268 lines
10 KiB
C
268 lines
10 KiB
C
|
/************************************************************************************
|
||
|
|
* configs/cc3200/include/board.h
|
||
|
|
* include/arch/board/board.h
|
||
|
|
*
|
||
|
|
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||
|
|
* Authors: Gregory Nutt <gnutt@nuttx.org>
|
||
|
|
* Jim Ewing <jim@droidifi.com>
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without
|
||
|
|
* modification, are permitted provided that the following conditions
|
||
|
|
* are met:
|
||
|
|
*
|
||
|
|
* 1. Redistributions of source code must retain the above copyright
|
||
|
|
* notice, this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||
|
|
* notice, this list of conditions and the following disclaimer in
|
||
|
|
* the documentation and/or other materials provided with the
|
||
|
|
* distribution.
|
||
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||
|
|
* used to endorse or promote products derived from this software
|
||
|
|
* without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*
|
||
|
|
************************************************************************************/
|
||
|
|
|
||
|
|
#ifndef __CONFIGS_CC3200_LAUNCHPAD_INCLUDE_BOARD_H
|
||
|
|
#define __CONFIGS_CC3200_LAUNCHPAD_INCLUDE_BOARD_H
|
||
|
|
|
||
|
|
/************************************************************************************
|
||
|
|
* Included Files
|
||
|
|
************************************************************************************/
|
||
|
|
|
||
|
|
/************************************************************************************
|
||
|
|
* Definitions
|
||
|
|
************************************************************************************/
|
||
|
|
|
||
|
|
/* Clocking *************************************************************************/
|
||
|
|
|
||
|
|
/* RCC settings. Crystal on-board the CC3200 LaunchPad include:
|
||
|
|
*
|
||
|
|
* 40MHz internal clock
|
||
|
|
* 32.768kHz RTC clock
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define SYSCON_RCC_XTAL SYSCON_RCC_XTAL40000KHZ /* On-board crystal is 40 MHz */
|
||
|
|
#define XTAL_FREQUENCY 40000000
|
||
|
|
|
||
|
|
/* Oscillator source is the main oscillator */
|
||
|
|
|
||
|
|
#define SYSCON_RCC_OSCSRC SYSCON_RCC_OSCSRC_MOSC
|
||
|
|
#define SYSCON_RCC2_OSCSRC SYSCON_RCC2_OSCSRC2_MOSC
|
||
|
|
#define OSCSRC_FREQUENCY XTAL_FREQUENCY
|
||
|
|
|
||
|
|
#define TIVA_SYSDIV 5
|
||
|
|
#define SYSCLK_FREQUENCY 80000000 /* 80MHz */
|
||
|
|
|
||
|
|
/* Other RCC settings:
|
||
|
|
*
|
||
|
|
* - Main and internal oscillators enabled.
|
||
|
|
* - PLL and sys dividers not bypassed
|
||
|
|
* - PLL not powered down
|
||
|
|
* - No auto-clock gating reset
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define TIVA_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | \
|
||
|
|
SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(TIVA_SYSDIV))
|
||
|
|
|
||
|
|
/* RCC2 settings
|
||
|
|
*
|
||
|
|
* - PLL and sys dividers not bypassed.
|
||
|
|
* - PLL not powered down
|
||
|
|
* - Not using RCC2
|
||
|
|
*
|
||
|
|
* When SYSCON_RCC2_DIV400 is not selected, SYSDIV2 is the divisor-1.
|
||
|
|
* When SYSCON_RCC2_DIV400 is selected, SYSDIV2 is the divisor-1)/2, plus
|
||
|
|
* the LSB:
|
||
|
|
*
|
||
|
|
* SYSDIV2 SYSDIV2LSB DIVISOR
|
||
|
|
* 0 N/A 2
|
||
|
|
* 1 0 3
|
||
|
|
* " 1 4
|
||
|
|
* 2 0 5
|
||
|
|
* " 1 6
|
||
|
|
* etc.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#if (TIVA_SYSDIV & 1) == 0
|
||
|
|
# define TIVA_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV2LSB | \
|
||
|
|
SYSCON_RCC2_SYSDIV_DIV400(TIVA_SYSDIV) | \
|
||
|
|
SYSCON_RCC2_DIV400 | SYSCON_RCC2_USERCC2)
|
||
|
|
#else
|
||
|
|
# define TIVA_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV_DIV400(TIVA_SYSDIV) | \
|
||
|
|
SYSCON_RCC2_DIV400 | SYSCON_RCC2_USERCC2)
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/* LED definitions ******************************************************************/
|
||
|
|
/* The CC3200 LaunchPad has three RGB LEDs.
