nuttx/drivers/wireless/cc3000/socket.c

/*****************************************************************************
 *  socket.c  - CC3000 Host Driver Implementation.
 *  Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions
 *  are met:
 *
 *    Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 *    Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the
 *    distribution.
 *
 *    Neither the name of Texas Instruments Incorporated nor the names of
 *    its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *****************************************************************************/

/*****************************************************************************
 * Included Files
 *****************************************************************************/

#include <sys/types.h>
#include <sys/select.h>
#include <sys/time.h>

#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <errno.h>
#include <debug.h>
#include <stdlib.h>
#include <pthread.h>

#include <nuttx/wireless/cc3000/include/sys/socket.h>

#include "cc3000_socket.h"
#include "cc3000drv.h"
#include "cc3000.h"

/*****************************************************************************
 * Pre-processor Definitions
 *****************************************************************************/

#ifndef ARRAY_SIZE
#  define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#endif

#define waitlldbg(x,...) // lldbg

/****************************************************************************
 * Private Types
 ****************************************************************************/

/****************************************************************************
 * Private Function Prototypes
 ****************************************************************************/

/****************************************************************************
 * Public Data
 ****************************************************************************/

pthread_mutex_t g_cc3000_mut;

/****************************************************************************
 * Private Data
 ****************************************************************************/

static const int bsd2ti_types[] =
{
  CC3000_SOCK_STREAM,             /* SOCK_STREAM  */
  CC3000_SOCK_DGRAM,              /*  SOCK_DGRAM  */
  CC3000_SOCK_SEQPACKET,          /*  SOCK_SEQPACKET */
  CC3000_SOCK_RAW,                /*  SOCK_RAW    */
  CC3000_SOCK_RDM                 /*  SOCK_RDM */
};

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/*****************************************************************************
 * Name: socket
 *
 * Description:
 *   create an endpoint for communication. The socket function creates a
 *   socket that is bound to a specific transport service provider.  This
 *   function is called by the application layer to obtain a socket handle.
 *
 * Input Parameters:
 *   domain    selects the protocol family which will be used for
 *    communication. On this version only AF_INET is supported
 *   type      specifies the communication semantics. On this version
 *    only SOCK_STREAM, SOCK_DGRAM, SOCK_RAW are supported
 *   protocol  specifies a particular protocol to be used with the
 *    socket IPPROTO_TCP, IPPROTO_UDP or IPPROTO_RAW are
 *    supported.
 *
 * Returned Value:
 *   On success, socket handle that is used for consequent socket
 *    operations. On error, -1 is returned.
 *
 *****************************************************************************/

int cc3000_socket(int domain, int type, int protocol)
{
  int sd;

  if (type < SOCK_STREAM || type >= ARRAY_SIZE(bsd2ti_types))
    {
      errno = EPROTOTYPE;
      return -1;
    }

  switch (domain)
    {
    case AF_INET:
      domain = CC3000_AF_INET;
      break;

    case AF_INET6:
      domain = CC3000_AF_INET6;
      break;

    default:
      errno = EAFNOSUPPORT;
      return -1;
    }

  switch (protocol)
    {
      case CC3000_IPPROTO_IP:
      case CC3000_IPPROTO_ICMP:
      case CC3000_IPPROTO_TCP:
      case CC3000_IPPROTO_UDP:
      case CC3000_IPPROTO_IPV6:
      case CC3000_IPPROTO_NONE:
      case CC3000_IPPROTO_TX_TEST_RAW:
      case CC3000_IPPROTO_RAW:
      case CC3000_IPPROTO_MAX:
        break;

      default:
        errno = EPROTONOSUPPORT;
        return -1;
    }

  cc3000_lib_lock();
  type = bsd2ti_types[type];
  sd = cc3000_socket_impl(domain,type,protocol);
#ifdef CONFIG_CC3000_MT
  cc3000_add_socket(sd);
#endif
  cc3000_lib_unlock();
  return sd;
}

/*****************************************************************************
 * Name: closesocket
 *
 * Description:
 *   The socket function closes a created socket.
 *
 * Input Parameters:
 *   sockfd    socket handle.
 *
 * Returned Value:
 *   On success, zero is returned. On error, -1 is returned.
 *
 *****************************************************************************/

int cc3000_closesocket(int sockfd)
{
  int ret;

