nuttx/boards/z16/z16f2811/z16f2800100zcog/scripts/Make.defs

############################################################################
# boards/z16f2800100zcog/scripts/Make.defs
#
#   Copyright (C) 2014, 2017 Gregory Nutt. All rights reserved.
#   Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with the
#    distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
#    used to endorse or promote products derived from this software
#    without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################

include $(TOPDIR)/.config
include $(TOPDIR)/tools/Config.mk

# These are the default directories where the ZDS-II toolchain is installed.
# NOTE that short 8.3 path names are used in order to avoid spaces.  On my
# machine I have:
#
# Versions 5.0.1
#   C:\PROGRA~1\ = C:\Program Files\
#   C:\PROGRA~2\ = C:\Program Files (x86)\
#
# Your PC may be configured differently.
#
# Version 5.2.1, the default install location is C:\ZiLOG

ifeq ($(CONFIG_Z16F_ZDSII_V511),y)
INSTALLROOT = C:/PROGRA~2/ZiLOG
ZDSVERSION := 5.0.1
else ifeq ($(CONFIG_Z16F_ZDSII_V521),y)
INSTALLROOT = C:/ZiLOG
ZDSVERSION := 5.2.1
endif

ifeq ($(CONFIG_WINDOWS_NATIVE),y)
  ZDSINSTALLDIR = $(INSTALLROOT)/ZDSII_ZNEO_$(ZDSVERSION)
  INSTALLDIR = ${shell echo $(ZDSINSTALLDIR)| sed -e "s/\//\\/g"}
  ZDSBINDIR = $(INSTALLDIR)\bin
  ZDSSTDINCDIR = $(INSTALLDIR)\include\std
  ZDSZILOGINCDIR = $(INSTALLDIR)\include\zilog
  ZDSSTDLIBDIR = $(INSTALLDIR)\lib\std
  ZDSZILOGLIBDIR = $(INSTALLDIR)\lib\zilog

  # CFLAGs

  ARCHASMINCLUDES = -include:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR)
  EARCHASMINCLUDES = -include:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR)
  ARCHSTDINCLUDES = -stdinc:$(TOPDIR)\include;$(ZDSSTDINCDIR);$(ZDSZILOGINCDIR)
  ARCHUSRINCLUDES = -usrinc:.
else
  WINTOOL = y
  ZDSINSTALLDIR = $(INSTALLROOT)/ZDSII_ZNEO_$(ZDSVERSION)
  INSTALLDIR = ${shell cygpath -u "$(ZDSINSTALLDIR)"}
  ZDSBINDIR = $(INSTALLDIR)/bin
  ZDSSTDINCDIR = $(INSTALLDIR)/include/std
  ZDSZILOGINCDIR = $(INSTALLDIR)/include/zilog
  ZDSSTDLIBDIR = $(INSTALLDIR)/lib/std
  ZDSZILOGLIBDIR = $(INSTALLDIR)/lib/zilog

  # These are the same directories but with the directory separator
  # character swapped as needed by the ZDS-II compiler

  WTOPDIR = ${shell cygpath -w "$(TOPDIR)"}
  WZDSSTDINCDIR = ${shell cygpath -w "$(ZDSSTDINCDIR)"}
  WZDSZILOGINCDIR = ${shell cygpath -w "$(ZDSZILOGINCDIR)"}
  WZDSSTDLIBDIR = ${shell cygpath -w "$(ZDSSTDLIBDIR)"}
  WZDSZILOGLIBDIR = ${shell cygpath -w "$(ZDSZILOGLIBDIR)"}

  # Escaped versions

  ETOPDIR = ${shell echo "$(WTOPDIR)" | sed -e "s/ /%20/g"}
  EZDSSTDINCDIR = ${shell echo "$(WZDSSTDINCDIR)" | sed -e "s/ /%20/g"}
  EZDSZILOGINCDIR = ${shell echo "$(WZDSZILOGINCDIR)" | sed -e "s/ /%20/g"}

  # CFLAGs

  ARCHASMINCLUDES = -include:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)'
  EARCHASMINCLUDES = -include:'$(ETOPDIR)\include;$(EZDSSTDINCDIR);$(EZDSZILOGINCDIR)'
  ARCHSTDINCLUDES = -stdinc:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)'
  ARCHUSRINCLUDES = -usrinc:'.'
endif

# Assembler definitions

ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
  ARCHASMOPTIMIZATION = -debug
else
  ARCHASMOPTIMIZATION = -nodebug
endif

ARCHASMCPUFLAGS = -cpu:Z16F2811AL -NOigcase
ARCHASMLIST = -NOlistmac -name -pagelen:56 -pagewidth:80 -quiet
ARCHASMWARNINGS = -warn
ARCHASMDEFINES = -define:_Z16F2811AL=1 -define:_Z16K_SERIES=1 -define:_Z16F_SERIES=1 -define:__ASSEMBLY__
AFLAGS = $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMLIST) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)