|
||
|
|
*
|
||
|
|
* BOARD_LED_R -- Connected to PF1
|
||
|
|
* BOARD_LED_G -- Connected to PF3
|
||
|
|
* BOARD_LED_Y -- Connected to PF2
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* LED index values for use with cc3200_setled() */
|
||
|
|
|
||
|
|
#define BOARD_LED_R 1
|
||
|
|
#define BOARD_LED_G 2
|
||
|
|
#define BOARD_LED_Y 3
|
||
|
|
#define BOARD_NLEDS 3
|
||
|
|
|
||
|
|
/* LED bits for use with cc3200_setleds() */
|
||
|
|
|
||
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
||
|
|
#define BOARD_LED2_BIT (1 << BOARD_LED2)
|
||
|
|
|
||
|
|
/* If CONFIG_ARCH_LEDS is defined, then automated support for the LaunchPad LEDs
|
||
|
|
* will be included in the build:
|
||
|
|
*
|
||
|
|
* OFF:
|
||
|
|
* - OFF means that the OS is still initializing. Initialization is very fast so
|
||
|
|
* if you see this at all, it probably means that the system is hanging up
|
||
|
|
* somewhere in the initialization phases.
|
||
|
|
*
|
||
|
|
* GREEN
|
||
|
|
* - This means that the OS completed initialization.
|
||
|
|
*
|
||
|
|
* BLUE:
|
||
|
|
* - Whenever and interrupt or signal handler is entered, the BLUE LED is
|
||
|
|
* illuminated and extinguished when the interrupt or signal handler exits.
|
||
|
|
*
|
||
|
|
* RED:
|
||
|
|
* - If a recovered assertion occurs, the RED LED will be illuminated
|
||
|
|
* briefly while the assertion is handled. You will probably never see this.
|
||
|
|
*
|
||
|
|
* Flashing RED:
|
||
|
|
* - In the event of a fatal crash,
|
||
|
|
* extinguished and the RED component will FLASH at a 2Hz rate.
|
||
|
|
*/
|
||
|
|
/* RED GREEN BLUE */
|
||
|
|
#define LED_STARTED 0 /* OFF OFF OFF */
|
||
|
|
#define LED_HEAPALLOCATE 0 /* OFF OFF OFF */
|
||
|
|
#define LED_IRQSENABLED 0 /* OFF OFF OFF */
|
||
|
|
#define LED_STACKCREATED 1 /* OFF ON OFF */
|
||
|
|
#define LED_INIRQ 2 /* NC NC ON (momentary) */
|
||
|
|
#define LED_SIGNAL 2 /* NC NC ON (momentary) */
|
||
|
|
#define LED_ASSERTION 3 /* ON NC NC (momentary) */
|
||
|
|
#define LED_PANIC 4 /* ON OFF OFF (flashing 2Hz) */
|
||
|
|
|
||
|
|
/* LED definitions ******************************************************************/
|
||
|
|
/* The CC3200 LaunchPad has two buttons:
|
||
|
|
*
|
||
|
|
* BOARD_SW1 -- Connected to PF4
|
||
|
|
* BOARD_SW2 -- Connected to PF0
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define BUTTON_SW1 0
|
||
|
|
#define BUTTON_SW2 1
|
||
|
|
#define BUTTON_SW3 2
|
||
|
|
#define NUM_BUTTONS 3
|
||
|
|
|
||
|
|
#define BUTTON_SW1_BIT (1 << BUTTON_SW1)
|
||
|
|
#define BUTTON_SW2_BIT (1 << BUTTON_SW2)
|
||
|
|
#define BUTTON_SW3_BIT (1 << BUTTON_SW3)
|
||
|
|
|
||
|
|
/************************************************************************************
|
||
|
|
* Public Function Prototypes
|
||
|
|
************************************************************************************/
|
||
|
|
|
||
|
|
#ifndef __ASSEMBLY__
|
||
|
|
|
||
|
|
/************************************************************************************
|
||
|
|
* Name: tiva_boardinitialize
|
||
|
|
*
|
||
|
|
* Description:
|
||
|
|
* All Tiva architectures must provide the following entry point. This entry
|
||
|
|
* point is called early in the initialization -- after all memory has been
|
||
|
|
* configured and mapped but before any devices have been initialized.
