sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
ba12c6c0cf
nuttx/include/sys/syscall_lookup.h

387 lines
12 KiB
C
Raw Normal View History

Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/****************************************************************************
syscall: Generate SYS_ number from syscall_lookup.h to reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-07 08:42:52 +02:00
* include/sys/syscall_lookup.h
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
*
syscall/: Remove support for CONFIG_FS_READABLE
2020-03-21 18:02:42 +01:00
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
*
syscall/: Remove support for CONFIG_FS_READABLE
2020-03-21 18:02:42 +01:00
* http://www.apache.org/licenses/LICENSE-2.0
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
*
syscall/: Remove support for CONFIG_FS_READABLE
2020-03-21 18:02:42 +01:00
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
*
****************************************************************************/
/* SYSCALL_LOOKUP must be defined before including this file.
*
* These first system calls are supported regardless of the NuttX
* configuration
*/
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP1(_exit, 1)
SYSCALL_LOOKUP(exit, 1)
SYSCALL_LOOKUP(getpid, 0)
SYSCALL_LOOKUP(sched_getparam, 2)
SYSCALL_LOOKUP(sched_getscheduler, 1)
SYSCALL_LOOKUP(sched_lock, 0)
SYSCALL_LOOKUP(sched_lockcount, 0)
SYSCALL_LOOKUP(sched_rr_get_interval, 2)
SYSCALL_LOOKUP(sched_setparam, 2)
SYSCALL_LOOKUP(sched_setscheduler, 3)
SYSCALL_LOOKUP(sched_unlock, 0)
SYSCALL_LOOKUP(sched_yield, 0)
Fix minor spacing problems from 1017 and 1018
2020-05-09 22:08:44 +02:00
SYSCALL_LOOKUP(nxsched_get_stackinfo, 2)
syscall: Expose sched_getaffinity and sched_setaffinity
2020-02-09 08:38:50 +01:00
sched/sched/sched_getcpu.c: Implement non-standard interface. If SMP is enabled this function will return the number of the CPU that the thread is running on. This is non-standard but follows GLIBC if __GNU_SOURCE is enabled. The returned CPU number is, however, worthless since it returns the CPU number of the CPU that was executing the task when the function was called. The application can never know the true CPU number of the CPU tht it is running on since that value is volatile and change change at any time.
2020-01-31 21:25:15 +01:00
#ifdef CONFIG_SMP
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(sched_getaffinity, 3)
SYSCALL_LOOKUP(sched_getcpu, 0)
SYSCALL_LOOKUP(sched_setaffinity, 3)
sched/sched/sched_getcpu.c: Implement non-standard interface. If SMP is enabled this function will return the number of the CPU that the thread is running on. This is non-standard but follows GLIBC if __GNU_SOURCE is enabled. The returned CPU number is, however, worthless since it returns the CPU number of the CPU that was executing the task when the function was called. The application can never know the true CPU number of the CPU tht it is running on since that value is volatile and change change at any time.
2020-01-31 21:25:15 +01:00
#endif
libc: Make gethostname as syscall instead of uname simplify and symmetry the implementation in KERNEL/PROTECTED build Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Change-Id: Iefdeea5f6ef6348c774b2ca9f7e45fe89c0c22dd
2020-07-28 11:52:17 +02:00
SYSCALL_LOOKUP(gethostname, 2)
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(sethostname, 2)
Create a build structure that will (eventually) support using the VFS to manage named semaphores
2014-09-28 20:19:01 +02:00
sched/group and syscall/: Implement 'real' setuid, getuid, setgid, and getgid interfaces. These will be inheritance by all child task groups.
2019-08-06 22:13:43 +02:00
/* User identity */
#ifdef CONFIG_SCHED_USER_IDENTITY
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(setuid, 1)
SYSCALL_LOOKUP(getuid, 0)
SYSCALL_LOOKUP(setgid, 1)
SYSCALL_LOOKUP(getgid, 0)
sched/group and syscall/: Implement 'real' setuid, getuid, setgid, and getgid interfaces. These will be inheritance by all child task groups.