# Compiler definitions

ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
  ARCHOPTIMIZATION = -debug
else
  ARCHOPTIMIZATION = -nodebug
endif

ifeq ($(CONFIG_DEBUG_NOOPT),y)
  ARCHOPTIMIZATION += -NOregvar -reduceopt
else
  ARCHOPTIMIZATION += -regvar
endif

ARCHCPUFLAGS = -chartype:S -model:L -NOmodsect -cpu:Z16F2811AL -NOgenprint \
               -asmsw:" $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)"
ARCHLIST = -keeplst -NOlist -NOlistinc -NOkeepasm
ARCHPICFLAGS =
ARCHWARNINGS = -warn
ARCHDEFINES = -define:_Z16F2811AL -define:_Z16K_SERIES -define:_Z16F_SERIES
ARCHINCLUDES = $(ARCHSTDINCLUDES) $(ARCHUSRINCLUDES)
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHLIST) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)

CPPDEFINES = -D_Z16F2811AL -D_Z16K_SERIES -D_Z16F_SERIES -D__ASSEMBLY__
CPPINCLUDES = -I$(TOPDIR)$(DELIM)include
CPPFLAGS = $(CPPDEFINES) $(CPPINCLUDES)

# Librarian definitions

ARFLAGS = -quiet -warn

# Linker definitions

LINKCMDTEMPLATE = $(TOPDIR)$(DELIM)boards$(DELIM)$(CONFIG_ARCH_CHIP)$(DELIM)z16f2800100zcog$(DELIM)scripts$(DELIM)z16f2800100zcog.linkcmd

# Tool names/pathes

CROSSDEV =
CC = $(ZDSBINDIR)$(DELIM)zneocc.exe
CPP = gcc -E
LD = $(ZDSBINDIR)$(DELIM)zneolink.exe
AS = $(ZDSBINDIR)$(DELIM)zneoasm.exe
AR = $(ZDSBINDIR)$(DELIM)zneolib.exe

# File extensions

ASMEXT = .asm
OBJEXT = .obj
LIBEXT = .lib
EXEEXT = .hex

# These are the macros that will be used in the NuttX make system
# to compile and assembly source files and to insert the resulting
# object files into an archive

ifeq ($(CONFIG_WINDOWS_NATIVE),y)

define PREPROCESS
	@echo CPP: $1->$2
	$(Q) "$(CPP)" $(CPPFLAGS) $1 -o $2
endef

define COMPILE
	$(Q) "$(CC)" $(CFLAGS)  ${shell echo $1 | sed -e "s/\//\\/g"}
endef

define ASSEMBLE
	$(Q) "$(AS)" $(AFLAGS) ${shell echo $1 | sed -e "s/\//\\/g"}
endef

define MOVEOBJ
	$(call MOVEFILE, "$1.obj", "$2$(DELIM)$1.obj")
	$(call MOVEFILE, "$1.lst", "$2$(DELIM)$1.lst")
endef

define ARCHIVE
	@echo AR: $2
	$(Q) for %%G in ($(2)) do ( "$(AR)" $(ARFLAGS) $1=-+%%G )
endef

define CLEAN
	$(Q) if exist *.obj (del /f /q *.obj)
	$(Q) if exist *.src (del /f /q *.src)
	$(Q) if exist *.lib (del /f /q *.lib)
	$(Q) if exist *.hex (del /f /q *.hex)
	$(Q) if exist *.lod (del /f /q *.lod)
	$(Q) if exist *.lst (del /f /q *.lst)
endef

else

define PREPROCESS
	@echo "CPP: $1->$2"
	$(Q) "$(CPP)" $(CPPFLAGS) $1 -o $2
endef

define COMPILE
	$(Q) "$(CC)" $(CFLAGS) `cygpath -w "$1"`
endef

define ASSEMBLE
	$(Q) "$(AS)" $(AFLAGS) `cygpath -w "$1"`
endef

define MOVEOBJ
	$(call MOVEFILE, "$1.obj", "$2$(DELIM)$1.obj")
	$(call MOVEFILE, "$1.lst", "$2$(DELIM)$1.lst")
endef

define ARCHIVE
	$(Q) for __obj in $(2) ; do \
		echo "AR: $$__obj"; \
		"$(AR)" $(ARFLAGS) $1=-+$$__obj || { echo "$(AR) $1=-+$$__obj FAILED!" ; exit 1 ; } \
	done
endef

define CLEAN
	$(Q) rm -f *.obj *.src *.lib *.hex *.lod *.lst
endef
endif

# Windows native host tool definitions

ifeq ($(CONFIG_WINDOWS_NATIVE),y)
  HOSTCC = mingw32-gcc.exe
  HOSTINCLUDES = -I.
  HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
  HOSTLDFLAGS =
  HOSTEXEEXT = .exe

  # Windows-native host tools

  #MKDEP = $(TOPDIR)\tools\mkdeps.exe --winnative
  MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
else

# Linux/Cygwin host tool definitions

  HOSTCC = gcc
  HOSTINCLUDES = -I.
  HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
  HOSTLDFLAGS =

  # This is the tool to use for dependencies (i.e., none)

  MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh

  # ZDS-II cannot follow Cygwin soft links, so we will have to use directory copies

  DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
  DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
endif