sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
bd4e8e19d3
nuttx/boards/renesas/rx65n/rx65n-rsk2mb/README.txt

213 lines
7.4 KiB
Plaintext
Raw Normal View History

We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
README
======
This README file discusses the port of NuttX to the RX65N RSK2MB board. This board features the RX65N (R5F565NEHDFC 176pin)
Contents
========
- Board Features
- Status/Open Issues
- Serial Console
- LEDs
- Networking
- Debugging
Board Features
==============
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
- Mounted devices: RX65N (R5F565NEDDFC: No Encrypt Function, Code Flash 2MB, Pin Count 176-pin),
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
or RX65N (R5F565NEHDFC: Supported Encrypt Function, Code Flash 2MB, Pin Count 176-pin)
- Mounts TFT Display. Graphic LCD controller can be evaluated
- 1 channel Ethernet can be evaluated
- RX65N builds in Trusted Secure IP. AES encryption function and robust key management can be evaluated (*)
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
- Mounts SD slot. If an optional Wireless LAN expansion board package for RSK (RTK0ZZZZZZP00000BR#WS) is used,
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
Wireless LAN can evaluated
- 1 channel USB Function and 1 channel USB Host can be evaluated
- In addition, CAN, RSPI, QSPI, etc. can be evaluated
See the RX65N RSK2MB website for further information about this board:
- https://www.renesas.com/br/en/products/software-tools/boards-and-kits/starter-kits/renesas-starter-kitplus-for-rx65n-2mb.html
Status/Open Issues
==================
Ethernet
---------
Run codespell -w against all files and fix the wrong correction
2020-02-22 19:31:14 +01:00
1.Observed instability in Link Management, due to difference in hardware design.(No Separate Interrupt line for PHY)
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
2.Currently tested only ping and udpblaster application.
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
3. Executed long run ping and udpblaster stress test for 12 hrs. Code is able to execute for 12hrs without any breakage.
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
Serial Console
==============
RX65N RSK2MB supports 12 serial ports (SCI0 - SCI12), however only 1 port can be tested(SCI8, which is the serial console). Only SCI8 port can be tested which is connected to USB Serial port.
Serial ports SCI1, SCI2, SCI9-SCI12, cannot be tested because they are multiplexed to other Rx65N controller interfaces.
Following SCI ports are configured w.r.t RX65N pin configuration
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
SCI1 Pin Configuration :
-----------
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
RX65N RSK2MB
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
Function
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
-----------
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
PF2 RXD1
PF1 TXD1
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
------------
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
SCI2 Pin Configuration :
-----------
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
RX65N RSK2MB
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
Function
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
-----------
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
P52 RXD2
P50 TXD2
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
------------
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
SCI8 Pin Configuration :
-----------
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
RX65N RSK2MB
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
Function
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
-----------
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
PJ1 RXD8
PJ2 TXD8
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
------------
Serial Connection Configuration
-------------------------------
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
1. RSK2MB board needs to be connected to PC, using USB cable(One end of which is connected to PC, other end
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
connected to USB serial port on H/W board).
2. RSK USB Serial Driver needs to be downloaded on PC side.
3. Configure Teraterm to 115200 baud.
LEDs
====
The RX65N RSK2MB board has 2 Power LED's(PowerLED5 LED_G, PowerLED3 LED_G) and 4 user LED's (LED_G, LED_O, LED_R, LED_R).
If enabled 4 User LED's are simply turned on when the board boots
successfully, and is blinking on panic / assertion failed.
Networking
==========
Ethernet Connections
--------------------
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
------ ---------
RX65N
RSK2MB Ethernet
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
Pin Function
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
------ ---------
PC4 ET0_TX_CLK
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
P76 ET0_RX_CLK
P80 ET0_TX_EN
PC6 ET0_ETXD3
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
PC5 ET0_ETXD2
P82 ET0_ETXD1
P81 ET0_ETXD0
PC3 ET0_TX_ER
PC2 ET0_RX_DV
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
PC0 ET0_ERXD3
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
PC1 ET0_ERXD2
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
P74 ET0_ERXD1
P75 ET0_ERXD0
P77 ET0_RX_ER
P83 ET0_CRS
PC7 ET0_COL
P72 ET0_MDC
P71 ET0_MDIO
P54 ET0_LINKSTA
------ ---------
NuttX Configurations
--------------------
The following configurations, need to be enabled for network.
