958 lines
23 KiB
C
958 lines
23 KiB
C
|
/****************************************************************************
|
||
|
* drivers/sensors/max44009.c
|
||
|
*
|
||
|
* Copyright (C) 2014-2018 Haltian Ltd. All rights reserved.
|
||
|
* Authors: Dmitry Nikolaev <dmitry.nikolaev@haltian.com>
|
||
|
* Juha Niskanen <juha.niskanen@haltian.com>
|
||
|
*
|
||
|
* Redistribution and use in source and binary forms, with or without
|
||
|
* modification, are permitted provided that the following conditions
|
||
|
* are met:
|
||
|
*
|
||
|
* 1. Redistributions of source code must retain the above copyright
|
||
|
* notice, this list of conditions and the following disclaimer.
|
||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||
|
* notice, this list of conditions and the following disclaimer in
|
||
|
* the documentation and/or other materials provided with the
|
||
|
* distribution.
|
||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||
|
* used to endorse or promote products derived from this software
|
||
|
* without specific prior written permission.
|
||
|
*
|
||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||
|
*
|
||
|
****************************************************************************/
|
||
|
|
||
|
/****************************************************************************
|
||
|
* Included Files
|
||
|
****************************************************************************/
|
||
|
|
||
|
#include <nuttx/config.h>
|
||
|
#include <sys/types.h>
|
||
|
#include <errno.h>
|
||
|
#include <debug.h>
|
||
|
#include <poll.h>
|
||
|
#include <stdio.h>
|
||
|
|
||
|
#include <nuttx/fs/fs.h>
|
||
|
#include <nuttx/i2c/i2c_master.h>
|
||
|
#include <nuttx/kmalloc.h>
|
||
|
#include <nuttx/random.h>
|
||
|
|
||
|
#include <nuttx/sensors/max44009.h>
|
||
|
|
||
|
/****************************************************************************
|
||
|
* Pre-Processor Definitions
|
||
|
****************************************************************************/
|
||
|
|
||
|
#ifdef CONFIG_DEBUG_MAX44009
|
||
|
# define max44009_dbg(x, ...) _info(x, ##__VA_ARGS__)
|
||
|
#else
|
||
|
# define max44009_dbg(x, ...) sninfo(x, ##__VA_ARGS__)
|
||
|
#endif
|
||
|
|
||
|
#ifndef CONFIG_MAX44009_I2C_FREQUENCY
|
||
|
# define CONFIG_MAX44009_I2C_FREQUENCY 400000
|
||
|
#endif
|
||
|
|
||
|
/* Registers */
|
||
|
|
||
|
#define MAX44009_INT_STS 0x0
|
||
|
#define MAX44009_INT_EN 0x01
|
||
|
#define MAX44009_CONFIG 0x02
|
||
|
#define MAX44009_LUX_HBYTE 0x03
|
||
|
#define MAX44009_LUX_LBYTE 0x04
|
||
|
#define MAX44009_UP_THRESH_BYTE 0x05
|
||
|
#define MAX44009_LOW_THRESH_BYTE 0x06
|
||
|
#define MAX44009_THRESH_TIMER 0x07
|
||
|
|
||
|
/* Other constants */
|
||
|
|
||
|
#define MAX44009_I2C_RETRIES 10
|
||
|
|
||
|
/****************************************************************************
|
||
|
* Private Types
|
||
|
****************************************************************************/
|
||
|
|
||
|
struct max44009_dev_s
|
||
|
