nuttx/arch/arm/src/imxrt/imxrt_wdog.c

402 lines
12 KiB
C
Raw Normal View History

This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
/****************************************************************************
* arch/arm/src/imxrt/imxrt_wdog.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
*
* http://www.apache.org/licenses/LICENSE-2.0
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
#include <assert.h>
#include <errno.h>
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
#include <nuttx/spinlock.h>
#include <nuttx/timers/watchdog.h>
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
#include "arm_arch.h"
#include "hardware/imxrt_wdog.h"
#include "imxrt_wdog.h"
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
#include <arch/board/board.h> /* Include last: has dependencies */
#if defined(CONFIG_WATCHDOG) && defined(CONFIG_IMXRT_WDOG)
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Select the path to the registered watchdog timer device */
#ifdef CONFIG_WATCHDOG_DEVPATH
#define DEVPATH CONFIG_WATCHDOG_DEVPATH
#else
#define DEVPATH "/dev/watchdog0"
#endif
/* Time out range is from 0 to 128 seconds in 0.5s intervals */
#define WDOG_MIN (500)
#define WDOG_MAX (128000)
#define WDOG_KEEP_ALIVE_KEY1 (0x5555u)
#define WDOG_KEEP_ALIVE_KEY2 (0xaaaau)
/****************************************************************************
* Private Types
****************************************************************************/
struct imxrt_wdog_lower
{
FAR const struct watchdog_ops_s *ops; /* Lower half operations */
uint32_t timeout;
uint32_t enabled;
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Timeout to register field helper */
uint32_t imxrt_wdog_ms_to_reg(uint32_t timeout);
/* Lower half driver methods */
static int imxrt_wdog_start(FAR struct watchdog_lowerhalf_s *lower);
static int imxrt_wdog_stop(FAR struct watchdog_lowerhalf_s *lower);
static int imxrt_wdog_keepalive(FAR struct watchdog_lowerhalf_s *lower);
static int imxrt_wdog_getstatus(FAR struct watchdog_lowerhalf_s *lower,
FAR struct watchdog_status_s *status);
static int imxrt_wdog_settimeout(FAR struct watchdog_lowerhalf_s *lower,
uint32_t timeout);
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
/****************************************************************************
* Private Data
****************************************************************************/
/* "Lower half" driver ops */
static const struct watchdog_ops_s g_wdgops =
{
.start = imxrt_wdog_start,
.stop = imxrt_wdog_stop,
.keepalive = imxrt_wdog_keepalive,
.getstatus = imxrt_wdog_getstatus,
.settimeout = imxrt_wdog_settimeout,
.capture = NULL,
.ioctl = NULL,
};
/* "Lower half" driver state */
static struct imxrt_wdog_lower g_wdgdev;
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: imxrt_wdog_ms_to_reg
*
* Description:
* Start the watchdog timer, resetting the time to the current timeout,
*
* Input Parameters:
* lower - A pointer the publicly visible representation of the
* lower-half driver state structure.
*
* Returned Values:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
uint32_t imxrt_wdog_ms_to_reg(uint32_t ms)
{
uint32_t reg = ms / 500; /* This gives the value needed for
* ms rounded up to the nearest 500ms of timeout
*/
if (reg != 0 && ms % 500 == 0)
{
/* If the number is divisible by 500ms we subtract 1.
* Else we will set the timeout to the smallest achievable timeout
* that is greater than the requested value.
*/
reg--;
}
return reg;
}
/****************************************************************************
* Name: imxrt_wdog
*
* Description:
* Start the watchdog timer, setting the time to the current timeout,
*
* Input Parameters:
* lower - A pointer the publicly visible representation of the
* lower-half driver state structure.
*
* Returned Values:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
static int imxrt_wdog_start(FAR struct watchdog_lowerhalf_s *lower)
{
FAR struct imxrt_wdog_lower *priv = (FAR struct imxrt_wdog_lower *)lower;
uint16_t regval;
if (priv->enabled == false)
{
priv->enabled = true;
regval = getreg16(IMXRT_WDOG1_WCR);
regval |= WDOG_WCR_WT(imxrt_wdog_ms_to_reg(priv->timeout));
putreg16(regval, IMXRT_WDOG1_WCR);
/* Now that the timeout field is properly set, start the watchdog. */
regval |= WDOG_WCR_WDE;
putreg16(regval, IMXRT_WDOG1_WCR);
}
return OK;
}
/****************************************************************************
* Name: imxrt_wdog_stop
*
* Description:
* Exists since it is a required function for the watchdog lower-half
* driver. On the IMXRT you cannot disable the watchdog once it is started.
*
* Input Parameters:
* lower - A pointer the publicly visible representation of the
* lower-half driver state structure.