CONFIG_RX65N_EMAC=y : Enable the EMAC Peripheral for RX65N
CONFIG_RX65N_EMAC0=y : Enable the EMAC Peripheral for RX65N
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
CONFIG_RX65N_EMAC0_PHYSR=30 : Address of PHY status register
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
CONFIG_RX65N_EMAC0_PHYSR_100FD=0x18 : Needed for PHY CHIP
CONFIG_RX65N_EMAC0_PHYSR_100HD=0x08 : " " " " " "
CONFIG_RX65N_EMAC0_PHYSR_10FD=0x14 : " " " " " "
CONFIG_RX65N_EMAC0_PHYSR_10HD=0x04 : " " " " " "
CONFIG_RX65N_EMAC0_PHYSR_ALTCONFIG=y : " " " " " "
CONFIG_RX65N_EMAC0_PHYSR_ALTMODE=0x1c : " " " " " "
CONFIG_RX65N_EMAC0_RMII=y
CONFIG_RX65N_EMAC0_PHYADDR=0 : PHY is at address 1
CONFIG_SCHED_WORKQUEUE=y : Work queue support is needed
CONFIG_SCHED_HPWORK=y : High Priority Work queue support
CONFIG_SCHED_LPWORK=y : Low Priority Work queue support
Using the network with NSH
--------------------------
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
The IP address is configured using DHCP, using the below mentioned configurations :
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
CONFIG_NETUTILS_DHCPC=y
CONFIG_NETUTILS_DHCPD=y
CONFIG_NSH_DHCPC=y
CONFIG_NETINIT_DHCPC=y
nsh> ifconfig
eth0 HWaddr 00:e0:de:ad:be:ef at UP
IPaddr:10.75.24.53 DRaddr:10.75.24.1 Mask:255.255.254.0
You can use ping to test for connectivity to the host (Careful,
Window firewalls usually block ping-related ICMP traffic). On the
target side, you can:
nsh> ping 10.75.24.250
PING 10.75.24.250 56 bytes of data
56 bytes from 10.75.24.250: icmp_seq=1 time=0 ms
56 bytes from 10.75.24.250: icmp_seq=2 time=0 ms
56 bytes from 10.75.24.250: icmp_seq=3 time=0 ms
56 bytes from 10.75.24.250: icmp_seq=4 time=0 ms
56 bytes from 10.75.24.250: icmp_seq=5 time=0 ms
56 bytes from 10.75.24.250: icmp_seq=6 time=0 ms
56 bytes from 10.75.24.250: icmp_seq=7 time=0 ms
56 bytes from 10.75.24.250: icmp_seq=8 time=0 ms
56 bytes from 10.75.24.250: icmp_seq=9 time=0 ms
56 bytes from 10.75.24.250: icmp_seq=10 time=0 ms
10 packets transmitted, 10 received, 0% packet loss, time 10100 ms
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
On the host side, you should also be able to ping the RX65N-RSK2MB:
$ ping 10.75.24.53
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
Configure UDP blaster application as mentioned below :
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
CONFIG_EXAMPLES_UDPBLASTER_HOSTIP=0x0a4b1801 (10.75.24.1) ------> Gateway IP
CONFIG_EXAMPLES_UDPBLASTER_NETMASK=0xfffffe00 (255.255.254.0) --------> Netmask
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
CONFIG_EXAMPLES_UDPBLASTER_TARGETIP=0x0a4b189b (10.75.24.155) ---------> Target IP
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
Debugging
==========
1. NuttX needs to be compiled in Cygwin environment on Windows.
The following Configuration needs to be set, in order to do source level debugging.
CONFIG_DEBUG_SYMBOLS = y (Set this option, using menuconfig only, DO NOT Enable this as default configuration).
2. Download & Install Renesas e2studio IDE
3. Load the project(NuttX built on Cygwin) as Makefile project with existing code
4. Right click on the project, and select Debug Configurations
5. The binary(NuttX) needs to be loaded using E1/E2 Emulator
6. Select the Device name as R5F565NE and Emulator as E1/E2(whichever is being used)
7. Select Connection type as JTAG
8. Load and run the binary
Flashing NuttX
===============
Alternativly, NuttX binary can be flashed using Renesas flash programmer tool without using e2 studio/Cygwin
Below are the steps mentioned to flash NuttX binary using Renesas flash programmer tool(RFP).
1.In order to flash using Renesas flash programmer tool, nuttx.mot file should be generated.
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
2. Add the following lines in tools/Makefile.unix file :
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
ifeq ($(CONFIG_MOTOROLA_SREC),y)
@echo "CP: $(NUTTXNAME).mot"
$(Q) $(OBJCOPY) $(OBJCOPYARGS) $(BIN) -O srec -I elf32-rx-be-ns $(NUTTXNAME).mot
endif
Remove exra whitespace from files (#189) * Remove multiple newlines at the end of files * Remove the whitespace from the end of lines
2020-01-31 16:15:01 +01:00
3. Add CONFIG_MOTOROLA_SREC=y in defconfig file or choose make menucofig->Build Setup-> Binary Output Format->
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
Select Motorola SREC format.
4. Download Renesas flash programmer tool from https://www.renesas.com/in/en/products/software-tools/tools/programmer/renesas-flash-programmer-programming-gui.html#downloads
Ensure all source code end with one and only one newline by this command: git ls-files -z | while IFS= read -rd '' f; do tail -c1 < "$f" | read -r _ || echo >> "$f"; done
2020-02-07 14:17:25 +01:00
5. Refer to the user manual document, for steps to flash NuttX binary using RFP tool.
Reference in New Issue Copy Permalink