2019-08-06 22:13:43 +02:00
#endif
Create a build structure that will (eventually) support using the VFS to manage named semaphores
2014-09-28 20:19:01 +02:00
/* Semaphores */
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(sem_destroy, 1)
SYSCALL_LOOKUP(sem_post, 1)
Implement proposed POSIX _clockwait variants of existing _timedwait functions Here is the related glibc patchset: https://patchwork.ozlabs.org/project/glibc/cover/cover.b0c66849a87ca79889a49f2f1f2563b1a8a15d8b.1551291557.git-series.mac@mcrowe.com/ Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Change-Id: I0095cb34cef3d0d88a100255053da79266b73ff2
2020-07-27 07:46:03 +02:00
SYSCALL_LOOKUP(sem_clockwait, 3)
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(sem_timedwait, 2)
SYSCALL_LOOKUP(sem_trywait, 1)
SYSCALL_LOOKUP(sem_wait, 1)
Create a build structure that will (eventually) support using the VFS to manage named semaphores
2014-09-28 20:19:01 +02:00
Add pthread_mutexattr_get/set_protocol and non-standard sem_get/set_protocol. These may use to enable or disable priority inheritance on a single semaphore.
2016-11-02 16:05:18 +01:00
#ifdef CONFIG_PRIORITY_INHERITANCE
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(sem_setprotocol, 2)
Add pthread_mutexattr_get/set_protocol and non-standard sem_get/set_protocol. These may use to enable or disable priority inheritance on a single semaphore.
2016-11-02 16:05:18 +01:00
#endif
Create a build structure that will (eventually) support using the VFS to manage named semaphores
2014-09-28 20:19:01 +02:00
/* Named semaphores */
Fix conditional compilation error introduced with the named semaphore changes
2014-09-29 15:54:45 +02:00
#ifdef CONFIG_FS_NAMED_SEMAPHORES
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(sem_open, 4)
SYSCALL_LOOKUP(sem_close, 1)
SYSCALL_LOOKUP(sem_unlink, 1)
Create a build structure that will (eventually) support using the VFS to manage named semaphores
2014-09-28 20:19:01 +02:00
#endif
First round of changes to get the ELF configuration building again
2014-09-16 23:37:05 +02:00
#ifndef CONFIG_BUILD_KERNEL
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(task_create, 5)
syscall: nx_task_spawn should exist in the flat build just like the protected build Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-02 12:36:48 +02:00
#ifdef CONFIG_LIB_SYSCALL
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(nx_task_spawn, 1)
syscall/ and related: Fix an error found in build testing. Inconsistent conditional compilation led to link errors in certain configurations.
2019-08-28 00:41:07 +02:00
#endif
First round of changes to get the ELF configuration building again
2014-09-16 23:37:05 +02:00
#else
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(pgalloc, 2)
Can't used task_create() if address environments enabled
2014-08-27 22:19:41 +02:00
#endif
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(task_delete, 1)
SYSCALL_LOOKUP(task_restart, 1)
SYSCALL_LOOKUP(task_setcancelstate, 2)
SYSCALL_LOOKUP(up_assert, 2)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
syscall: Generate SYS_ number from syscall_lookup.h to reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-07 08:42:52 +02:00
#ifdef CONFIG_CANCELLATION_POINTS
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(task_setcanceltype, 2)
SYSCALL_LOOKUP(task_testcancel, 0)
syscall: Generate SYS_ number from syscall_lookup.h to reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-07 08:42:52 +02:00
#endif
Add task_setcanceltype()
2016-12-10 23:06:14 +01:00
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following can be individually enabled */
syscall/: Adapt the conditional compile logic on when to include the vfork() syscall proxy and stub to the logic used for vfork() itself.
