nuttx/drivers/sensors/adxl345.h

176 lines
6.5 KiB
C
Raw Normal View History

/****************************************************************************
* drivers/sensors/adxl345.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __DRIVERS_SENSORS_ADXL345_H
#define __DRIVERS_SENSORS_ADXL345_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/wdog.h>
#include <nuttx/clock.h>
#include <nuttx/wqueue.h>
#include <nuttx/semaphore.h>
#include <nuttx/sensors/adxl345.h>
#if defined(CONFIG_SENSORS_ADXL345)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifdef CONFIG_ADXL345_I2C
# error "Only the ADXL345 SPI interface is supported by this driver"
#endif
/* Driver support ***********************************************************/
/* This format is used to construct the /dev/accel[n] device driver path.
* It defined here so that it will be used consistently in all places.
*/
#define DEV_FORMAT "/dev/accel%d"
#define DEV_NAMELEN 16
/* Driver flags */
#define ADXL345_STAT_INITIALIZED 1 /* Device has been initialized */
/****************************************************************************
* Public Types
****************************************************************************/
/* This defines type of events */
enum adxl345_event
{
DATA_READY = 0, /* New data available */
SINGLE_TAP, /* A tap event detected */
DOUBLE_TAP, /* A double tap event detected */
ACTIVITY, /* Activity detected */
INACTIVITY, /* Inactivity detected */
FREE_FAL, /* Free fall event */
WATERMARK, /* Number samples in FIFO is equal to sample bits */
OVERRUN, /* New data replaced unread data */
};
/* This defines operating mode */
enum adxl345_mode
{
BYPASS_MODE = 0, /* Bypass FIFO, then it remain empty */
FIFO_MODE, /* Sampled data are put in FIFO, up to 32 samples */
STREAM_MODE, /* Sampled data are put in FIFO, when full remove old samples */
TRIGGER_MODE /* Similar to Stream Mode, but when Trigger event happen FIFO freeze */
};
/* This structure describes the results of one ADXL345 sample */
struct adxl345_sample_s
{
uint16_t data_x; /* Measured X-axis acceleration */
uint16_t data_y; /* Measured Y-axis acceleration */
uint8_t data_z; /* Measured Z-axis acceleration */
};
/* This structure represents the state of the ADXL345 driver */
struct adxl345_dev_s
{
/* Common fields */
FAR struct adxl345_config_s *config; /* Board configuration data */
sem_t exclsem; /* Manages exclusive access to this structure */
#ifdef CONFIG_ADXL345_SPI
FAR struct spi_dev_s *spi; /* Saved SPI driver instance */
#else
FAR struct i2c_master_s *i2c; /* Saved I2C driver instance */
#endif
uint8_t status; /* See ADXL345_STAT_* definitions */
struct work_s work; /* Supports the interrupt handling "bottom half" */
#ifdef CONFIG_ADXL345_REFCNT
uint8_t crefs; /* Number of times the device has been opened */
#endif
uint8_t nwaiters; /* Number of threads waiting for ADXL345 data */
uint16_t ofsx; /* Offset X value */
uint16_t ofsy; /* Offset Y value */
uint16_t ofsz; /* Offset Z value */
sem_t waitsem; /* Used to wait for the availability of data */
struct work_s timeout; /* Supports timeout work */
struct adxl345_sample_s sample; /* Last sampled accelerometer data */
};
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: adxl345_getreg8
*
* Description:
* Read from an 8-bit ADXL345 register
*
****************************************************************************/
uint8_t adxl345_getreg8(FAR struct adxl345_dev_s *priv, uint8_t regaddr);
/****************************************************************************
* Name: adxl345_putreg8
*
* Description:
* Write a value to an 8-bit ADXL345 register
*
****************************************************************************/
void adxl345_putreg8(FAR struct adxl345_dev_s *priv,
uint8_t regaddr, uint8_t regval);
/****************************************************************************
* Name: adxl345_getreg16
*
* Description:
* Read 16-bits of data from an ADXL345 register
*
****************************************************************************/
uint16_t adxl345_getreg16(FAR struct adxl345_dev_s *priv, uint8_t regaddr);
/****************************************************************************
* Name: adxl345_accworker
*
* Description:
* Handle accelerometer interrupt events
* (this function actually executes in the context of the worker thread).
*
****************************************************************************/
void adxl345_accworker(FAR struct adxl345_dev_s *priv,
uint8_t intsta) weak_function;
#endif /* CONFIG_SENSORS_ADXL345 */
#endif /* __DRIVERS_SENSORS_ADXL345_H */