*
* Returned Values:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
static int imxrt_wdog_stop(FAR struct watchdog_lowerhalf_s *lower)
{
FAR struct imxrt_wdog_lower *priv = (FAR struct imxrt_wdog_lower *)lower;
if (priv->enabled)
{
/* We cannot disable the watchdog once it is enabled. */
wderr("ERROR: Cannot stop Wdog once started\n");
return -ENOSYS;
}
return OK;
}
/****************************************************************************
* Name: imxrt_wdog_keepalive
*
* Description:
* Reset the watchdog timer to the current timeout value, prevent any
* imminent watchdog timeouts. This is sometimes referred as "pinging"
* the watchdog timer or "petting the dog".
*
* Input Parameters:
* lower - A pointer the publicly visible representation of the
* lower-half driver state structure.
*
* Returned Values:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
static int imxrt_wdog_keepalive(FAR struct watchdog_lowerhalf_s *lower)
{
irqstate_t flags = spin_lock_irqsave(NULL);
putreg16(WDOG_KEEP_ALIVE_KEY1, IMXRT_WDOG1_WSR);
putreg16(WDOG_KEEP_ALIVE_KEY2, IMXRT_WDOG1_WSR);
spin_unlock_irqrestore(NULL, flags);
return OK;
}
/****************************************************************************
* Name: imxrt_wdog_getstatus
*
* Description:
* Get the current watchdog timer status
*
* Input Parameters:
* lower - A pointer the publicly visible representation of the
* lower-half driver state structure.
* status - The location to return the watchdog status information.
*
* Returned Values:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
static int imxrt_wdog_getstatus(FAR struct watchdog_lowerhalf_s *lower,
FAR struct watchdog_status_s *status)
{
FAR struct imxrt_wdog_lower *priv = (FAR struct imxrt_wdog_lower *)lower;
status->flags = WDFLAGS_RESET;
if (priv->enabled)
{
status->flags |= WDFLAGS_ACTIVE;
}
status->timeout = priv->timeout;
status->timeleft = 0; /* not supported for WDOG1 */
return OK;
}
/****************************************************************************
* Name: imxrt_wdog_settimeout
*
* Description:
* Set a new timeout value (and reset the watchdog timer)
*
* Input Parameters:
* lower - A pointer the publicly visible representation of the
* "lower-half" driver state structure.
* timeout - The new timeout value in milliseconds.
*
* Returned Values:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
static int imxrt_wdog_settimeout(FAR struct watchdog_lowerhalf_s *lower,
uint32_t timeout)
{
uint32_t regval;
FAR struct imxrt_wdog_lower *priv = (FAR struct imxrt_wdog_lower *)lower;
if (timeout < WDOG_MIN || timeout > WDOG_MAX)
{
wderr("ERROR: Cannot represent timeout=%d. Range=[%d, %d]\n",
timeout, WDOG_MIN, WDOG_MAX);
return -ERANGE;
}
priv->timeout = timeout;
irqstate_t flags = spin_lock_irqsave(NULL);
/* write timer value to WCR WT register */
regval = getreg16(IMXRT_WDOG1_WCR);
regval &= ~WDOG_WCR_WT_MASK; /* clear previous count value */
regval |= WDOG_WCR_WT(priv->timeout);
putreg16(regval, IMXRT_WDOG1_WCR);
/* reload the Wdog counter by petting it */
putreg16(WDOG_KEEP_ALIVE_KEY1, IMXRT_WDOG1_WSR);
putreg16(WDOG_KEEP_ALIVE_KEY2, IMXRT_WDOG1_WSR);
spin_unlock_irqrestore(NULL, flags);
return OK;
}
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: imxrt_wdog_initialize
*
* Description:
* Initialize the watchdog time. The watchdog timer is initialized and
* registered at devpath. The initial state of the watchdog time is
* disabled.