2019-07-10 15:25:00 +02:00
#if defined(CONFIG_SCHED_WAITPID) && defined(CONFIG_ARCH_HAVE_VFORK)
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(vfork, 0)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
#ifdef CONFIG_SCHED_ATEXIT
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(atexit, 1)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
#ifdef CONFIG_SCHED_ONEXIT
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(on_exit, 2)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
#ifdef CONFIG_SCHED_WAITPID
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(waitpid, 3)
syscall: Generate SYS_ number from syscall_lookup.h to reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-07 08:42:52 +02:00
#ifdef CONFIG_SCHED_HAVE_PARENT
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(wait, 1)
SYSCALL_LOOKUP(waitid, 4)
syscall: Generate SYS_ number from syscall_lookup.h to reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-07 08:42:52 +02:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
Add syscall support for insmod and rmmod
2015-12-12 18:11:09 +01:00
/* The following can only be defined if we are configured to load
* OS modules from a file system.
*/
#ifdef CONFIG_MODULE
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(insmod, 2)
SYSCALL_LOOKUP(rmmod, 1)
SYSCALL_LOOKUP(modhandle, 1)
Add syscall support for insmod and rmmod
2015-12-12 18:11:09 +01:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following can only be defined if we are configured to execute
* programs from a file system.
*/
syscall/: The non-standard interface exec() is now enshrined as a official NuttX API. I really dislike doing this but I think that this is probably the only want to load programs in the protected mode. It is currently used by some example code under apps/ that generate their own symbol tables for linking. Other file execution APIs relay on a symbol table provided by the OS. In the protected mode, the OS cannot provide any meaning symbol table for execution of code in the user-space blob so that is they exec() is really needed in that build case. And, finally, the interface is completely useless and will not be supported in the KERNEL build mode where the contrary is true: An application process cannot provide any meaning symbolic information for use in linking a different process.
2017-10-03 15:09:35 +02:00
#ifndef CONFIG_BINFMT_DISABLE
#ifndef CONFIG_BUILD_KERNEL
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(exec, 4)
syscall/: The non-standard interface exec() is now enshrined as a official NuttX API. I really dislike doing this but I think that this is probably the only want to load programs in the protected mode. It is currently used by some example code under apps/ that generate their own symbol tables for linking. Other file execution APIs relay on a symbol table provided by the OS. In the protected mode, the OS cannot provide any meaning symbol table for execution of code in the user-space blob so that is they exec() is really needed in that build case. And, finally, the interface is completely useless and will not be supported in the KERNEL build mode where the contrary is true: An application process cannot provide any meaning symbolic information for use in linking a different process.
2017-10-03 15:09:35 +02:00
#endif
#ifdef CONFIG_LIBC_EXECFUNCS
binfmt/ and libs/libc: Make exepath_*() more common: 1. Move exepath_*() related code to libc/misc 1. Rename exepath_ to envpath_ 2. Rename BINFMT_EXEPATH to LIB_ENVPATH libs/libc/modlib: Add pre module library symbol table support
2018-11-08 14:27:14 +01:00
#ifdef CONFIG_LIB_ENVPATH
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(posix_spawnp, 6)
syscall/: The non-standard interface exec() is now enshrined as a official NuttX API. I really dislike doing this but I think that this is probably the only want to load programs in the protected mode. It is currently used by some example code under apps/ that generate their own symbol tables for linking. Other file execution APIs relay on a symbol table provided by the OS. In the protected mode, the OS cannot provide any meaning symbol table for execution of code in the user-space blob so that is they exec() is really needed in that build case. And, finally, the interface is completely useless and will not be supported in the KERNEL build mode where the contrary is true: An application process cannot provide any meaning symbolic information for use in linking a different process.
2017-10-03 15:09:35 +02:00
#else
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(posix_spawn, 6)
syscall/: The non-standard interface exec() is now enshrined as a official NuttX API. I really dislike doing this but I think that this is probably the only want to load programs in the protected mode. It is currently used by some example code under apps/ that generate their own symbol tables for linking. Other file execution APIs relay on a symbol table provided by the OS. In the protected mode, the OS cannot provide any meaning symbol table for execution of code in the user-space blob so that is they exec() is really needed in that build case. And, finally, the interface is completely useless and will not be supported in the KERNEL build mode where the contrary is true: An application process cannot provide any meaning symbolic information for use in linking a different process.