#ifdef CONFIG_CC3000_MT
  waitlldbg("remove\n");
  cc3000_remove_socket(sockfd);
#endif
  cc3000_lib_lock();
  waitlldbg("Call closesocketl\n");
  ret = cc3000_closesocket_impl(sockfd);
  waitlldbg("return closesocket\n");
  cc3000_lib_unlock();
  return ret;
}

/*****************************************************************************
 * Name: accept, cc3000_do_accept
 *
 * Description:
 *   accept a connection on a socket:
 *   This function is used with connection-based socket types
 *   (SOCK_STREAM). It extracts the first connection request on the
 *   queue of pending connections, creates a new connected socket, and
 *   returns a new file descriptor referring to that socket.
 *   The newly created socket is not in the listening state.
 *   The original socket sd is unaffected by this call.
 *   The argument sd is a socket that has been created with socket(),
 *   bound to a local address with bind(), and is  listening for
 *   connections after a listen(). The argument addr is a pointer
 *   to a sockaddr structure. This structure is filled in with the
 *   address of the peer socket, as known to the communications layer.
 *   The exact format of the address returned addr is determined by the
 *   socket's address family. The addrlen argument is a value-result
 *   argument: it should initially contain the size of the structure
 *   pointed to by addr, on return it will contain the actual
 *   length (in bytes) of the address returned.
 *
 * Input Parameters:
 *   sockfd  socket descriptor (handle)
 *   addr    the argument addr is a pointer to a sockaddr structure
 *           This structure is filled in with the address of the
 *           peer socket, as known to the communications layer.
 *           determined. The exact format of the address returned
 *           addr is by the socket's address sockaddr.
 *           On this version only AF_INET is supported.
 *           This argument returns in network order.
 *   addrlen The addrlen argument is a value-result argument:
 *           it should initially contain the size of the structure
 *            pointed to by addr.
 *
 * Returned Value:
 *   For socket in blocking mode:
 *    On success, socket handle. on failure negative
 *     For socket in non-blocking mode:
 *   - On connection establishment, socket handle
 *   - On connection pending, SOC_IN_PROGRESS (-2)
 *   - On failure, SOC_ERROR  (-1)
 *
 *****************************************************************************/

int cc3000_do_accept(int sockfd, struct sockaddr *addr, socklen_t *addrlen)
{
  int ret;

  cc3000_lib_lock();
  ret = cc3000_accept_impl(sockfd, addr, addrlen);
  cc3000_lib_unlock();
  return ret;
}

int cc3000_accept(int sockfd, struct sockaddr *addr, socklen_t *addrlen)
#ifdef CONFIG_CC3000_MT
{
  short non_blocking = CC3000_SOCK_ON;
  if (setsockopt(sockfd, CC3000_SOL_SOCKET, CC3000_SOCKOPT_ACCEPT_NONBLOCK,
                 &non_blocking, sizeof(non_blocking)) < 0)
   {
     ndbg("setsockopt failure %d\n", errno);
     return -errno;
   }

  memset(addr,0,*addrlen);
  return cc3000_accept_socket(sockfd,addr,addrlen);
}
#else
{
  cc3000_accept_socket(sockfd,0);
  short nonBlocking = CC3000_SOCK_OFF;

  if (setsockopt(sockfd, CC3000_SOL_SOCKET, CC3000_SOCKOPT_ACCEPT_NONBLOCK,
                 &nonBlocking, sizeof(nonBlocking)) < 0)
   {
     ndbg("setsockopt failure %d\n", errno);
     return -errno;
   }