{
|
||
|
FAR struct max44009_config_s *config;
|
||
|
sem_t dev_sem;
|
||
|
FAR struct i2c_master_s *i2c;
|
||
|
uint8_t addr;
|
||
|
uint8_t cref;
|
||
|
bool int_pending;
|
||
|
#ifndef CONFIG_DISABLE_POLL
|
||
|
struct pollfd *fds[CONFIG_MAX44009_NPOLLWAITERS];
|
||
|
#endif
|
||
|
};
|
||
|
|
||
|
/****************************************************************************
|
||
|
* Private Function Prototypes
|
||
|
****************************************************************************/
|
||
|
|
||
|
static int max44009_open(FAR struct file *filep);
|
||
|
static int max44009_close(FAR struct file *filep);
|
||
|
static ssize_t max44009_read(FAR struct file *filep, FAR char *buffer,
|
||
|
size_t buflen);
|
||
|
static ssize_t max44009_write(FAR struct file *filep, FAR const char *buffer,
|
||
|
size_t buflen);
|
||
|
static int max44009_ioctl(FAR struct file *filep, int cmd, unsigned long arg);
|
||
|
#ifndef CONFIG_DISABLE_POLL
|
||
|
static int max44009_poll(FAR struct file *filep, FAR struct pollfd *fds,
|
||
|
bool setup);
|
||
|
#endif
|
||
|
|
||
|
static int max44009_read_data(FAR struct max44009_dev_s *priv,
|
||
|
FAR struct max44009_data_s *data);
|
||
|
|
||
|
/****************************************************************************
|
||
|
* Private Data
|
||
|
****************************************************************************/
|
||
|
|
||
|
static const struct file_operations g_alsops =
|
||
|
{
|
||
|
max44009_open, /* open */
|
||
|
max44009_close, /* close */
|
||
|
max44009_read, /* read */
|
||
|
max44009_write, /* write */
|
||
|
NULL, /* seek */
|
||
|
max44009_ioctl /* ioctl */
|
||
|
#ifndef CONFIG_DISABLE_POLL
|
||
|
, max44009_poll /* poll */
|
||
|
#endif
|
||
|
#ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS
|
||
|
, NULL /* unlink */
|
||
|
#endif
|
||
|
};
|
||
|
|
||
|
/****************************************************************************
|
||
|
* Private Functions
|
||
|
****************************************************************************/
|
||
|
|
||
|
static int max44009_do_transfer(FAR struct max44009_dev_s *dev,
|
||
|
FAR struct i2c_msg_s *msgv,
|
||
|
size_t nmsg)
|
||
|
{
|
||
|
int ret = -EIO;
|
||
|
int retries;
|
||
|
|
||
|
for (retries = 0; retries < MAX44009_I2C_RETRIES; retries++)
|
||
|
{
|
||
|
ret = I2C_TRANSFER(dev->i2c, msgv, nmsg);
|
||
|
if (ret >= 0)
|
||
|
{
|
||
|
return 0;
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
#ifdef CONFIG_I2C_RESET
|
||
|
/* Some error. Try to reset I2C bus and keep trying. */
|
||
|
|
||
|
if (retries == MAX44009_I2C_RETRIES - 1)
|
||
|
{
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
ret = I2C_RESET(dev->i2c);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("I2C_RESET failed: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
#endif
|
||
|
}
|
||
|
}
|
||
|
|
||
|
max44009_dbg("xfer failed: %d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int max44009_write_reg8(FAR struct max44009_dev_s *dev,
|
||
