sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
c076cb1bef
nuttx/boards/arm/stm32wl5/nucleo-wl55jc/configs/demo/defconfig

55 lines
1.7 KiB
Plaintext
Raw Normal View History

nucleo-wl55jc: add buttons and gpio interrupt support This patch adds to the nucleo-wl55jc previously implemented EXTI support. Button support with nuttx's button driver is added. I've written small example to show how to use GPIO EXTI. B3 button can be used (selectable via Kconfig) to toggle Red LED. I've added new defconfig for demo purposes. I've included there config and enabled example programs that are meant to demonstrate functions of the board and does not really have a place in real world project. Like Red LED can be toggled with B3 button, or LED example that flashes LEDS, or button example to show which button has been pressed. Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl> -- v1 -> v2: Suggested by: Petro Karashchenko - Change (1 << 0) to (1 << BUTTON1_BIT (and similar) v2 -> v3: - Fix invalid BUTTON3_BIT value v3 -> v4: Suggested by: Petro Karashchenko - Change 0/1 to false/true
2022-06-12 14:19:50 +02:00
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_STANDARD_SERIAL is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD="nucleo-wl55jc"
nucleo-wl55jc: add partition table support for progmem FLASH This patch adds working integration of progmem FLASH. User can partition internal FLASH memory to up to 4 partitions and use any combination of raw, nxffs, smartfs and mtd_config filesystems (unless there are other limitations like nxffs supports only single instance). Support for dual CPU is added to Kconfig to not overwrite CPU2 program code. Code guards user to not allocate more memory than there is on FLASH, and warns user if not all FLASH memory is used. Errors will be printed when user tries to initialize two instances of nxffs or mtd_config filesystems. Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
2022-06-14 01:11:33 +02:00
CONFIG_ARCH_BOARD_FLASH_CPU1_PROG_SIZE=116
CONFIG_ARCH_BOARD_FLASH_MOUNT=y
CONFIG_ARCH_BOARD_FLASH_PART1_MNT=""
CONFIG_ARCH_BOARD_FLASH_PART1_NAME="raw"
CONFIG_ARCH_BOARD_FLASH_PART2_FS_SMARTFS=y
CONFIG_ARCH_BOARD_FLASH_PART2_MNT="/mnt/smart"
CONFIG_ARCH_BOARD_FLASH_PART2_NAME="smartie"
CONFIG_ARCH_BOARD_FLASH_PART2_SIZE=8
CONFIG_ARCH_BOARD_FLASH_PART3_FS_NXFFS=y
CONFIG_ARCH_BOARD_FLASH_PART3_MNT="/mnt/nx"
CONFIG_ARCH_BOARD_FLASH_PART3_NAME="nxf"
CONFIG_ARCH_BOARD_FLASH_PART3_SIZE=2
CONFIG_ARCH_BOARD_FLASH_PART4_FS_MTDCONFIG=y
CONFIG_ARCH_BOARD_FLASH_PART4_MNT=""
CONFIG_ARCH_BOARD_FLASH_PART4_NAME="config"
CONFIG_ARCH_BOARD_FLASH_PART4_SIZE=1
nucleo-wl55jc: add buttons and gpio interrupt support This patch adds to the nucleo-wl55jc previously implemented EXTI support. Button support with nuttx's button driver is added. I've written small example to show how to use GPIO EXTI. B3 button can be used (selectable via Kconfig) to toggle Red LED. I've added new defconfig for demo purposes. I've included there config and enabled example programs that are meant to demonstrate functions of the board and does not really have a place in real world project. Like Red LED can be toggled with B3 button, or LED example that flashes LEDS, or button example to show which button has been pressed. Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl> -- v1 -> v2: Suggested by: Petro Karashchenko - Change (1 << 0) to (1 << BUTTON1_BIT (and similar) v2 -> v3: - Fix invalid BUTTON3_BIT value v3 -> v4: Suggested by: Petro Karashchenko - Change 0/1 to false/true
2022-06-12 14:19:50 +02:00
CONFIG_ARCH_BOARD_NUCLEO_WL55JC=y
CONFIG_ARCH_BOARD_NUCLEO_WL55JC_DEMO_LED_IRQ=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_CHIP="stm32wl5"
CONFIG_ARCH_CHIP_STM32WL55JC_CPU1=y
CONFIG_ARCH_CHIP_STM32WL5=y
CONFIG_ARCH_IRQBUTTONS=y
CONFIG_BUILTIN=y