  return cc3000_do_accept(int sockfd, addr, addrlen);;
}
#endif

/*****************************************************************************
 * Name: bind
 *
 * Description:
 *   assign a name to a socket
 *   This function gives the socket the local address addr.
 *   addr is addrlen bytes long. Traditionally, this is called when a
 *   socket is created with socket, it exists in a name space (address
 *   family) but has no name assigned.
 *   It is necessary to assign a local address before a SOCK_STREAM
 *   socket may receive connections.
 *
 * Input Parameters:
 *   sockfd  socket descriptor (handle)
 *   addr    specifies the destination address. On this version
 *    only AF_INET is supported.
 *   addrlen  contains the size of the structure pointed to by addr.
 *
 * Returned Value:
 *   On success, zero is returned. On error, -1 is returned.
 *
 *****************************************************************************/

int cc3000_bind(int sockfd, FAR const struct sockaddr *addr, socklen_t addrlen)
{
  int ret;

  cc3000_lib_lock();
  ret = cc3000_bind_impl(sockfd, addr, addrlen);
  cc3000_lib_unlock();
  return ret;
}

/*****************************************************************************
 * Name: listen
 *
 * Description:
 *   listen for connections on a socket
 *   The willingness to accept incoming connections and a queue
 *   limit for incoming connections are specified with listen(),
 *   and then the connections are accepted with accept.
 *   The listen() call applies only to sockets of type SOCK_STREAM
 *   The backlog parameter defines the maximum length the queue of
 *   pending connections may grow to.
 *
 * NOTE: On this version, backlog is not supported
 *
 * Input Parameters:
 *   sockfd  socket descriptor (handle)
 *   backlog  specifies the listen queue depth. On this version
 *    backlog is not supported.
 *
 * Returned Value:
 *   On success, zero is returned. On error, -1 is returned.
 *
 *****************************************************************************/

int cc3000_listen(int sockfd, int backlog)
{
  int ret;

  cc3000_lib_lock();
  ret = cc3000_listen_impl(sockfd,backlog);
  cc3000_lib_unlock();
  return ret;
}

/*****************************************************************************
 * Name: connect
 *
 * Description:
 *   initiate a connection on a socket
 *   Function connects the socket referred to by the socket descriptor
 *   sd, to the address specified by addr. The addrlen argument
 *   specifies the size of addr. The format of the address in addr is
 *   determined by the address space of the socket. If it is of type
 *   SOCK_DGRAM, this call specifies the peer with which the socket is
 *   to be associated; this address is that to which datagrams are to be
 *   sent, and the only address from which datagrams are to be received.
 *   If the socket is of type SOCK_STREAM, this call attempts to make a
 *   connection to another socket. The other socket is specified  by
 *   address, which is an address in the communications space of the
 *   socket. Note that the function implements only blocking behavior
 *   thus the caller will be waiting either for the connection
 *   establishment or for the connection establishment failure.
 *
 * Input Parameters:
 *   sockfd   socket descriptor (handle)
 *   addr     specifies the destination addr. On this version
 *     only AF_INET is supported.
 *   addrlen  contains the size of the structure pointed to by addr
 *
 * Returned Value:
 *   On success, zero is returned. On error, -1 is returned
 *
 *****************************************************************************/

int cc3000_connect(int sockfd, FAR const struct sockaddr *addr, socklen_t addrlen)
{
  int ret;

  cc3000_lib_lock();
  ret = cc3000_connect_impl(sockfd, addr, addrlen);
  cc3000_lib_unlock();
  return ret;
}

/*****************************************************************************
 * Name: select
 *
 * Description:
 *   Monitor socket activity
 *   Select allow a program to monitor multiple file descriptors,
 *   waiting until one or more of the file descriptors become
 *   "ready" for some class of I/O operation
 *
 * NOTE: If the timeout value set to less than 5ms it will automatically set
 *   to 5ms to prevent overload of the system
 *
 * Input Parameters:
 *   nfds       the highest-numbered file descriptor in any of the
 *     three sets, plus 1.
 *   readfds    socket descriptors list for read monitoring
 *   writefds   socket descriptors list for write monitoring
 *   exceptfds  socket descriptors list for exception monitoring
 *   timeout     is an upper bound on the amount of time elapsed
 *     before select() returns. Null means infinity
 *     timeout. The minimum timeout is 5 milliseconds,
 *    less than 5 milliseconds will be set
 *     automatically to 5 milliseconds.
 *
 * Returned Value:
 *   On success, select() returns the number of file descriptors
 *   contained in the three returned descriptor sets (that is, the
 *   total number of bits that are set in readfds, writefds,
 *   exceptfds) which may be zero if the timeout expires before
 *   anything interesting  happens.
 *   On error, -1 is returned.
 *   *readfds - return the sockets on which Read request will
 *     return without delay with valid data.
 *   *writefds - return the sockets on which Write request
 *     will return without delay.
 *   *exceptfds - return the sockets which closed recently.
 *
 *****************************************************************************/