|
FAR const uint8_t *command)
|
||
|
{
|
||
|
struct i2c_msg_s msgv[2] =
|
||
|
{
|
||
|
{
|
||
|
.frequency = CONFIG_MAX44009_I2C_FREQUENCY,
|
||
|
.addr = dev->addr,
|
||
|
.flags = 0,
|
||
|
.buffer = (void *)&command[0],
|
||
|
.length = 1
|
||
|
},
|
||
|
{
|
||
|
.frequency = CONFIG_MAX44009_I2C_FREQUENCY,
|
||
|
.addr = dev->addr,
|
||
|
.flags = I2C_M_NORESTART,
|
||
|
.buffer = (void *)&command[1],
|
||
|
.length = 1
|
||
|
}
|
||
|
};
|
||
|
|
||
|
return max44009_do_transfer(dev, msgv, 2);
|
||
|
}
|
||
|
|
||
|
static int max44009_read_reg8(FAR struct max44009_dev_s *dev,
|
||
|
FAR uint8_t *command,
|
||
|
FAR uint8_t *value)
|
||
|
{
|
||
|
struct i2c_msg_s msgv[2] =
|
||
|
{
|
||
|
{
|
||
|
.frequency = CONFIG_MAX44009_I2C_FREQUENCY,
|
||
|
.addr = dev->addr,
|
||
|
.flags = 0,
|
||
|
.buffer = command,
|
||
|
.length = 1
|
||
|
},
|
||
|
{
|
||
|
.frequency = CONFIG_MAX44009_I2C_FREQUENCY,
|
||
|
.addr = dev->addr,
|
||
|
.flags = I2C_M_READ,
|
||
|
.buffer = value,
|
||
|
.length = 1
|
||
|
}
|
||
|
};
|
||
|
|
||
|
return max44009_do_transfer(dev, msgv, 2);
|
||
|
}
|
||
|
|
||
|
static int max44009_open(FAR struct file *filep)
|
||
|
{
|
||
|
FAR struct inode *inode;
|
||
|
FAR struct max44009_dev_s *priv;
|
||
|
unsigned int use_count;
|
||
|
int ret;
|
||
|
|
||
|
DEBUGASSERT(filep);
|
||
|
inode = filep->f_inode;
|
||
|
|
||
|
DEBUGASSERT(inode && inode->i_private);
|
||
|
priv = (FAR struct max44009_dev_s *)inode->i_private;
|
||
|
|
||
|
do
|
||
|
{
|
||
|
ret = nxsem_wait(&priv->dev_sem);
|
||
|
|
||
|
/* The only case that an error should occur here is if the wait was
|
||
|
* awakened by a signal.
|
||
|
*/
|
||
|
|
||
|
DEBUGASSERT(ret == OK || ret == -EINTR);
|
||
|
}
|
||
|
while (ret == -EINTR);
|
||
|
|
||
|
use_count = priv->cref + 1;
|
||
|
if (use_count == 1)
|
||
|
{
|
||
|
/* First user, do power on. */
|
||
|
|
||
|
ret = priv->config->set_power(priv->config, true);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot power on sensor: %d\n", ret);
|
||
|
goto out_sem;
|
||
|
}
|
||
|
|
||
|
priv->config->irq_enable(priv->config, true);
|
||
|
priv->cref = use_count;
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
DEBUGASSERT(use_count < UINT8_MAX && use_count > priv->cref);
|
||
|
|
||
|
priv->cref = use_count;
|
||
|
ret = 0;
|
||
|
}
|
||
|
|
||
|
max44009_dbg("Sensor is powered on\n");
|
||
|
|
||
|
out_sem:
|
||
|
nxsem_post(&priv->dev_sem);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int max44009_close(FAR struct file *filep)
|
||
|
{
|
||
|
FAR struct inode *inode;
|
||
|
FAR struct max44009_dev_s *priv;
|
||
|
int use_count;
|
||
|
int ret;
|
||
|
|
||
|
DEBUGASSERT(filep);
|
||
|
inode = filep->f_inode;
|
||
|
|
||
|
DEBUGASSERT(inode && inode->i_private);
|
||
|
priv = (FAR struct max44009_dev_s *)inode->i_private;
|
||
|
|
||
|
do
|
||
|
{
|
||
|
ret = nxsem_wait(&priv->dev_sem);
|
||
|
|
||
|
/* The only case that an error should occur here is if the wait was
|
||
|
* awakened by a signal.
