nuttx/arch/avr/include/at32uc3/irq.h

637 lines
21 KiB
C
Raw Normal View History

/****************************************************************************
* arch/avr/include/at32uc3/irq.h
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* This file should never be included directed but, rather,
* only indirectly through nuttx/irq.h
*/
#ifndef __ARCH_AVR_INCLUDE_AT32UC3_IRQ_H
#define __ARCH_AVR_INCLUDE_AT32UC3_IRQ_H
/****************************************************************************
* Included Files
****************************************************************************/
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* Configuration CONFIG_AVR32_GPIOIRQ must be selected to enable the overall
* GPIO IRQ feature and CONFIG_AVR32_GPIOIRQSETA and/or
* CONFIG_AVR32_GPIOIRQSETB must be enabled to select GPIOs to support
* interrupts on.
*/
#ifndef CONFIG_AVR32_GPIOIRQ
# undef CONFIG_AVR32_GPIOIRQSETA
# undef CONFIG_AVR32_GPIOIRQSETB
#endif
2014-04-14 00:22:22 +02:00
/* IRQ numbers **************************************************************/
/* Events. These exclude:
*
* - The Reset event which vectors directly either to 0x8000:0000 (uc3a) or
* to 0xa000:0000 (uc3b).
* - The OCD stop from the OSD system
* - Autovectored interrupt requests
*
* Others vector relative to the contents of the EVBA register.
*/
#define AVR32_IRQ_UNREC 0 /* EVBA+0x00 Unrecoverable exception */
#define AVR32_IRQ_TLBMULT 1 /* EVBA+0x04 TLB multiple hit */
#define AVR32_IRQ_BUSDATA 2 /* EVBA+0x08 Bus error data fetch */
#define AVR32_IRQ_BUSINST 3 /* EVBA+0x0c Bus error instruction fetch */
#define AVR32_IRQ_NMI 4 /* EVBA+0x10 NMI */
#define AVR32_IRQ_INSTADDR 5 /* EVBA+0x14 Instruction Address */
#define AVR32_IRQ_ITLBPROT 6 /* EVBA+0x18 ITLB Protection */
#define AVR32_IRQ_BP 7 /* EVBA+0x1c Breakpoint */
#define AVR32_IRQ_INVINST 8 /* EVBA+0x20 Illegal Opcode */
#define AVR32_IRQ_UNIMPINST 9 /* EVBA+0x24 Unimplemented instruction */
#define AVR32_IRQ_PRIV 10 /* EVBA+0x28 Privilege violation */
#define AVR32_IRQ_FP 11 /* EVBA+0x2c Floating-point */
#define AVR32_IRQ_COP 12 /* EVBA+0x30 Coprocessor absent */
#define AVR32_IRQ_RDDATA 13 /* EVBA+0x34 Data Address (Read) */
#define AVR32_IRQ_WRDATA 14 /* EVBA+0x38 Data Address (Write) */
#define AVR32_IRQ_RDDTLBPROT 15 /* EVBA+0x3c DTLB Protection (Read) */
#define AVR32_IRQ_WRDTLBPROT 16 /* EVBA+0x40 DTLB Protection (Write) */
#define AVR32_IRQ_DLTBMOD 17 /* EVBA+0x44 DTLB Modified */
#define AVR32_IRQ_ITLBMISS 18 /* EVBA+0x50 ITLB Miss */
#define AVR32_IRQ_RDDTLB 19 /* EVBA+0x60 DTLB Miss (Read) */
#define AVR32_IRQ_WRDTLB 20 /* EVBA+0x70 DTLB Miss (Write) */
#define AVR32_IRQ_SUPER 21 /* EVBA+0x100 Supervisor call */
#define AVR32_IRQ_NEVENTS 22
/* "The INTC collects interrupt requests from the peripherals, prioritizes
* them, and delivers an interrupt request and an autovector to the CPU. The
* AVR32 architecture supports 4 priority levels for regular, maskable
* interrupts, and a Non-Maskable Interrupt (NMI)."
*
* "The INTC supports up to 64 groups of interrupts. Each group can have up
* to 32 interrupt request lines, these lines are connected to the peripherals.