2017-10-03 15:09:35 +02:00
#endif
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(execv, 2)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
syscall/: The non-standard interface exec() is now enshrined as a official NuttX API. I really dislike doing this but I think that this is probably the only want to load programs in the protected mode. It is currently used by some example code under apps/ that generate their own symbol tables for linking. Other file execution APIs relay on a symbol table provided by the OS. In the protected mode, the OS cannot provide any meaning symbol table for execution of code in the user-space blob so that is they exec() is really needed in that build case. And, finally, the interface is completely useless and will not be supported in the KERNEL build mode where the contrary is true: An application process cannot provide any meaning symbolic information for use in linking a different process.
2017-10-03 15:09:35 +02:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following are only defined is signals are supported in the NuttX
* configuration.
*/
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(kill, 2)
SYSCALL_LOOKUP(sigaction, 3)
SYSCALL_LOOKUP(sigpending, 1)
SYSCALL_LOOKUP(sigprocmask, 3)
SYSCALL_LOOKUP(sigqueue, 3)
SYSCALL_LOOKUP(sigsuspend, 1)
SYSCALL_LOOKUP(sigtimedwait, 3)
SYSCALL_LOOKUP(sigwaitinfo, 2)
SYSCALL_LOOKUP(clock_nanosleep, 4)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following are only defined if the system clock is enabled in the
* NuttX configuration.
*/
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(clock, 0)
SYSCALL_LOOKUP(clock_getres, 2)
SYSCALL_LOOKUP(clock_gettime, 2)
SYSCALL_LOOKUP(clock_settime, 2)
Rename CONFIG_SCHED_TIMEKEEPING to CONFIG_CLOCK_TIMEKEEPING. That is a better compartmentalized name.
2016-07-11 14:54:02 +02:00
#ifdef CONFIG_CLOCK_TIMEKEEPING
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(adjtime, 2)
Add support for adjtime system call
2016-07-11 00:55:32 +02:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following are defined only if POSIX timers are supported */
#ifndef CONFIG_DISABLE_POSIX_TIMERS
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(timer_create, 3)
SYSCALL_LOOKUP(timer_delete, 1)
SYSCALL_LOOKUP(timer_getoverrun, 1)
SYSCALL_LOOKUP(timer_gettime, 2)
SYSCALL_LOOKUP(timer_settime, 4)
SYSCALL_LOOKUP(getitimer, 2)
SYSCALL_LOOKUP(setitimer, 3)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
vsyslog is now a system call
2016-06-19 15:03:44 +02:00
/* System logging */
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(nx_vsyslog, 3)
vsyslog is now a system call
2016-06-19 15:03:44 +02:00
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following are defined if either file or socket descriptor are
* enabled.
*/
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(close, 1)
SYSCALL_LOOKUP(ioctl, 3)
SYSCALL_LOOKUP(read, 3)
SYSCALL_LOOKUP(write, 3)
SYSCALL_LOOKUP(pread, 4)
SYSCALL_LOOKUP(pwrite, 4)
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#ifdef CONFIG_FS_AIO
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(aio_read, 1)
SYSCALL_LOOKUP(aio_write, 1)
SYSCALL_LOOKUP(aio_fsync, 2)
SYSCALL_LOOKUP(aio_cancel, 2)
#endif
SYSCALL_LOOKUP(poll, 3)
SYSCALL_LOOKUP(select, 5)
SYSCALL_LOOKUP(ppoll, 4)
SYSCALL_LOOKUP(pselect, 6)
fs/vfs: Add file descriptor based events support
2020-07-28 13:08:48 +02:00
#ifdef CONFIG_EVENT_FD
SYSCALL_LOOKUP(eventfd, 2)
#endif
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#ifdef CONFIG_NETDEV_IFINDEX
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(if_indextoname, 2)
SYSCALL_LOOKUP(if_nametoindex, 1)
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#endif
#ifdef CONFIG_SERIAL_TERMIOS
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(tcdrain, 1)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
boardctl(): Add a new non-standard OS interface. This is similar to a driver IOCTL call. But this is an IOCTL call directly on the board logic. This function will eventually replace all of the ad hoc OS interfaces that are current used to perform application specific intialiation and application driver test confifuration. It essentially formalizes and institutionalizes these rogue interface in to at least a single crazy call.