|
||
|
*/
|
||
|
|
||
|
DEBUGASSERT(ret == OK || ret == -EINTR);
|
||
|
}
|
||
|
while (ret == -EINTR);
|
||
|
|
||
|
use_count = priv->cref - 1;
|
||
|
if (use_count == 0)
|
||
|
{
|
||
|
priv->config->irq_enable(priv->config, false);
|
||
|
|
||
|
/* Last user, do power off. */
|
||
|
|
||
|
(void)priv->config->set_power(priv->config, false);
|
||
|
priv->cref = use_count;
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
DEBUGASSERT(use_count > 0);
|
||
|
|
||
|
priv->cref = use_count;
|
||
|
}
|
||
|
|
||
|
max44009_dbg("CLOSED\n");
|
||
|
nxsem_post(&priv->dev_sem);
|
||
|
return OK;
|
||
|
}
|
||
|
|
||
|
static ssize_t max44009_read(FAR struct file *filep, FAR char *buffer,
|
||
|
size_t buflen)
|
||
|
{
|
||
|
FAR struct inode *inode;
|
||
|
FAR struct max44009_dev_s *priv;
|
||
|
ssize_t length = 0;
|
||
|
int ret;
|
||
|
struct max44009_data_s data;
|
||
|
|
||
|
DEBUGASSERT(filep);
|
||
|
inode = filep->f_inode;
|
||
|
|
||
|
DEBUGASSERT(inode && inode->i_private);
|
||
|
priv = (FAR struct max44009_dev_s *)inode->i_private;
|
||
|
|
||
|
do
|
||
|
{
|
||
|
ret = nxsem_wait(&priv->dev_sem);
|
||
|
|
||
|
/* The only case that an error should occur here is if the wait was
|
||
|
* awakened by a signal.
|
||
|
*/
|
||
|
|
||
|
DEBUGASSERT(ret == OK || ret == -EINTR);
|
||
|
}
|
||
|
while (ret == -EINTR);
|
||
|
|
||
|
ret = max44009_read_data(priv, &data);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("failed to read the sensor\n");
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
/* This interface is mainly intended for easy debugging in nsh. */
|
||
|
|
||
|
length = snprintf(buffer, buflen, "%u.%03hu", data.lux, data.mlux);
|
||
|
if (length > buflen)
|
||
|
{
|
||
|
length = buflen;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
nxsem_post(&priv->dev_sem);
|
||
|
return length;
|
||
|
}
|
||
|
|
||
|
static ssize_t max44009_write(FAR struct file *filep, FAR const char *buffer,
|
||
|
size_t buflen)
|
||
|
{
|
||
|
ssize_t length = 0;
|
||
|
return length;
|
||
|
}
|
||
|
|
||
|
static int max44009_set_interrupt_bit(FAR struct max44009_dev_s *priv,
|
||
|
bool is_activated)
|
||
|
{
|
||
|
int ret;
|
||
|
uint8_t cmd[2];
|
||
|
|
||
|
cmd[0] = MAX44009_INT_EN;
|
||
|
cmd[1] = is_activated ? (1 << 0) : 0;
|
||
|
|
||
|
ret = max44009_write_reg8(priv, cmd);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot set interrupt bit\n");
|
||
|
}
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int max44009_set_manual_mode(FAR struct max44009_dev_s *priv,
|
||
|
bool is_manual)
|
||
|
{
|
||
|
int ret;
|
||
|
uint8_t value = 0;
|
||
|
const uint8_t manual_bit = (1 << 6);
|
||
|
uint8_t cmd[2];
|
||
|
|
||
|
cmd[0] = MAX44009_CONFIG;
|
||
|
ret = max44009_read_reg8(priv, &cmd[0], &value);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot read config register\n");
|
||
|
goto fail;
|
||
|
}
|
||
|
|
||
|
if (is_manual)
|
||
|
{
|
||
|
value |= manual_bit;
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
value &= ~manual_bit;
|
||
|
}
|
||
|
|
||
|
cmd[1] = value;
|
||
|
ret = max44009_write_reg8(priv, cmd);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot set manual bit in config register\n");
|
||
|
}
|
||
|
|
||
|
fail:
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int max44009_set_continuous_mode(FAR struct max44009_dev_s *priv,
|
||
|
bool is_cont)
|
||
|
{
|
||
|
int ret;
|
||
|
uint8_t value = 0;
|
||
|
const uint8_t cont_bit = (1 << 7);
|
||
|
uint8_t cmd[2];
|
||
|
|
||
|
cmd[0] = MAX44009_CONFIG;
|
||
|
ret = max44009_read_reg8(priv, &cmd[0], &value);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot read config register\n");
|
||
|
goto fail;
|
||
|
}
|
||
|
|
||
|
if (is_cont)
|
||
|
{
|
||
|
value |= cont_bit;
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
value &= ~cont_bit;
|
||
|
}