* Each group has an Interrupt Priority Register (IPR) and an Interrupt Request
* Register (IRR). The IPRs are used to assign a priority level and an autovector
* to each group, and the IRRs are used to identify the active interrupt request
* within each group. If a group has only one interrupt request line, an active
* interrupt group uniquely identifies the active interrupt request line, and
* the corresponding IRR is not needed. The INTC also provides one Interrupt
* Cause Register (ICR) per priority level. These registers identify the group
* that has a pending interrupt of the corresponding priority level. If several
* groups have a pending interrupt of the same level, the group with the lowest
* number takes priority."
*/
/* Only 19 groups (0-18) are used with the AT32UC3A/B: */
#define AVR32_IRQ_INTPRIOS 4 /* 4 interrupt priorities */
#define AVR32_IRQ_MAXGROUPS 64 /* Architecture supports up to 64 groups */
#define AVR32_IRQ_NGROUPS 19 /* UC3 A/B support only 19 */
/* Group 0 */
#define AVR32_IRQ_BASEIRQGRP0 22
#define AVR32_IRQ_NREQGRP0 1
#define AVR32_IRQ_UC 22 /* 0 AVR32 UC CPU */
/* Group 1 */
#define AVR32_IRQ_BASEIRQGRP1 23
#define AVR32_IRQ_NREQGRP1 10
#define AVR32_IRQ_EIC0 23 /* 0 External Interrupt Controller 0 */
#define AVR32_IRQ_EIC1 24 /* 1 External Interrupt Controller 1 */
#define AVR32_IRQ_EIC2 25 /* 2 External Interrupt Controller 2 */
#define AVR32_IRQ_EIC3 26 /* 3 External Interrupt Controller 3 */
#define AVR32_IRQ_EIC4 27 /* 4 External Interrupt Controller 4 */
#define AVR32_IRQ_EIC5 28 /* 5 External Interrupt Controller 5 */
#define AVR32_IRQ_EIC6 29 /* 6 External Interrupt Controller 6 */
#define AVR32_IRQ_EIC7 30 /* 7 External Interrupt Controller 7 */
#define AVR32_IRQ_RTC 31 /* 8 Real Time Counter RTC */
#define AVR32_IRQ_PM 32 /* 9 Power Manager PM */
/* Group 2 */
#define AVR32_IRQ_BASEIRQGRP2 33
#define AVR32_IRQ_NREQGRP2 6
#define AVR32_IRQ_GPIO0 33 /* 0 General Purpose Input/Output Controller 0 */
#define AVR32_IRQ_GPIO1 34 /* 1 General Purpose Input/Output Controller 1 */
#define AVR32_IRQ_GPIO2 35 /* 2 General Purpose Input/Output Controller 2 */
#define AVR32_IRQ_GPIO3 36 /* 3 General Purpose Input/Output Controller 3 */
#define AVR32_IRQ_GPIO4 37 /* 4 General Purpose Input/Output Controller 4 */
#define AVR32_IRQ_GPIO5 38 /* 5 General Purpose Input/Output Controller 5 */
/* Group 3 */
#define AVR32_IRQ_BASEIRQGRP3 39
#define AVR32_IRQ_NREQGRP3 7
#define AVR32_IRQ_PDCA0 39 /* 0 Peripheral DMA Controller 0 */
#define AVR32_IRQ_PDCA1 40 /* 1 Peripheral DMA Controller 1 */
#define AVR32_IRQ_PDCA2 41 /* 2 Peripheral DMA Controller 2 */
#define AVR32_IRQ_PDCA3 42 /* 3 Peripheral DMA Controller 3 */