int cc3000_select(int nfds, fd_set *readfds, fd_set *writefds,fd_set *exceptfds,
           struct timeval *timeout)
{
  int ret;

  cc3000_lib_lock();
  ret = cc3000_select_impl(nfds, (TICC3000fd_set *)readfds,
                           (TICC3000fd_set *)writefds,
                           (TICC3000fd_set *)exceptfds, timeout);
  cc3000_lib_unlock();
  return ret;
}

#ifndef CC3000_TINY_DRIVER
/*****************************************************************************
 * Name: setsockopt
 *
 * Description:
 *   set socket options
 *   This function manipulate the options associated with a socket.
 *   Options may exist at multiple protocol levels; they are always
 *   present at the uppermost socket level.
 *   When manipulating socket options the level at which the option
 *   resides and the name of the option must be specified.
 *   To manipulate options at the socket level, level is specified as
 *   SOL_SOCKET. To manipulate options at any other level the protocol
 *   number of the appropriate protocol controlling the option is
 *   supplied. For example, to indicate that an option is to be
 *   interpreted by the TCP protocol, level should be set to the
 *   protocol number of TCP;
 *   The parameters value and value_len are used to access value -
 *   use for setsockopt(). For getsockopt() they identify a buffer
 *   in which the value for the requested option(s) are to
 *   be returned. For getsockopt(), value_len is a value-result
 *   parameter, initially containing the size of the buffer
 *   pointed to by option_value, and modified on return to
 *   indicate the actual size of the value returned. If no option
 *   value is to be supplied or returned, option_value may be NULL.
 *
 * NOTE: On this version the following two socket options are enabled:
 *   The only protocol level supported in this version
 *   is SOL_SOCKET (level).
 *
 *     1. SOCKOPT_RECV_TIMEOUT (option)
 *        SOCKOPT_RECV_TIMEOUT configures recv and recvfrom timeout
 *        in milliseconds. In that case value should be pointer to
 *        unsigned long.
 *     2. SOCKOPT_NONBLOCK (option). sets the socket non-blocking mode on
 *        or off. In that case value should be SOCK_ON or SOCK_OFF (value).
 *
 * Input Parameters:
 *   sockfd      socket handle
 *   level       defines the protocol level for this option
 *   option      defines the option name to Interrogate
 *   value       specifies a value for the option
 *   value_len   specifies the length of the option value
 *
 * Returned Value:
 *   On success, zero is returned. On error, -1 is returned
 *
 *****************************************************************************/

int cc3000_setsockopt(int sockfd, int level, int option,
                      FAR const void *value, socklen_t value_len)
{
  int ret;

  cc3000_lib_lock();
  ret = cc3000_setsockopt_impl(sockfd, level, option, value, value_len);
  cc3000_lib_unlock();
  return ret;
}
#endif