|
||
|
|
||
|
cmd[1] = value;
|
||
|
ret = max44009_write_reg8(priv, cmd);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot set cont bit in config register\n");
|
||
|
}
|
||
|
|
||
|
fail:
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int max44009_set_current_div_ratio(FAR struct max44009_dev_s *priv,
|
||
|
bool is_cdr)
|
||
|
{
|
||
|
int ret;
|
||
|
uint8_t value = 0;
|
||
|
const uint8_t cdr_bit = (1 << 3);
|
||
|
uint8_t cmd[2];
|
||
|
|
||
|
cmd[0] = MAX44009_CONFIG;
|
||
|
ret = max44009_read_reg8(priv, &cmd[0], &value);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot read config register\n");
|
||
|
goto fail;
|
||
|
}
|
||
|
|
||
|
if (is_cdr)
|
||
|
{
|
||
|
value |= cdr_bit;
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
value &= ~cdr_bit;
|
||
|
}
|
||
|
|
||
|
cmd[1] = value;
|
||
|
ret = max44009_write_reg8(priv, cmd);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot set cdr bit in config register\n");
|
||
|
}
|
||
|
|
||
|
fail:
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int max44009_set_integration_time(FAR struct max44009_dev_s *priv,
|
||
|
enum max44009_integration_time_e
|
||
|
integration_time)
|
||
|
{
|
||
|
int ret;
|
||
|
uint8_t value = 0;
|
||
|
const uint8_t tim_bits = integration_time << 0;
|
||
|
const uint8_t tim_mask = 0x07;
|
||
|
uint8_t cmd[2];
|
||
|
|
||
|
cmd[0] = MAX44009_CONFIG;
|
||
|
ret = max44009_read_reg8(priv, &cmd[0], &value);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot read config register\n");
|
||
|
goto fail;
|
||
|
}
|
||
|
|
||
|
value &= ~tim_mask;
|
||
|
value |= tim_bits;
|
||
|
|
||
|
cmd[1] = value;
|
||
|
ret = max44009_write_reg8(priv, cmd);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot set tim bits in config register\n");
|
||
|
}
|
||
|
|
||
|
fail:
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int max44009_set_threshold_timer(FAR struct max44009_dev_s *priv,
|
||
|
uint8_t threshold_timer)
|
||
|
{
|
||
|
int ret;
|
||
|
uint8_t cmd[2];
|
||
|
|
||
|
cmd[0] = MAX44009_THRESH_TIMER;
|
||
|
cmd[1] = threshold_timer;
|
||
|
|
||
|
ret = max44009_write_reg8(priv, cmd);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Threshold timer cannot be set\n");
|
||
|
}
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int max44009_set_threshold(FAR struct max44009_dev_s *priv,
|
||
|
FAR struct max44009_threshold_s *settings)
|
||
|
{
|
||
|
int ret;
|
||
|
uint8_t cmd[2];
|
||
|
|
||
|
cmd[0] = MAX44009_UP_THRESH_BYTE;
|
||
|
cmd[1] = settings->upper_threshold;
|
||
|
ret = max44009_write_reg8(priv, cmd);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot set upper threshold\n");
|
||
|
goto fail;
|
||
|
}
|
||
|
|
||
|
cmd[0] = MAX44009_LOW_THRESH_BYTE;
|
||
|
cmd[1] = settings->lower_threshold;
|
||
|
ret = max44009_write_reg8(priv, cmd);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot set lower threshold\n");
|
||
|
goto fail;
|
||
|
}
|
||
|
|
||
|
ret = max44009_set_threshold_timer(priv, settings->threshold_timer);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot set threshold timer\n");
|
||
|
goto fail;
|
||
|
}
|
||
|
|
||
|
ret = max44009_set_interrupt_bit(priv, true);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot set interrupt\n");
|
||
|
goto fail;
|
||
|
}
|
||
|
|
||
|
fail:
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int max44009_selftest(FAR struct max44009_dev_s *priv,
|
||
|
FAR struct max44009_data_s * data)
|
||
|
{
|
||
|
int ret;
|
||
|
uint8_t reg_addr = MAX44009_THRESH_TIMER;
|
||
|
uint8_t value = 0;
|
||
|
|
||
|
ret = max44009_set_threshold_timer(priv, data->test_value);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot write test-value\n");
|
||
|
goto fail;
|
||
|
}
|
||
|
|
||
|
ret = max44009_read_reg8(priv, ®_addr, &value);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot read written value\n");