#define AVR32_IRQ_PDCA4 43 /* 4 Peripheral DMA Controller 4 */
#define AVR32_IRQ_PDCA5 44 /* 5 Peripheral DMA Controller 5 */
#define AVR32_IRQ_PDCA6 45 /* 6 Peripheral DMA Controller 6 */
/* Group 4 */
#define AVR32_IRQ_BASEIRQGRP4 46
#define AVR32_IRQ_NREQGRP4 1
#define AVR32_IRQ_FLASHC 46 /* 0 Flash Controller */
/* Group 5 */
#define AVR32_IRQ_BASEIRQGRP5 47
#define AVR32_IRQ_NREQGRP5 1
#define AVR32_IRQ_USART0 47 /* 0 Universal Synchronous/Asynchronous
* Receiver/Transmitter 0 */
/* Group 6 */
#define AVR32_IRQ_BASEIRQGRP6 48
#define AVR32_IRQ_NREQGRP6 1
#define AVR32_IRQ_USART1 48 /* 0 Universal Synchronous/Asynchronous
* Receiver/Transmitter 1 */
/* Group 7 */
#define AVR32_IRQ_BASEIRQGRP7 49
#define AVR32_IRQ_NREQGRP7 1
#define AVR32_IRQ_USART2 49 /* 0 Universal Synchronous/Asynchronous
* Receiver/Transmitter 2 */
#define AVR32_IRQ_BASEIRQGRP8 50
#define AVR32_IRQ_NREQGRP8 0
/* Group 9 */
#define AVR32_IRQ_BASEIRQGRP9 50
#define AVR32_IRQ_NREQGRP9 1
#define AVR32_IRQ_SPI 50 /* 0 Serial Peripheral Interface */
#define AVR32_IRQ_BASEIRQGRP10 51
#define AVR32_IRQ_NREQGRP10 0
/* Group 11 */
#define AVR32_IRQ_BASEIRQGRP11 51
#define AVR32_IRQ_NREQGRP11 1
#define AVR32_IRQ_TWI 51 /* 0 Two-wire Interface TWI */
/* Group 12 */
#define AVR32_IRQ_BASEIRQGRP12 52
#define AVR32_IRQ_NREQGRP12 1
#define AVR32_IRQ_PWM 52 /* 0 Pulse Width Modulation Controller */
/* Group 13 */
#define AVR32_IRQ_BASEIRQGRP13 53
#define AVR32_IRQ_NREQGRP13 1
#define AVR32_IRQ_SSC 53 /* 0 Synchronous Serial Controller */
/* Group 14 */
#define AVR32_IRQ_BASEIRQGRP14 54
#define AVR32_IRQ_NREQGRP14 3
#define AVR32_IRQ_TC0 54 /* 0 Timer/Counter 0 */
#define AVR32_IRQ_TC1 55 /* 1 Timer/Counter 1 */
#define AVR32_IRQ_TC2 56 /* 2 Timer/Counter 2 */
/* Group 15 */
#define AVR32_IRQ_BASEIRQGRP15 57
#define AVR32_IRQ_NREQGRP15 1
#define AVR32_IRQ_ADC 57 /* 0 Analog to Digital Converter */
#define AVR32_IRQ_BASEIRQGRP16 58
#define AVR32_IRQ_NREQGRP16 0
/* Group 17 */
#define AVR32_IRQ_BASEIRQGRP17 58
#define AVR32_IRQ_NREQGRP17 1
#define AVR32_IRQ_USBB 58 /* 0 USB 2.0 Interface USBB */
/* Group 18 */
#define AVR32_IRQ_BASEIRQGRP18 59
#define AVR32_IRQ_NREQGRP18 1
#define AVR32_IRQ_ABDAC 59 /* 0 Audio Bitstream DAC */
/* Total number of IRQ numbers */
#define AVR32_IRQ_BADVECTOR 60 /* Not a real IRQ number */
#define NR_IRQS 60
/* GPIO IRQ Numbers *********************************************************/
/* These numbers correspond to GPIO port numbers that have interrupts
* enabled. These are all decoded by the AVR32_IRQ_GPIO interrupt handler.
* A lot of effort was made here to keep the number of IRQs to a minimum
* since it will correspond to various, internal table sizes.