2015-03-31 19:25:52 +02:00
/* Board support */
#ifdef CONFIG_LIB_BOARDCTL
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(boardctl, 2)
boardctl(): Add a new non-standard OS interface. This is similar to a driver IOCTL call. But this is an IOCTL call directly on the board logic. This function will eventually replace all of the ad hoc OS interfaces that are current used to perform application specific intialiation and application driver test confifuration. It essentially formalizes and institutionalizes these rogue interface in to at least a single crazy call.
2015-03-31 19:25:52 +02:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following are defined if file descriptors are enabled */
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(closedir, 1)
SYSCALL_LOOKUP(dup, 1)
SYSCALL_LOOKUP(dup2, 2)
SYSCALL_LOOKUP(fcntl, 3)
SYSCALL_LOOKUP(lseek, 3)
SYSCALL_LOOKUP(mmap, 6)
SYSCALL_LOOKUP(open, 3)
SYSCALL_LOOKUP(opendir, 1)
SYSCALL_LOOKUP(readdir, 1)
SYSCALL_LOOKUP(rewinddir, 1)
SYSCALL_LOOKUP(seekdir, 2)
SYSCALL_LOOKUP(stat, 2)
fs: Implement lstat function specified here: https://pubs.opengroup.org/onlinepubs/009695399/functions/lstat.html Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Change-Id: Iefc23a02d425ff84fa4027aea7da1181b01eced7
2020-06-22 10:44:32 +02:00
SYSCALL_LOOKUP(lstat, 2)
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(fstat, 2)
SYSCALL_LOOKUP(statfs, 2)
SYSCALL_LOOKUP(fstatfs, 2)
SYSCALL_LOOKUP(telldir, 1)
syscall: Generate SYS_ number from syscall_lookup.h to reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-07 08:42:52 +02:00
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
#if defined(CONFIG_FS_RAMMAP)
SYSCALL_LOOKUP(munmap, 2)
syscall/syscall.csv: Correct an error in creating the munmap() proxy if CONFIG_FS_RAMMAP is not defined.
2019-04-05 04:37:32 +02:00
#endif
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
#if defined(CONFIG_PSEUDOFS_SOFTLINKS)
fs: Rename link to symlink since the current implementation is really a symoblic link not hard link Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Change-Id: I59d30d0a620b0b5714fe91bbe90d4405cf53d187
2020-07-01 07:37:39 +02:00
SYSCALL_LOOKUP(symlink, 2)
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(readlink, 3)
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#endif
Soft links: Update Documentation, rename file, add system calls
2017-02-03 00:11:08 +01:00
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#if defined(CONFIG_PIPES) && CONFIG_DEV_PIPE_SIZE > 0
drivers/pipes: nx_pipe syscall takes three params, also use nx_close on error path Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2020-10-28 15:54:40 +01:00
SYSCALL_LOOKUP(nx_pipe, 3)
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(nx_mkfifo, 3)
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#endif
Fix pipe2() and mkfifo2() syscall logic
2016-07-20 23:26:54 +02:00
libc/stdio: Allocate file_struct dynamically 1.Reduce the default size of task_group_s(~512B each task) 2.Scale better between simple and complex application Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Change-Id: Ia872137504fddcf64d89c48d6f0593d76d582710
2020-08-13 12:17:29 +02:00
#ifdef CONFIG_FILE_STREAM
fs/vfs/fd_open.c: fs_fdopen() must not set errno Functions within the OS must never set the errno value. fs_fdopen() was setting the errno value. Now, after some parameter changes, it reports errors via a negated errno integer return value as do most all other internal OS functions.