|
||
|
goto fail;
|
||
|
}
|
||
|
|
||
|
if (value != data->test_value)
|
||
|
{
|
||
|
max44009_dbg("Test failed\n");
|
||
|
ret = -EIO;
|
||
|
}
|
||
|
|
||
|
fail:
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int max44009_init_device(FAR struct max44009_dev_s *priv,
|
||
|
FAR struct max44009_init_s * settings)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = max44009_set_manual_mode(priv, settings->is_manual);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot init manual mode\n");
|
||
|
goto fail;
|
||
|
}
|
||
|
|
||
|
ret = max44009_set_continuous_mode(priv, settings->is_cont);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot init cont mode\n");
|
||
|
goto fail;
|
||
|
}
|
||
|
|
||
|
if (settings->is_manual)
|
||
|
{
|
||
|
ret = max44009_set_current_div_ratio(priv, settings->is_cdr);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot init cdr mode\n");
|
||
|
goto fail;
|
||
|
}
|
||
|
|
||
|
ret = max44009_set_integration_time(priv, settings->integr_time);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot init tim mode\n");
|
||
|
goto fail;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
fail:
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int max44009_read_data(FAR struct max44009_dev_s *priv,
|
||
|
FAR struct max44009_data_s *data)
|
||
|
{
|
||
|
int ret;
|
||
|
uint8_t lvalue;
|
||
|
uint8_t hvalue;
|
||
|
uint8_t reg_addr;
|
||
|
uint32_t val;
|
||
|
|
||
|
reg_addr = MAX44009_INT_STS;
|
||
|
ret = max44009_read_reg8(priv, ®_addr, &hvalue);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot read interrupt status register\n");
|
||
|
}
|
||
|
|
||
|
reg_addr = MAX44009_LUX_HBYTE;
|
||
|
ret = max44009_read_reg8(priv, ®_addr, &hvalue);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot read high bits from lux register\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* LUX HBYTE has (starting with MSB): E3.E2.E1.E0.M7.M6.M5.M4
|
||
|
* LUX LBYTE has : --.--.--.--.M3.M2.M1.M0
|
||
|
*
|
||
|
* E[3..0] = Exponent, M[7..0]: Mantissa.
|
||
|
*
|
||
|
* Lux can be calculated as (full resolution): (M[7..0] << E[3..0]) * 0.045.
|
||
|
*
|
||
|
* Lux can also be calculated using only HBYTE:
|
||
|
* (M[7..4] << E[3..0]) * 0.72
|
||
|
* == (M[7..4] << E[3..0]) * 2^4 * 0.045
|
||
|
* == (M[7..4] << E[3..0]) * (1 << 4) * 0.045
|
||
|
* == (M[7..4] << (E[3..0] + 4)) * 0.045
|
||
|
*/
|
||
|
|
||
|
reg_addr = MAX44009_LUX_LBYTE;
|
||
|
ret = max44009_read_reg8(priv, ®_addr, &lvalue);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
max44009_dbg("Cannot read low bits from lux register\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* Merge HBYTE and LBYTE to 16-bit integer:
|
||
|
* --.--.--.--.E3.E2.E1.E0.M7.M6.M5.M4.M3.M2.M1.M0 */
|
||
|
|
||
|
data->raw_value = (hvalue << 4) | (lvalue & 0xf);
|
||
|
|
||
|
/* Add raw value to entropy pool. */
|
||
|
|
||
|
add_sensor_randomness(data->raw_value);
|
||
|
|
||
|
/* Convert raw value to lux and millilux. */
|
||
|
|
||
|
val = data->raw_value & 0xff;
|
||
|
val = val << ((data->raw_value & 0x0f00) >> 8);
|
||
|
|
||
|
/* lux is the raw output multiplied by 0.045. */
|
||
|
|
||
|
data->lux = (val * 45) / 1000;
|
||
|
data->mlux = (val * 45) % 1000;
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int max44009_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
|
||
|
{
|
||
|
FAR struct inode *inode;
|
||
|
FAR struct max44009_dev_s *priv;
|
||
|
int ret;
|
||
|
|
||
|
DEBUGASSERT(filep);
|
||
|
inode = filep->f_inode;
|
||
|
|
||
|
DEBUGASSERT(inode && inode->i_private);
|
||
|
priv = (FAR struct max44009_dev_s *)inode->i_private;
|
||
|
|
||
|
do
|
||
|
{
|
||
|
ret = nxsem_wait(&priv->dev_sem);
|
||
|
|
||
|
/* The only case that an error should occur here is if the wait was
|
||
|
* awakened by a signal.