*/
/* Up to 32 GPIO interrupts in PORTA0-31 */
#define __IRQ_GPPIO_PA0 0
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00000001) != 0
# define AVR32_IRQ_GPIO_PA0 __IRQ_GPPIO_PA0
# define __IRQ_GPIO_PA1 (__IRQ_GPPIO_PA0+1)
2014-04-14 00:22:22 +02:00
#else
# define __IRQ_GPIO_PA1 __IRQ_GPPIO_PA0
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00000002) != 0
# define AVR32_IRQ_GPIO_PA1 __IRQ_GPIO_PA1
# define __IRQ_GPIO_PA2 (__IRQ_GPIO_PA1+1)
#else
# define __IRQ_GPIO_PA2 __IRQ_GPIO_PA1
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00000004) != 0
# define AVR32_IRQ_GPIO_PA2 __IRQ_GPIO_PA2
# define __IRQ_GPIO_PA3 (__IRQ_GPIO_PA2+1)
#else
# define __IRQ_GPIO_PA3 __IRQ_GPIO_PA2
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00000008) != 0
# define AVR32_IRQ_GPIO_PA3 __IRQ_GPIO_PA3
# define __IRQ_GPIO_PA4 (__IRQ_GPIO_PA3+1)
#else
# define __IRQ_GPIO_PA4 __IRQ_GPIO_PA3
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00000010) != 0
# define AVR32_IRQ_GPIO_PA4 __IRQ_GPIO_PA4
# define __IRQ_GPIO_PA5 (__IRQ_GPIO_PA4+1)
#else
# define __IRQ_GPIO_PA5 __IRQ_GPIO_PA4
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00000020) != 0
# define AVR32_IRQ_GPIO_PA5 __IRQ_GPIO_PA5
# define __IRQ_GPIO_PA6 (__IRQ_GPIO_PA5+1)
#else
# define __IRQ_GPIO_PA6 __IRQ_GPIO_PA5
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00000040) != 0
# define AVR32_IRQ_GPIO_PA6 __IRQ_GPIO_PA6
# define __IRQ_GPIO_PA7 (__IRQ_GPIO_PA6+1)
#else
# define __IRQ_GPIO_PA7 __IRQ_GPIO_PA6
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00000080) != 0
# define AVR32_IRQ_GPIO_PA7 __IRQ_GPIO_PA7
# define __IRQ_GPIO_PA8 (__IRQ_GPIO_PA7+1)
#else
# define __IRQ_GPIO_PA8 __IRQ_GPIO_PA7
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00000100) != 0
# define AVR32_IRQ_GPIO_PA8 __IRQ_GPIO_PA8
# define __IRQ_GPIO_PA9 (__IRQ_GPIO_PA8+1)
#else
# define __IRQ_GPIO_PA9 __IRQ_GPIO_PA8
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00000200) != 0
# define AVR32_IRQ_GPIO_PA9 __IRQ_GPIO_PA9
# define __IRQ_GPIO_PA10 (__IRQ_GPIO_PA9+1)
#else
# define __IRQ_GPIO_PA10 __IRQ_GPIO_PA9
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00000400) != 0
# define AVR32_IRQ_GPIO_PA10 __IRQ_GPIO_PA10
# define __IRQ_GPIO_PA11 (__IRQ_GPIO_PA10+1)
#else
# define __IRQ_GPIO_PA11 __IRQ_GPIO_PA10
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00000800) != 0
# define AVR32_IRQ_GPIO_PA11 __IRQ_GPIO_PA11
# define __IRQ_GPIO_PA12 (__IRQ_GPIO_PA11+1)
#else
# define __IRQ_GPIO_PA12 __IRQ_GPIO_PA11
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00001000) != 0
# define AVR32_IRQ_GPIO_PA12 __IRQ_GPIO_PA12
# define __IRQ_GPIO_PA13 (__IRQ_GPIO_PA12+1)
#else
# define __IRQ_GPIO_PA13 __IRQ_GPIO_PA12
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00002000) != 0
# define AVR32_IRQ_GPIO_PA13 __IRQ_GPIO_PA13
# define __IRQ_GPIO_PA14 (__IRQ_GPIO_PA13+1)
#else
# define __IRQ_GPIO_PA14 __IRQ_GPIO_PA13
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00004000) != 0
# define AVR32_IRQ_GPIO_PA14 __IRQ_GPIO_PA14
# define __IRQ_GPIO_PA15 (__IRQ_GPIO_PA14+1)
#else
# define __IRQ_GPIO_PA15 __IRQ_GPIO_PA14
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00008000) != 0
