sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
d7ee492fc4
nuttx/boards/renesas/rx65n/rx65n-grrose/scripts/Make.defs

64 lines
2.1 KiB
Plaintext
Raw Normal View History

We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
##############################################################################
makefiles: Fix relative path in file header
2021-03-08 22:29:12 +01:00
# boards/renesas/rx65n/rx65n-grrose/scripts/Make.defs
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
#
boards: rx65n: update licenses to Apache Gregory Nutt is the copyright holder for those files and he has submitted the SGA as a result we can migrate the licenses to Apache. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 11:13:22 +02:00
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership. The
# ASF licenses this file to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance with the
# License. You may obtain a copy of the License at
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
#
boards: rx65n: update licenses to Apache Gregory Nutt is the copyright holder for those files and he has submitted the SGA as a result we can migrate the licenses to Apache. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 11:13:22 +02:00
# http://www.apache.org/licenses/LICENSE-2.0
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
#
boards: rx65n: update licenses to Apache Gregory Nutt is the copyright holder for those files and he has submitted the SGA as a result we can migrate the licenses to Apache. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-16 11:13:22 +02:00
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
#
##############################################################################
build: replace ${TOPDIR} with $(TOPDIR) in Makefile make the usage consistence Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-19 16:25:18 +02:00
include $(TOPDIR)/.config
include $(TOPDIR)/tools/Config.mk
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
Remove duplicate linker script definitions ## Summary A lot of linker scripts were listed twice, once for unix, once for windows. This PR cleans up the logic so they're only listed once. ## Impact Any opportunity to use a single source of truth and reduce lines of code is a win! ## Testing CI will test all build
2022-02-14 22:29:40 +01:00
ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)linker_script.ld
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
CROSSDEV = rx-elf-
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
boards: Move toolchain related variables to Toolchain.defs 1.It make sense to let Toolchain.defs give the default value 2.The board can still change if the default isn't suitable 3.Avoid the same definition spread more than 200 Make.defs Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Change-Id: Ic2649f1c7689bcf59c105ca8db61cad45b6e0e64
2020-07-01 12:08:10 +02:00
CPP = $(CROSSDEV)gcc -E -P -x c
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
LD = $(CROSSDEV)ld
STRIP = $(CROSSDEV)strip --strip-unneeded
AR = $(CROSSDEV)ar rcs
AS = $(CROSSDEV)as
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
build: Replace -I with INCDIR Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-19 11:43:29 +02:00
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
endif
ifneq ($(CONFIG_DEBUG_NOOPT),y)
board: Remove -fno-strength-reduce Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-01-17 19:26:25 +01:00
ARCHOPTIMIZATION += -Os -fno-strict-aliasing -fomit-frame-pointer
build: Replace -I with INCDIR Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-19 11:43:29 +02:00
endif
ARCHPICFLAGS = -fpic
boards: Remove -fno-builtin it's more efficent to generate the machine code directly if possible Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-12 23:14:22 +01:00
ARCHCFLAGS = -fno-common -std=c99
build: Replace -I with INCDIR Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-19 11:43:29 +02:00
ARCHCPUFLAGS = -mcpu=rx64m
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
make/expression: improving up asm/C/C++ compile times In the current compilation environment, the recursive assignment(=) for compile flags will be delayed until every file is actually need to be compile. For example: -------------------------------------------------------------------------------- arch/arm/src/Makefile: INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)chip} INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)common} INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)$(ARCH_SUBDIR)} INCLUDES += ${shell $(INCDIR) "$(CC)" $(TOPDIR)$(DELIM)sched} CPPFLAGS += $(INCLUDES) $(EXTRAFLAGS) CFLAGS += $(INCLUDES) $(EXTRAFLAGS) CXXFLAGS += $(INCLUDES) $(EXTRAFLAGS) AFLAGS += $(INCLUDES) $(EXTRAFLAGS) -------------------------------------------------------------------------------- All compilation options will be included recursively, which will be delayed until the compilation options are actually used: tools/Config.mk: -------------------------------------------------------------------------------- define COMPILE @echo "CC: $1" $(Q) $(CC) -c $(CFLAGS) $($(strip $1)_CFLAGS) $1 -o $2 endef -------------------------------------------------------------------------------- All compile flags to be reexecuted $(INCDIR) as long as one file needs to be compiled, but in fact, the compilation options have not changed in the current directory. So the we recommand to change the syntax of assignment From Recursive (=) To Simple (:=) In this way, we can ensure that all compilation options are expanded only once and reducing repeated works. Signed-off-by: chao.an <anchao@xiaomi.com>
2020-09-24 12:46:51 +02:00
CFLAGS := $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
Use EXTRAFLAGS instead of EXTRADEFINES to be used by make via command line So call 'make EXTRAFLAGS=-Wno-cpp' could suppress the warnings with pre-processor directive #warning in GCC. Change-Id: Iaa618238924c9969bf91db22117b39e6d2fc9bb6 Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-04-10 04:37:54 +02:00
$(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
make/expression: improving up asm/C/C++ compile times In the current compilation environment, the recursive assignment(=) for compile flags will be delayed until every file is actually need to be compile. For example: -------------------------------------------------------------------------------- arch/arm/src/Makefile: INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)chip} INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)common} INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)$(ARCH_SUBDIR)} INCLUDES += ${shell $(INCDIR) "$(CC)" $(TOPDIR)$(DELIM)sched} CPPFLAGS += $(INCLUDES) $(EXTRAFLAGS) CFLAGS += $(INCLUDES) $(EXTRAFLAGS) CXXFLAGS += $(INCLUDES) $(EXTRAFLAGS) AFLAGS += $(INCLUDES) $(EXTRAFLAGS) -------------------------------------------------------------------------------- All compilation options will be included recursively, which will be delayed until the compilation options are actually used: tools/Config.mk: -------------------------------------------------------------------------------- define COMPILE @echo "CC: $1" $(Q) $(CC) -c $(CFLAGS) $($(strip $1)_CFLAGS) $1 -o $2 endef -------------------------------------------------------------------------------- All compile flags to be reexecuted $(INCDIR) as long as one file needs to be compiled, but in fact, the compilation options have not changed in the current directory. So the we recommand to change the syntax of assignment From Recursive (=) To Simple (:=) In this way, we can ensure that all compilation options are expanded only once and reducing repeated works. Signed-off-by: chao.an <anchao@xiaomi.com>
2020-09-24 12:46:51 +02:00
CPPFLAGS := $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) $(ARCHWARNINGSXX)
AFLAGS := $(CFLAGS) -D__ASSEMBLY__
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
LDMODULEFLAGS = -r -e module_initialize
boards: Replace CONFIG_CYGWIN_WINTOOL with CONVERT_PATH Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-20 03:34:50 +01:00
LDMODULEFLAGS += -T $(call CONVERT_PATH,$(TOPDIR)/libs/libc/modlib/gnu-elf.ld)
We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 1. Serial (UART) driver (13 ports) 2. Ethernet driver This port is provided on two boards 1. RSK RX65N-2MB 2. GR-Rose The port is built on Cygwin environment. As part of this port, we have created two documents 1. Readme.txt for each board 2. User manual to provide information about development environment setup Both these documents are placed under 1. /boards/renesas/rx65n/rx65n-grrose 2. /boards/renesas/rx65n/rx65n-rsk2mb We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform. We have shared the log with no errors as confirmation of valid port.
2019-10-11 17:36:57 +02:00
CMODULEFLAGS = $(CFLAGS) -mlong-calls # --target1-abs
ASMEXT = .asm
Reference in New Issue Copy Permalink