/*****************************************************************************
 * Name: getsockopt
 *
 * Description:
 *   set socket options
 *   This function manipulate the options associated with a socket.
 *   Options may exist at multiple protocol levels; they are always
 *   present at the uppermost socket level.
 *   When manipulating socket options the level at which the option
 *   resides and the name of the option must be specified.
 *   To manipulate options at the socket level, level is specified as
 *   SOL_SOCKET. To manipulate options at any other level the protocol
 *   number of the appropriate protocol controlling the option is
 *   supplied. For example, to indicate that an option is to be
 *   interpreted by the TCP protocol, level should be set to the
 *   protocol number of TCP;
 *   The parameters value and value_len are used to access value -
 *   use for setsockopt(). For getsockopt() they identify a buffer
 *   in which the value for the requested option(s) are to
 *   be returned. For getsockopt(), value_len is a value-result
 *   parameter, initially containing the size of the buffer
 *   pointed to by option_value, and modified on return to
 *   indicate the actual size of the value returned. If no option
 *   value is to be supplied or returned, option_value may be NULL.
 *
 * NOTE: On this version the following two socket options are enabled:
 *    The only protocol level supported in this version
 *   is SOL_SOCKET (level).
 *    1. SOCKOPT_RECV_TIMEOUT (option)
 *     SOCKOPT_RECV_TIMEOUT configures recv and recvfrom timeout
 *    in milliseconds.
 *     In that case value should be pointer to unsigned long.
 *    2. SOCKOPT_NONBLOCK (option). sets the socket non-blocking mode on
 *    or off.
 *     In that case value should be SOCK_ON or SOCK_OFF (value).
 *
 * Input Parameters:
 *   sockfd      socket handle
 *   level       defines the protocol level for this option
 *   option      defines the option name to Interrogate
 *   value       specifies a value for the option
 *   value_len   specifies the length of the option value
 *
 * Returned Value:
 *   On success, zero is returned. On error, -1 is returned
 *
 *****************************************************************************/

int cc3000_getsockopt(int sockfd, int level, int option, FAR void *value,
                      FAR socklen_t *value_len)
{
  int ret;

  cc3000_lib_lock();
  ret = cc3000_getsockopt_impl(sockfd, level, option, value, value_len);
  cc3000_lib_unlock();
  return ret;
}

/*****************************************************************************
 * Name: recv
 *
 * Description:
 *     function receives a message from a connection-mode socket
 *
 * NOTE: On this version, only blocking mode is supported.
 *
 * Input Parameters:
 *   sockfd socket handle
 *   buf    Points to the buffer where the message should be stored
 *   len    Specifies the length in bytes of the buffer pointed to
 *     by the buffer argument.
 *   flags   Specifies the type of message reception.
 *     On this version, this parameter is not supported.
 *
 * Returned Value:
 *     Return the number of bytes received, or -1 if an error
 *     occurred
 *
 *****************************************************************************/

ssize_t cc3000_recv(int sockfd, FAR void *buf, size_t len, int flags)
{
  ssize_t ret;

#ifdef CONFIG_CC3000_MT
  waitlldbg("wait\n");
  ret = cc3000_wait_data(sockfd);
  waitlldbg("wait %d\n", ret);

  if (ret == -ECONNABORTED)
    {
      return 0;
    }

  if (ret != OK)
    {
      return -1;
    }
#endif

  cc3000_lib_lock();
  waitlldbg("recv\n");
  ret = cc3000_recv_impl(sockfd, buf, len, flags);
  waitlldbg("recv %d\n", ret);
  cc3000_lib_unlock();
  return ret;
}

/*****************************************************************************
 * Name: recvfrom
 *
 * Description:
 *    read data from socket
 *    function receives a message from a connection-mode or
 *    connectionless-mode socket. Note that raw sockets are not
 *    supported.
 *
 * NOTE: On this version, only blocking mode is supported.
 *
 * Input Parameters:
 *   sockfd socket handle
 *   buf    Points to the buffer where the message should be stored
 *   len    Specifies the length in bytes of the buffer pointed to
 *     by the buffer argument.
 *   flags   Specifies the type of message reception.
 *     On this version, this parameter is not supported.
 *   from   pointer to an address structure indicating the source
 *    address: sockaddr. On this version only AF_INET is
 *    supported.
 *   fromlen   source address tructure size
 *
 * Returned Value:
 *     Return the number of bytes received, or -1 if an error
 *     occurred
 *
 *****************************************************************************/

ssize_t cc3000_recvfrom(int sockfd, FAR void *buf, size_t len, int flags,
                        FAR struct sockaddr *from, FAR socklen_t *fromlen)
{
  ssize_t ret;

#ifdef CONFIG_CC3000_MT
  ret = cc3000_wait_data(sockfd);
  if (ret == -ECONNABORTED)
    {
      return 0;
    }

  if (ret != OK)
    {
      return -1;
    }
#endif

  cc3000_lib_lock();
  ret = cc3000_recvfrom_impl(sockfd, buf, len, flags, from, fromlen);
  cc3000_lib_unlock();
  return ret;
}

