
<ul>
<li>
In the first phase, create a partially linked objected containing all interrupt/exception handling logic, the page fill worker thread plus all parts of the IDLE thread (which must always be available for execution).
</li>
<li>
All of the <code>.text</code> and <code>.rodata</code> sections of this partial link should be collected into a single section.
</li>
<li>
The second link would link the partially linked object along with the remaining object to produce the final binary.
The linker script should position the "special" section so that it lies in a reserved, "non-swappable" region.
This architecture-specific function will set aside page in memory and map to its correct virtual address.
Architecture-specific context information saved within the TCB will provide the function with the information needed to identify the virtual miss address.
This function will return the allocated physical page address in <code>vpage</code>.
The size of the underlying physical page is determined by the configuration setting <code>CONFIG_PAGING_PAGESIZE</code>.
NOTE: This function must <i>always</i> return a page allocation.
If all available pages are in-use (the typical case), then this function will select a page in-use, un-map it, and make it available.
The actual filling of the page with data from the non-volatile, must be performed by a separate call to the architecture-specific function, <code>up_fillpage()</code>.
This will start asynchronous page fill.
The common paging logic will provide a callback function, <code>pg_callback</code>, that will be called when the page fill is finished (or an error occurs).
This callback is assumed to occur from an interrupt level when the device driver completes the fill operation.