2020-05-23 06:58:52 +02:00
SYSCALL_LOOKUP(fs_fdopen, 4)
Fix minor spacing problems from 1017 and 1018
2020-05-09 22:08:44 +02:00
SYSCALL_LOOKUP(nxsched_get_streams, 0)
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#endif
Optimized sendfile() from Max Holtzberg
2013-09-28 22:47:49 +02:00
syscall: Generate SYS_ number from syscall_lookup.h to reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-07 08:42:52 +02:00
#ifdef CONFIG_NET_SENDFILE
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(sendfile, 4)
CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense. Squashed commit of the following: configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3. fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS. syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0 binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0 sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3 configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 19:09:26 +01:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
syscall: Generate SYS_ number from syscall_lookup.h to reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-07 08:42:52 +02:00
#ifndef CONFIG_DISABLE_MOUNTPOINT
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(mount, 5)
SYSCALL_LOOKUP(fsync, 1)
SYSCALL_LOOKUP(ftruncate, 2)
SYSCALL_LOOKUP(mkdir, 2)
SYSCALL_LOOKUP(rename, 2)
SYSCALL_LOOKUP(rmdir, 1)
SYSCALL_LOOKUP(umount2, 2)
SYSCALL_LOOKUP(unlink, 1)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
Add system calls for shared memory interfaces
2014-09-22 23:24:09 +02:00
/* Shared memory interfaces */
#ifdef CONFIG_MM_SHM
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(shmget, 3)
SYSCALL_LOOKUP(shmat, 3)
SYSCALL_LOOKUP(shmctl, 3)
SYSCALL_LOOKUP(shmdt, 1)
Add system calls for shared memory interfaces
2014-09-22 23:24:09 +02:00
#endif
Fix up some problems/issues remaining from PR 1007 1. Add missing conditional logic in include/sys/syscall_lookup.h 2. CONFIG_NPTHREAD_KEYS removed from code but was still in sched/Kconfig 3. Refresh all configurations affected by PR 1007 4. syscall/syscall_funclookup.c needs to include nuttx/tls.h
2020-05-08 20:02:42 +02:00
#if CONFIG_TLS_NELEM > 0
Move pthread-specific data into TLS 1. Move pthread-specific data files from sched/pthread/ to libs/libc/pthread. 2. Remove pthread-specific data functions from syscalls. 3. Implement tls_alloc() and tls_free() with system calls. 4. Reimplement pthread_key_create() and pthread_key_free() using tls_alloc() and tls_free(). 5. Reimplement pthread_set_specific() and pthread_get_specicif() using tls_set_value() and tls_get_value()
2020-05-08 15:23:26 +02:00
SYSCALL_LOOKUP(tls_alloc, 0)
SYSCALL_LOOKUP(tls_free, 1)
Fix up some problems/issues remaining from PR 1007 1. Add missing conditional logic in include/sys/syscall_lookup.h 2. CONFIG_NPTHREAD_KEYS removed from code but was still in sched/Kconfig 3. Refresh all configurations affected by PR 1007 4. syscall/syscall_funclookup.c needs to include nuttx/tls.h
2020-05-08 20:02:42 +02:00
#endif
Move pthread-specific data into TLS 1. Move pthread-specific data files from sched/pthread/ to libs/libc/pthread. 2. Remove pthread-specific data functions from syscalls. 3. Implement tls_alloc() and tls_free() with system calls. 4. Reimplement pthread_key_create() and pthread_key_free() using tls_alloc() and tls_free(). 5. Reimplement pthread_set_specific() and pthread_get_specicif() using tls_set_value() and tls_get_value()
2020-05-08 15:23:26 +02:00
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
/* The following are defined if pthreads are enabled */
#ifndef CONFIG_DISABLE_PTHREAD
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(pthread_cancel, 1)
SYSCALL_LOOKUP(pthread_cond_broadcast, 1)
SYSCALL_LOOKUP(pthread_cond_signal, 1)
SYSCALL_LOOKUP(pthread_cond_wait, 2)
SYSCALL_LOOKUP(pthread_create, 4)
SYSCALL_LOOKUP(pthread_detach, 1)
SYSCALL_LOOKUP(pthread_exit, 1)
SYSCALL_LOOKUP(pthread_getschedparam, 3)
SYSCALL_LOOKUP(pthread_join, 2)
SYSCALL_LOOKUP(pthread_mutex_destroy, 1)
SYSCALL_LOOKUP(pthread_mutex_init, 2)
SYSCALL_LOOKUP(pthread_mutex_timedlock, 2)
SYSCALL_LOOKUP(pthread_mutex_trylock, 1)
SYSCALL_LOOKUP(pthread_mutex_unlock, 1)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
#ifndef CONFIG_PTHREAD_MUTEX_UNSAFE
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(pthread_mutex_consistent, 1)
Add syscall support for pthread_mutex_consistent()
2017-03-27 17:36:03 +02:00
#endif
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(pthread_setschedparam, 3)
SYSCALL_LOOKUP(pthread_setschedprio, 2)
Squashed commit of the following: libs/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. syscall/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. wireless/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. Documentation/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. include/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. drivers/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. sched/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. configs: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/xtensa: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/z80: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/x86: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/renesas and arch/risc-v: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/or1k: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/misoc: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/mips: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/avr: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/arm: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