*
* Input Parameters:
* None
*
* Returned Values:
* None
*
****************************************************************************/
void imxrt_wdog_initialize(void)
{
FAR struct imxrt_wdog_lower *priv = &g_wdgdev;
priv->ops = &g_wdgops;
priv->timeout = WDOG_MIN;
/* Register the watchdog driver at the path */
wdinfo("Entry: devpath=%s\n", DEVPATH);
watchdog_register(DEVPATH, (FAR struct watchdog_lowerhalf_s *)priv);
}
#endif /* CONFIG_WATCHDOG && CONFIG_IMXRT_WDOG */
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
/****************************************************************************
* Name: imxrt_wdog_disable
*
* Description:
* Disables all watchdogs
*
****************************************************************************/
void imxrt_wdog_disable_all(void)
{
uint32_t reg;
irqstate_t flags;
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
reg = getreg16(IMXRT_WDOG1_WCR);
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
if (reg & WDOG_WCR_WDE)
{
reg &= ~WDOG_WCR_WDE;
putreg16(reg, IMXRT_WDOG1_WCR);
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
}
reg = getreg16(IMXRT_WDOG2_WCR);
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
if (reg & WDOG_WCR_WDE)
{
reg &= ~WDOG_WCR_WDE;
putreg16(reg, IMXRT_WDOG2_WCR);
}
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
flags = enter_critical_section();
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
putreg32(RTWDOG_UPDATE_KEY, IMXRT_RTWDOG_CNT);
putreg32(0xffff, IMXRT_RTWDOG_TOVAL);
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
modifyreg32(IMXRT_RTWDOG_CS, RTWDOG_CS_EN, RTWDOG_CS_UPDATE);
leave_critical_section(flags);
This commit brings in basic support fo the i.MX RT 1050 'crossover' SoC. The basic support is complete and compiles without error, but is still untested. This port was the joing effort of Janne Rosberg, Ivan Ucherdzhiev, and myself. I give credit to Ivan for the kill because he is the one to held on to the end. Squashed commit of the following: Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk/scripts: Add section to linker script to handle the case where RAMFUNCs are enabled. RAMFUNCs appear to be enabled in the default configuration ... they probably should not be enabled. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: imxrt_lowputc.c is finished. Now everything needed for the initial port is done and ready for testing. arch/arm/src/imxrt: Add logic to imxrt_lowputc.c. Still incomplete. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Add serial support. configs/imxrt1050-evk: Add linker script. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Add initial cut at imxrt_allocateheap.c Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arm/arm/src/imxrt: Completes all definitions for PADMUX, CTLMUX, and IOMUX_INPUT and mapping tables on imxrt_gpio.c and imxr_iomuxc.c. arch/arm/src/imxrt/chip: Add definitions for IMXRT_PADCTL and IMXRT_PADMUX registers. Only the IMXRT_INPUT definitions in this commit. arch/arm/src/imxrt/chip: Add more IOMUXC register definitions. Author: Gregory Nutt <gnutt@nuttx.org> configs/imxrt1050-evk: Add STRIP definition to Make.defs. arch/arm/src/imxrt: Bring in i.MX6 memory configuration settings. arch/arm/src/imxrt: Remove call to non-existent imxrt_gpioinit() from imxrt_start.c. arch/arm/src/imxrt: Bring in incomplete imxrt_iomuxc.c file from i.mx6. arch/arm/src/imxrt: Add first cut at GPIO interrupt logic. arch/arm/include: Add definitions to support a second level of GPIO pin interrupts. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.c/.h Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Port SAMv7 interrupt logic to imxrt_irq.c. arch/arm/src/imxrt: More clarification of the start-up memory map. arch/arm/src/imxrt: Some mostly cosmetic clean-up to the imxrt_start.c file that was so rudely taken from the SAMv7. arch/arm/src/imxrt: Add imxrt_start.c. Initial commit is the the SAMv7 startup logic with name changes. Author: Ivan Ucherdzhiev <ivanucherdjiev@gmail.com> arch/arm/src/imxrt: Adds a few IOMUXC register definitions. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_clockconfig.c/.h configs/imxrt1050-evk: Add clock configuration definitions to board.h arch/arm/src/imxrt: Fix CCM register name; Fix doubly defined in LPUART bit field. arch/arm/src/imxrt: Add analog defines to CCM register definition header file. Author: Gregory Nutt <gnutt@nuttx.org> arch/arm/src/imxrt: Bring in GPIO C files from i.MX6. Things are in disarray now because that GPIO logic depends on IOMUXC logic which is not yet in place. arch/arm/src/imxrt: Add a few more GPIO definitions to make the header file compatible with i.MX6 arch/arm/src/imxrt/chip: Add GPIO register definition file. Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add DCDC register definitions. arch/arm/srch/imxrt: Add CCM register bit definitions Author: Gregory Nutt <gnutt@nuttx.org> Purely cosmetic arch/arm/src/imxrt: Add system reset controller register definition header file. Embarassingly trivial change left in compiler. arch/arm/src/imxrt: Finishes i.MX RT1050 LPUART register definition header file. arch/arm/src/imxrt: Beginning of an i.MX RT1050 LPUART register definition header file. Some trivial things Author: Janne Rosberg <janne.rosberg@offcode.fi> arch/arm/src/imxrt: Add imxrt_wdog.h arch/arm/src/imxrt: Add initial imxrt_ccm.h Author: Gregory Nutt <gnutt@nuttx.org> Trivial update to README. arch/arm/src/imxrt: The i.MX Rt implements 4 bits of interrupt priority, not two. Thanks, Janne. arch/arm/src/imxrt: Fix some initial compile issues. Still a long way from complete, but there is a buildable environment now for the imxrt1050-evk. configs/imxrt1050-evk: Add an initial NSH configuration for testing. configs/Kconfig: Hook the i.MX RT 1050 board configuration into the NuttX configuration system. configs/imxrt_evk: Add the framework for i.MX RT 1050 board support. arch/arm/src/imxrt: Bring in a few more files from LPC54xxx. arch/arm/src/imxrt: Bring in imxrt_clrpend() from the LPC54xxx. arch/arm/src/imxrt: Bring in Cortex-M7 SysTick setup from the SAMv7. arch/arm/src/imxrt: Add a few easy files. arch/arm/src/imxrt/chip: Add memory map header files. arch/arm/src/imxrt: A few basic files to start the port to the i.MX RT 1050.
2018-04-12 09:31:09 -06:00
}