# define AVR32_IRQ_GPIO_PA15 __IRQ_GPIO_PA15
# define __IRQ_GPIO_PA16 (__IRQ_GPIO_PA15+1)
#else
# define __IRQ_GPIO_PA16 __IRQ_GPIO_PA15
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00010000) != 0
# define AVR32_IRQ_GPIO_PA16 __IRQ_GPIO_PA16
# define __IRQ_GPIO_PA17 (__IRQ_GPIO_PA16+1)
#else
# define __IRQ_GPIO_PA17 __IRQ_GPIO_PA16
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00020000) != 0
# define AVR32_IRQ_GPIO_PA17 __IRQ_GPIO_PA17
# define __IRQ_GPIO_PA18 (__IRQ_GPIO_PA17+1)
#else
# define __IRQ_GPIO_PA18 __IRQ_GPIO_PA17
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00040000) != 0
# define AVR32_IRQ_GPIO_PA18 __IRQ_GPIO_PA18
# define __IRQ_GPIO_PA19 (__IRQ_GPIO_PA18+1)
#else
# define __IRQ_GPIO_PA19 __IRQ_GPIO_PA18
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00080000) != 0
# define AVR32_IRQ_GPIO_PA19 __IRQ_GPIO_PA19
# define __IRQ_GPIO_PA20 (__IRQ_GPIO_PA19+1)
#else
# define __IRQ_GPIO_PA20 __IRQ_GPIO_PA19
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00100000) != 0
# define AVR32_IRQ_GPIO_PA20 __IRQ_GPIO_PA20
# define __IRQ_GPIO_PA21 (__IRQ_GPIO_PA20+1)
#else
# define __IRQ_GPIO_PA21 __IRQ_GPIO_PA20
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00200000) != 0
# define AVR32_IRQ_GPIO_PA21 __IRQ_GPIO_PA21
# define __IRQ_GPIO_PA22 (__IRQ_GPIO_PA21+1)
#else
# define __IRQ_GPIO_PA22 __IRQ_GPIO_PA21
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00400000) != 0
# define AVR32_IRQ_GPIO_PA22 __IRQ_GPIO_PA22
# define __IRQ_GPIO_PA23 (__IRQ_GPIO_PA22+1)
#else
# define __IRQ_GPIO_PA23 __IRQ_GPIO_PA22
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x00800000) != 0
# define AVR32_IRQ_GPIO_PA23 __IRQ_GPIO_PA23
# define __IRQ_GPIO_PA24 (__IRQ_GPIO_PA23+1)
#else
# define __IRQ_GPIO_PA24 __IRQ_GPIO_PA23
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x01000000) != 0
# define AVR32_IRQ_GPIO_PA24 __IRQ_GPIO_PA24
# define __IRQ_GPIO_PA25 (__IRQ_GPIO_PA24+1)
#else
# define __IRQ_GPIO_PA25 __IRQ_GPIO_PA24
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x02000000) != 0
# define AVR32_IRQ_GPIO_PA25 __IRQ_GPIO_PA25
# define __IRQ_GPIO_PA26 (__IRQ_GPIO_PA25+1)
#else
# define __IRQ_GPIO_PA26 __IRQ_GPIO_PA25
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x04000000) != 0
# define AVR32_IRQ_GPIO_PA26 __IRQ_GPIO_PA26
# define __IRQ_GPIO_PA27 (__IRQ_GPIO_PA26+1)
#else
# define __IRQ_GPIO_PA27 __IRQ_GPIO_PA26
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x08000000) != 0
# define AVR32_IRQ_GPIO_PA27 __IRQ_GPIO_PA27
# define __IRQ_GPIO_PA28 (__IRQ_GPIO_PA27+1)
#else
# define __IRQ_GPIO_PA28 __IRQ_GPIO_PA27
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x10000000) != 0
# define AVR32_IRQ_GPIO_PA28 __IRQ_GPIO_PA28
# define __IRQ_GPIO_PA29 (__IRQ_GPIO_PA28+1)
#else
# define __IRQ_GPIO_PA29 __IRQ_GPIO_PA28
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x20000000) != 0
# define AVR32_IRQ_GPIO_PA29 __IRQ_GPIO_PA29
# define __IRQ_GPIO_PA30 (__IRQ_GPIO_PA29+1)
#else
# define __IRQ_GPIO_PA30 __IRQ_GPIO_PA29
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x40000000) != 0