2019-04-29 22:52:05 +02:00
#ifdef CONFIG_SMP
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(pthread_setaffinity_np, 3)
SYSCALL_LOOKUP(pthread_getaffinity_np, 3)
Squashed commit of the following: libs/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. syscall/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. wireless/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. Documentation/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. include/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. drivers/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. sched/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. configs: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/xtensa: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/z80: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/x86: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/renesas and arch/risc-v: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/or1k: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/misoc: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/mips: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/avr: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/arm: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
2019-04-29 22:52:05 +02:00
#endif
Implement proposed POSIX _clockwait variants of existing _timedwait functions Here is the related glibc patchset: https://patchwork.ozlabs.org/project/glibc/cover/cover.b0c66849a87ca79889a49f2f1f2563b1a8a15d8b.1551291557.git-series.mac@mcrowe.com/ Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Change-Id: I0095cb34cef3d0d88a100255053da79266b73ff2
2020-07-27 07:46:03 +02:00
SYSCALL_LOOKUP(pthread_cond_clockwait, 4)
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(pthread_kill, 2)
SYSCALL_LOOKUP(pthread_sigmask, 3)
Squashed commit of the following: libs/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. syscall/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. wireless/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. Documentation/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. include/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. drivers/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. sched/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. configs: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/xtensa: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/z80: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/x86: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/renesas and arch/risc-v: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/or1k: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/misoc: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/mips: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/avr: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/arm: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
2019-04-29 22:52:05 +02:00
#ifdef CONFIG_PTHREAD_CLEANUP
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(pthread_cleanup_push, 2)
SYSCALL_LOOKUP(pthread_cleanup_pop, 1)
Squashed commit of the following: libs/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. syscall/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. wireless/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. Documentation/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. include/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. drivers/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. sched/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. configs: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/xtensa: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/z80: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/x86: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/renesas and arch/risc-v: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled. arch/or1k: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/misoc: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/mips: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/avr: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled. arch/arm: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
2019-04-29 22:52:05 +02:00
#endif
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
/* The following are defined only if message queues are enabled */
#ifndef CONFIG_DISABLE_MQUEUE
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(mq_close, 1)
SYSCALL_LOOKUP(mq_getattr, 2)
SYSCALL_LOOKUP(mq_notify, 2)
SYSCALL_LOOKUP(mq_open, 4)
SYSCALL_LOOKUP(mq_receive, 4)
SYSCALL_LOOKUP(mq_send, 4)
SYSCALL_LOOKUP(mq_setattr, 3)
SYSCALL_LOOKUP(mq_timedreceive, 5)
SYSCALL_LOOKUP(mq_timedsend, 5)
SYSCALL_LOOKUP(mq_unlink, 1)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
/* The following are defined only if environment variables are supported */
#ifndef CONFIG_DISABLE_ENVIRON
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(clearenv, 0)
SYSCALL_LOOKUP(getenv, 1)
SYSCALL_LOOKUP(putenv, 1)
SYSCALL_LOOKUP(setenv, 3)
SYSCALL_LOOKUP(unsetenv, 1)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
/* The following are defined only if networking AND sockets are supported */
syscall/syscall_lookup.h: Fix a newly introduced warning found in build testing.