/*****************************************************************************
 * Name: send
 *
 * Description:
 *     Write data to TCP socket
 *     This function is used to transmit a message to another
 *     socket.
 *
 * NOTE: On this version, only blocking mode is supported.
 *
 * Input Parameters:
 *   sockfd   socket handle
 *   buf      Points to a buffer containing the message to be sent
 *   len      message size in bytes
 *   flags    On this version, this parameter is not supported
 *
 * Returned Value:
 *     Return the number of bytes transmitted, or -1 if an
 *     error occurred
 *
 *****************************************************************************/

ssize_t cc3000_send(int sockfd, FAR const void *buf, size_t len, int flags)
{
  ssize_t ret;

  cc3000_lib_lock();
  ret = cc3000_send_impl(sockfd, buf, len, flags);
  cc3000_lib_unlock();
  return ret;
}

/*****************************************************************************
 * Name: sendto
 *
 * Description:
 *     Write data to TCP socket
 *     This function is used to transmit a message to another
 *     socket.
 *
 * NOTE: On this version, only blocking mode is supported.
 *
 * Input Parameters:
 *   sockfd   socket handle
 *   buf      Points to a buffer containing the message to be sent
 *   len      message size in bytes
 *   flags    On this version, this parameter is not supported
 *   to       pointer to an address structure indicating the destination
 *     address: sockaddr. On this version only AF_INET is
 *     supported.
 *   tolen    destination address structure size
 *
 * Returned Value:
 *     Return the number of bytes transmitted, or -1 if an
 *     error occurred
 *
 *****************************************************************************/

ssize_t cc3000_sendto(int sockfd, FAR const void *buf, size_t len, int flags,
                      FAR const struct sockaddr *to, socklen_t tolen)
{
  ssize_t ret;

  cc3000_lib_lock();
  ret = cc3000_sendto_impl(sockfd, buf, len, flags, to, tolen);
  cc3000_lib_unlock();
  return ret;
}

/*****************************************************************************
 * Name: gethostbyname
 *
 * Description:
 *   Get host IP by name. Obtain the IP Address of machine on network,
 *   by its name.
 *
 * NOTE: On this version, only blocking mode is supported. Also note that
 *       the function requires DNS server to be configured prior to its
 *       usage.
 *
 * Input Parameters:
 *   hostname     host name
 *   usNameLen    name length
 *   out_ip_addr  This parameter is filled in with host IP address.
 *   In case that host name is not resolved,
 *   out_ip_addr is zero.
 *
 * Returned Value:
 *   On success, positive is returned. On error, negative is returned
 *
 *****************************************************************************/

#ifndef CC3000_TINY_DRIVER
// TODO: Standard is struct hostent *gethostbyname(const char *name);
int cc3000_gethostbyname(char * hostname, uint16_t usNameLen, unsigned long* out_ip_addr)
{
  int ret;

  cc3000_lib_lock();
  ret = cc3000_gethostbyname_impl(hostname, usNameLen, out_ip_addr);
  cc3000_lib_unlock();
  return ret;
}
#endif

/*****************************************************************************
 * Name: mdnsAdvertiser
 *
 * Description:
 *     Set CC3000 in mDNS advertiser mode in order to advertise itself.
 *
 * Input Parameters:
 *   mdnsEnabled             flag to enable/disable the mDNS feature
 *   deviceServiceName       Service name as part of the published
 *                           canonical domain name
 *   deviceServiceNameLength Length of the service name
 *
 * Returned Value:
 *   On success, zero is returned, return SOC_ERROR if socket was not
 *   opened successfully, or if an error occurred.
 *
 *****************************************************************************/

int cc3000_mdnsadvertiser(uint16_t mdnsEnabled, char *deviceServiceName,
                          uint16_t deviceServiceNameLength)

{
  int ret;

  cc3000_lib_lock();
  ret = cc3000_mdnsadvertiser_impl(mdnsEnabled, deviceServiceName, deviceServiceNameLength);
  cc3000_lib_unlock();
  return ret;
}