nuttx/boards/open1788/configs/knsh/Make.defs

115 lines
4.8 KiB
Plaintext
Raw Normal View History

############################################################################
# boards/open1788/configs/knsh/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-m$(DELIM)Toolchain.defs
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkwindeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
Merged in alinjerpelea/nuttx (pull request #963) Move boards to boards folder * boards: rename configs folder to boards This is the proposed layout after the change: boards: - folder containing board folders <board>: - name of each board drivers: - extra drivers specific for platform include: - header files for the boars scripts: - extra scripts specific for platform src: - board specific code tools: - extra tools specific for platform <config>: - board specific configuration(s) Note: <xxx> names are dependent on platform This is a logical change to aim to the arch layout but this is a huge change it should be done in several steps to lower the risk. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Kconfig: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile.*: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Make.defs: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .sh: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .mk: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .c & .h: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .bat: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 14:04:14 +02:00
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)boards$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}"
ARCHSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)boards$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel-space.ld}"
else
2014-04-14 00:22:22 +02:00
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT)
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
Merged in alinjerpelea/nuttx (pull request #963) Move boards to boards folder * boards: rename configs folder to boards This is the proposed layout after the change: boards: - folder containing board folders <board>: - name of each board drivers: - extra drivers specific for platform include: - header files for the boars scripts: - extra scripts specific for platform src: - board specific code tools: - extra tools specific for platform <config>: - board specific configuration(s) Note: <xxx> names are dependent on platform This is a logical change to aim to the arch layout but this is a huge change it should be done in several steps to lower the risk. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Kconfig: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile.*: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Make.defs: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .sh: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .mk: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .c & .h: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .bat: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 14:04:14 +02:00
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)boards$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
ARCHSCRIPT += -T$(TOPDIR)$(DELIM)boards$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel-space.ld
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
STRIP = $(CROSSDEV)strip --strip-unneeded
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
endif
ifneq ($(CONFIG_DEBUG_NOOPT),y)
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new
2015-09-01 18:02:36 +02:00
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
ASMEXT = .S
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
2015-09-01 18:02:36 +02:00
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
HOSTLDFLAGS =