2019-02-12 01:08:49 +01:00
#ifdef CONFIG_NET
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(accept, 3)
SYSCALL_LOOKUP(bind, 3)
SYSCALL_LOOKUP(connect, 3)
SYSCALL_LOOKUP(getpeername, 3)
SYSCALL_LOOKUP(getsockname, 3)
SYSCALL_LOOKUP(getsockopt, 5)
SYSCALL_LOOKUP(listen, 2)
SYSCALL_LOOKUP(recv, 4)
SYSCALL_LOOKUP(recvfrom, 6)
SYSCALL_LOOKUP(send, 4)
SYSCALL_LOOKUP(sendto, 6)
SYSCALL_LOOKUP(setsockopt, 5)
SYSCALL_LOOKUP(socket, 3)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
/* The following is defined only if CONFIG_TASK_NAME_SIZE > 0 */
#if CONFIG_TASK_NAME_SIZE > 0
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(prctl, 2)
Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
2013-03-06 20:56:32 +01:00
#endif
Add entropy pool and strong random number generator Entropy pool gathers environmental noise from device drivers, user-space, etc., and returns good random numbers, suitable for cryptographic use. Based on entropy pool design from *BSDs and uses BLAKE2Xs algorithm for CSPRNG output. Patch also adds /dev/urandom support for using entropy pool RNG and new 'getrandom' system call for getting randomness without file-descriptor usage (thus avoiding file-descriptor exhaustion attacks). The 'getrandom' interface is similar as 'getentropy' and 'getrandom' available on OpenBSD and Linux respectively.
2017-03-30 15:38:37 +02:00
/* The following is defined only if entropy pool random number generator
Run all .c and .h files in PR235 through tools/nxstyle.
2020-02-09 14:32:52 +01:00
* is enabled.
*/
Add entropy pool and strong random number generator Entropy pool gathers environmental noise from device drivers, user-space, etc., and returns good random numbers, suitable for cryptographic use. Based on entropy pool design from *BSDs and uses BLAKE2Xs algorithm for CSPRNG output. Patch also adds /dev/urandom support for using entropy pool RNG and new 'getrandom' system call for getting randomness without file-descriptor usage (thus avoiding file-descriptor exhaustion attacks). The 'getrandom' interface is similar as 'getentropy' and 'getrandom' available on OpenBSD and Linux respectively.
2017-03-30 15:38:37 +02:00
#ifdef CONFIG_CRYPTO_RANDOM_POOL
syscall: Generate STUB prototype automatically reduce the maintainance effort Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 06:20:26 +02:00
SYSCALL_LOOKUP(getrandom, 2)
Add entropy pool and strong random number generator Entropy pool gathers environmental noise from device drivers, user-space, etc., and returns good random numbers, suitable for cryptographic use. Based on entropy pool design from *BSDs and uses BLAKE2Xs algorithm for CSPRNG output. Patch also adds /dev/urandom support for using entropy pool RNG and new 'getrandom' system call for getting randomness without file-descriptor usage (thus avoiding file-descriptor exhaustion attacks). The 'getrandom' interface is similar as 'getentropy' and 'getrandom' available on OpenBSD and Linux respectively.
2017-03-30 15:38:37 +02:00
#endif
Reference in New Issue Copy Permalink