|
||
|
|
*
|
||
|
|
************************************************************************************/
|
||
|
|
|
||
|
|
void tiva_boardinitialize(void);
|
||
|
|
|
||
|
|
/************************************************************************************
|
||
|
|
* Name: cc3200_ledinit, cc3200_setled, and cc3200_setleds
|
||
|
|
*
|
||
|
|
* Description:
|
||
|
|
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LED. If
|
||
|
|
* CONFIG_ARCH_LEDS is not defined, then the following interfaces are available to
|
||
|
|
* control the LEDs from user applications.
|
||
|
|
*
|
||
|
|
************************************************************************************/
|
||
|
|
|
||
|
|
#ifndef CONFIG_ARCH_LEDS
|
||
|
|
void cc3200_ledinit(void);
|
||
|
|
void cc3200_setled(int led, unsigned char ledon);
|
||
|
|
void cc3200_setleds(unsigned char ledset);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/************************************************************************************
|
||
|
|
* Name: up_buttoninit
|
||
|
|
*
|
||
|
|
* Description:
|
||
|
|
* up_buttoninit() must be called to initialize button resources. After that,
|
||
|
|
* up_buttons() may be called to collect the current state of all buttons or
|
||
|
|
* up_irqbutton() may be called to register button interrupt handlers.
|
||
|
|
*
|
||
|
|
************************************************************************************/
|
||
|
|
|
||
|
|
#ifdef CONFIG_ARCH_BUTTONS
|
||
|
|
void up_buttoninit(void);
|
||
|
|
|
||
|
|
/************************************************************************************
|
||
|
|
* Name: up_buttons
|
||
|
|
*
|
||
|
|
* Description:
|
||
|
|
* up_buttoninit() must be called to initialize button resources. After that,
|
||
|
|
* up_buttons() may be called to collect the current state of all buttons.
|
||
|
|
*
|
||
|
|
* After up_buttoninit() has been called, up_buttons() may be called to collect
|
||
|
|
* the state of all buttons. up_buttons() returns an 8-bit bit set with each bit
|
||
|
|
* associated with a button. See the BOARD_BUTTON_*_BIT and BOARD_JOYSTICK_*_BIT
|
||
|
|
* definitions above for the meaning of each bit.
|
||
|
|
*
|
||
|
|
************************************************************************************/
|
||
|
|
|
||
|
|
uint8_t up_buttons(void);
|
||
|
|
|
||
|
|
/************************************************************************************
|
||
|
|
* Button support.
|
||
|
|
*
|
||
|
|
* Description:
|
||
|
|
* up_buttoninit() must be called to initialize button resources. After that,
|
||
|
|
* up_irqbutton() may be called to register button interrupt handlers.
|
||
|
|
*
|
||
|
|
* up_irqbutton() may be called to register an interrupt handler that will be called
|
||
|
|
* when a button is depressed or released. The ID value is a button enumeration
|
||
|
|
* value that uniquely identifies a button resource. See the BOARD_BUTTON_* and
|
||
|
|
* BOARD_JOYSTICK_* definitions in above for the meaning of enumeration values
|
||
|
|
* The previous interrupt handler address is returned (so that it may restored, if
|
||
|
|
* so desired).
|
||
|
|
*
|
||
|
|
* Note that up_irqbutton() also enables button interrupts. Button interrupts
|
||
|
|
* will remain enabled after the interrupt handler is attached. Interrupts may
|
||
|
|
* be disabled (and detached) by calling up_irqbutton with irqhandler equal to
|
||
|
|
* NULL.
|
||
|
|
*
|
||
|
|
************************************************************************************/
|
||
|
|
|
||
|
|
#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ)
|
||
|
|
xcpt_t up_irqbutton(int id, xcpt_t irqhandler);
|
||
|
|
#endif
|
||
|
|
#endif /* CONFIG_ARCH_BUTTONS */
|
||
|
|
|
||
|
|
#endif /* __ASSEMBLY__ */
|
||
|
|
#endif /* __CONFIGS_CC3200_LAUNCHPAD_INCLUDE_BOARD_H */
|