# define AVR32_IRQ_GPIO_PA30 __IRQ_GPIO_PA30
# define __IRQ_GPIO_PA31 (__IRQ_GPIO_PA30+1)
#else
# define __IRQ_GPIO_PA31 __IRQ_GPIO_PA30
#endif
#if (CONFIG_AVR32_GPIOIRQSETA & 0x80000000) != 0
# define AVR32_IRQ_GPIO_PA31 __IRQ_GPIO_PA31
# define __IRQ_GPIO_PB0 (__IRQ_GPIO_PA31+1)
#else
# define __IRQ_GPIO_PB0 __IRQ_GPIO_PA31
#endif
/* Up to 12 GPIO interrupts in PORTB0-11 */
#if (CONFIG_AVR32_GPIOIRQSETB & 0x00000001) != 0
# define AVR32_IRQ_GPIO_PB0 __IRQ_GPIO_pb0
# define __IRQ_GPIO_PB1 (__IRQ_GPIO_PB0+1)
#else
# define __IRQ_GPIO_PB1 __IRQ_GPIO_PB0
#endif
#if (CONFIG_AVR32_GPIOIRQSETB & 0x00000002) != 0
# define AVR32_IRQ_GPIO_PB1 __IRQ_GPIO_PB1
# define __IRQ_GPIO_PB2 (__IRQ_GPIO_PB1+1)
#else
# define __IRQ_GPIO_PB2 __IRQ_GPIO_PB1
#endif
#if (CONFIG_AVR32_GPIOIRQSETB & 0x00000004) != 0
# define AVR32_IRQ_GPIO_PB2 __IRQ_GPIO_PB2
# define __IRQ_GPIO_PB3 (__IRQ_GPIO_PB2+1)
#else
# define __IRQ_GPIO_PB3 __IRQ_GPIO_PB2
#endif
#if (CONFIG_AVR32_GPIOIRQSETB & 0x00000008) != 0
# define AVR32_IRQ_GPIO_PB3 __IRQ_GPIO_PB3
# define __IRQ_GPIO_PB4 (__IRQ_GPIO_PB3+1)
#else
# define __IRQ_GPIO_PB4 __IRQ_GPIO_PB3
#endif
#if (CONFIG_AVR32_GPIOIRQSETB & 0x00000010) != 0
# define AVR32_IRQ_GPIO_PB4 __IRQ_GPIO_PB4
# define __IRQ_GPIO_PB5 (__IRQ_GPIO_PB4+1)
#else
# define __IRQ_GPIO_PB5 __IRQ_GPIO_PB4
#endif
#if (CONFIG_AVR32_GPIOIRQSETB & 0x00000020) != 0
# define AVR32_IRQ_GPIO_PB5 __IRQ_GPIO_PB5
# define __IRQ_GPIO_PB6 (__IRQ_GPIO_PB5+1)
#else
# define __IRQ_GPIO_PB6 __IRQ_GPIO_PB5
#endif
#if (CONFIG_AVR32_GPIOIRQSETB & 0x00000040) != 0
# define AVR32_IRQ_GPIO_PB6 __IRQ_GPIO_PB6
# define __IRQ_GPIO_PB7 (__IRQ_GPIO_PB6+1)
#else
# define __IRQ_GPIO_PB7 __IRQ_GPIO_PB6
#endif
#if (CONFIG_AVR32_GPIOIRQSETB & 0x00000080) != 0
# define AVR32_IRQ_GPIO_PB7 __IRQ_GPIO_PB7
# define __IRQ_GPIO_PB8 (__IRQ_GPIO_PB7+1)
#else
# define __IRQ_GPIO_PB8 __IRQ_GPIO_PB7
#endif
#if (CONFIG_AVR32_GPIOIRQSETB & 0x00000100) != 0
# define AVR32_IRQ_GPIO_PB8 __IRQ_GPIO_PB8
# define __IRQ_GPIO_PB9 (__IRQ_GPIO_PB8+1)
#else
# define __IRQ_GPIO_PB9 __IRQ_GPIO_PB8
#endif
#if (CONFIG_AVR32_GPIOIRQSETB & 0x00000200) != 0
# define AVR32_IRQ_GPIO_PB9 __IRQ_GPIO_PB9
# define __IRQ_GPIO_PB10 (__IRQ_GPIO_PB9+1)
#else
# define __IRQ_GPIO_PB10 __IRQ_GPIO_PB9
#endif
#if (CONFIG_AVR32_GPIOIRQSETB & 0x00000400) != 0
# define AVR32_IRQ_GPIO_PB10 __IRQ_GPIO_PB10
# define __IRQ_GPIO_PB11 (__IRQ_GPIO_PB10+1)
#else
# define __IRQ_GPIO_PB11 __IRQ_GPIO_PB10
#endif
#if (CONFIG_AVR32_GPIOIRQSETB & 0x00000800) != 0
# define AVR32_IRQ_GPIO_PB11 __IRQ_GPIO_PB11
# define __IRQ_GPIO_PB12 (__IRQ_GPIO_PB11+1)
#else
# define __IRQ_GPIO_PB12 __IRQ_GPIO_PB11
#endif
#ifdef CONFIG_AVR32_GPIOIRQ
# define NR_GPIO_IRQS __IRQ_GPIO_PB12
#else
# define NR_GPIO_IRQS 0
#endif
/****************************************************************************
* Public Types
****************************************************************************/
/****************************************************************************
* Inline functions
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifndef __ASSEMBLY__
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif
#endif /* __ARCH_AVR_INCLUDE_AT32UC3_IRQ_H */