|
||
|
*/
|
||
|
|
||
|
DEBUGASSERT(ret == OK || ret == -EINTR);
|
||
|
}
|
||
|
while (ret == -EINTR);
|
||
|
|
||
|
switch (cmd)
|
||
|
{
|
||
|
case SNIOC_INIT:
|
||
|
ret = max44009_init_device(priv, (FAR struct max44009_init_s *)arg);
|
||
|
break;
|
||
|
|
||
|
case SNIOC_THRESHOLD:
|
||
|
ret = max44009_set_threshold(priv,
|
||
|
(FAR struct max44009_threshold_s *)arg);
|
||
|
break;
|
||
|
|
||
|
case SNIOC_READ_RAW_DATA:
|
||
|
case SNIOC_READ_CONVERT_DATA:
|
||
|
ret = max44009_read_data(priv, (FAR struct max44009_data_s *)arg);
|
||
|
break;
|
||
|
|
||
|
case SNIOC_START_SELFTEST:
|
||
|
ret = max44009_selftest(priv, (FAR struct max44009_data_s *)arg);
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
ret = -ENOTTY;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
nxsem_post(&priv->dev_sem);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
#ifndef CONFIG_DISABLE_POLL
|
||
|
static void max44009_notify(FAR struct max44009_dev_s *priv)
|
||
|
{
|
||
|
DEBUGASSERT(priv != NULL);
|
||
|
|
||
|
int i;
|
||
|
|
||
|
/* If there are threads waiting on poll() for data to become available,
|
||
|
* then wake them up now. NOTE: we wake up all waiting threads because we
|
||
|
* do not know that they are going to do. If they all try to read the
|
||
|
* data, then some make end up blocking after all.
|
||
|
*/
|
||
|
|
||
|
for (i = 0; i < CONFIG_MAX44009_NPOLLWAITERS; i++)
|
||
|
{
|
||
|
FAR struct pollfd *fds = priv->fds[i];
|
||
|
if (fds)
|
||
|
{
|
||
|
fds->revents |= POLLIN;
|
||
|
max44009_dbg("Report events: %02x\n", fds->revents);
|
||
|
nxsem_post(fds->sem);
|
||
|
priv->int_pending = false;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int max44009_poll(FAR struct file *filep, FAR struct pollfd *fds,
|
||
|
bool setup)
|
||
|
{
|
||
|
FAR struct inode *inode;
|
||
|
FAR struct max44009_dev_s *priv;
|
||
|
int ret;
|
||
|
int i;
|
||
|
|
||
|
DEBUGASSERT(filep && fds);
|
||
|
inode = filep->f_inode;
|
||
|
|
||
|
DEBUGASSERT(inode && inode->i_private);
|
||
|
priv = (FAR struct max44009_dev_s *)inode->i_private;
|
||
|
|
||
|
do
|
||
|
{
|
||
|
ret = nxsem_wait(&priv->dev_sem);
|
||
|
|
||
|
/* The only case that an error should occur here is if the wait was
|
||
|
* awakened by a signal.