CONFIG_EXAMPLES_BUTTONS=y
CONFIG_EXAMPLES_LEDS=y
CONFIG_INIT_ENTRYNAME="main"
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INPUT=y
CONFIG_INPUT_BUTTONS=y
CONFIG_INPUT_BUTTONS_LOWER=y
CONFIG_LPUART1_SERIAL_CONSOLE=y
nucleo-wl55jc: add partition table support for progmem FLASH This patch adds working integration of progmem FLASH. User can partition internal FLASH memory to up to 4 partitions and use any combination of raw, nxffs, smartfs and mtd_config filesystems (unless there are other limitations like nxffs supports only single instance). Support for dual CPU is added to Kconfig to not overwrite CPU2 program code. Code guards user to not allocate more memory than there is on FLASH, and warns user if not all FLASH memory is used. Errors will be printed when user tries to initialize two instances of nxffs or mtd_config filesystems. Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
2022-06-14 01:11:33 +02:00
CONFIG_MTD_CONFIG_NAMED=y
CONFIG_MTD_SMART_SECTOR_SIZE=2048
nucleo-wl55jc: add buttons and gpio interrupt support This patch adds to the nucleo-wl55jc previously implemented EXTI support. Button support with nuttx's button driver is added. I've written small example to show how to use GPIO EXTI. B3 button can be used (selectable via Kconfig) to toggle Red LED. I've added new defconfig for demo purposes. I've included there config and enabled example programs that are meant to demonstrate functions of the board and does not really have a place in real world project. Like Red LED can be toggled with B3 button, or LED example that flashes LEDS, or button example to show which button has been pressed. Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl> -- v1 -> v2: Suggested by: Petro Karashchenko - Change (1 << 0) to (1 << BUTTON1_BIT (and similar) v2 -> v3: - Fix invalid BUTTON3_BIT value v3 -> v4: Suggested by: Petro Karashchenko - Change 0/1 to false/true
2022-06-12 14:19:50 +02:00
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_RAM_SIZE=32768
CONFIG_RAM_START=0x20000000
CONFIG_RAW_BINARY=y
CONFIG_STM32WL5_LPUART1=y
nucleo-wl55jc: add partition table support for progmem FLASH This patch adds working integration of progmem FLASH. User can partition internal FLASH memory to up to 4 partitions and use any combination of raw, nxffs, smartfs and mtd_config filesystems (unless there are other limitations like nxffs supports only single instance). Support for dual CPU is added to Kconfig to not overwrite CPU2 program code. Code guards user to not allocate more memory than there is on FLASH, and warns user if not all FLASH memory is used. Errors will be printed when user tries to initialize two instances of nxffs or mtd_config filesystems. Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
2022-06-14 01:11:33 +02:00
CONFIG_SYSTEM_CFGDATA=y
nucleo-wl55jc: add buttons and gpio interrupt support This patch adds to the nucleo-wl55jc previously implemented EXTI support. Button support with nuttx's button driver is added. I've written small example to show how to use GPIO EXTI. B3 button can be used (selectable via Kconfig) to toggle Red LED. I've added new defconfig for demo purposes. I've included there config and enabled example programs that are meant to demonstrate functions of the board and does not really have a place in real world project. Like Red LED can be toggled with B3 button, or LED example that flashes LEDS, or button example to show which button has been pressed. Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl> -- v1 -> v2: Suggested by: Petro Karashchenko - Change (1 << 0) to (1 << BUTTON1_BIT (and similar) v2 -> v3: - Fix invalid BUTTON3_BIT value v3 -> v4: Suggested by: Petro Karashchenko - Change 0/1 to false/true
2022-06-12 14:19:50 +02:00
CONFIG_SYSTEM_NSH=y
CONFIG_USERLED=y
CONFIG_USERLED_LOWER=y
Reference in New Issue Copy Permalink