|
||
|
*/
|
||
|
|
||
|
DEBUGASSERT(ret == OK || ret == -EINTR);
|
||
|
}
|
||
|
while (ret == -EINTR);
|
||
|
|
||
|
if (setup)
|
||
|
{
|
||
|
/* Ignore waits that do not include POLLIN */
|
||
|
|
||
|
if ((fds->events & POLLIN) == 0)
|
||
|
{
|
||
|
ret = -EDEADLK;
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
/* This is a request to set up the poll. Find an available slot for the
|
||
|
* poll structure reference */
|
||
|
|
||
|
for (i = 0; i < CONFIG_MAX44009_NPOLLWAITERS; i++)
|
||
|
{
|
||
|
/* Find an available slot */
|
||
|
|
||
|
if (!priv->fds[i])
|
||
|
{
|
||
|
/* Bind the poll structure and this slot */
|
||
|
|
||
|
priv->fds[i] = fds;
|
||
|
fds->priv = &priv->fds[i];
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (i >= CONFIG_MAX44009_NPOLLWAITERS)
|
||
|
{
|
||
|
fds->priv = NULL;
|
||
|
ret = -EBUSY;
|
||
|
goto out;
|
||
|
}
|
||
|
if (priv->int_pending)
|
||
|
{
|
||
|
max44009_notify(priv);
|
||
|
}
|
||
|
}
|
||
|
else if (fds->priv)
|
||
|
{
|
||
|
/* This is a request to tear down the poll. */
|
||
|
|
||
|
struct pollfd **slot = (struct pollfd **)fds->priv;
|
||
|
DEBUGASSERT(slot != NULL);
|
||
|
|
||
|
/* Remove all memory of the poll setup */
|
||
|
|
||
|
*slot = NULL;
|
||
|
fds->priv = NULL;
|
||
|
}
|
||
|
out:
|
||
|
nxsem_post(&priv->dev_sem);
|
||
|
return ret;
|
||
|
}
|
||
|
#endif /* !CONFIG_DISABLE_POLL */
|
||
|
|
||
|
static int max44009_int_handler(int irq, FAR void *context, FAR void *arg)
|
||
|
{
|
||
|
FAR struct max44009_dev_s *priv = (FAR struct max44009_dev_s *)arg;
|
||
|
irqstate_t flags;
|
||
|
|
||
|
DEBUGASSERT(priv != NULL);
|
||
|
|
||
|
flags = enter_critical_section();
|
||
|
priv->int_pending = true;
|
||
|
leave_critical_section(flags);
|
||
|
#ifndef CONFIG_DISABLE_POLL
|
||
|
max44009_notify(priv);
|
||
|
#endif
|
||
|
max44009_dbg("MAX44009 interrupt\n");
|
||
|
|
||
|
return OK;
|
||
|
}
|
||
|
|
||
|
/****************************************************************************
|
||
|
* Public Functions
|
||
|
****************************************************************************/
|
||
|
|
||
|
int max44009_register(FAR const char *devpath, FAR struct i2c_master_s *i2c,
|
||
|
uint8_t addr, FAR struct max44009_config_s *config)
|
||
|
{
|
||
|
struct max44009_dev_s *priv;
|
||
|
int ret;
|
||
|
|
||
|
priv = kmm_zalloc(sizeof(struct max44009_dev_s));
|
||
|
if (!priv)
|
||
|
{
|
||
|
max44009_dbg("Memory cannot be allocated for ALS sensor\n");
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
priv->addr = addr;
|
||
|
priv->i2c = i2c;
|
||
|
priv->config = config;
|
||
|
nxsem_init(&priv->dev_sem, 0, 1);
|
||
|
|
||
|
ret = register_driver(devpath, &g_alsops, 0666, priv);
|
||
|
max44009_dbg("Registered with %d\n", ret);
|
||
|
if (ret < 0)
|
||
|
{
|
||
|
kmm_free(priv);
|
||
|
max44009_dbg("Error occurred during the driver registering\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
priv->config->irq_attach(priv->config, max44009_int_handler, priv);
|
||
|
priv->config->irq_enable(priv->config, false);
|
||
|
return ret;
|
||
|
}
|