sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
d932e0af2a
nuttx/drivers/wireless/bluetooth/Kconfig

89 lines
2.1 KiB
Plaintext
Raw Normal View History

Adds re-architected Bluetooth UART driver from the Intel/Zephyr arduino101_firmware_source-v1.tar package. Squashed commit of the following: drivers/bluetooth: Re-architect Bluetooth UART driver to follow upper/lower half model. Completely untested. drivers/bluetooth: Grr.. Another band-aid commit to stay in sync with master. Why is this so difficult drivers/bluetooth: Band-aid commit to stay in sync with master. Lost it somehow. drivers/wireless/bluetooth: A few changes, mostly thought experiments. drivers/wireless/bluetooth: UART-based Bluetooth driver ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. This initial commit is the original files in the NuttX build environment with changes to conform with the coding standard. It should not even build.
2018-03-30 02:36:03 +02:00
#
drivers/wireless/bluetooth: Partition bt_uart.c adding bt_uart.h and bt_uart_generic.c. This will now permit adding HCI UART drivers that have custom initialization requirements.. such as parts the need to download a configuration file to the HCI UART before they are usable.
2018-04-20 01:48:04 +02:00
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
Adds re-architected Bluetooth UART driver from the Intel/Zephyr arduino101_firmware_source-v1.tar package. Squashed commit of the following: drivers/bluetooth: Re-architect Bluetooth UART driver to follow upper/lower half model. Completely untested. drivers/bluetooth: Grr.. Another band-aid commit to stay in sync with master. Why is this so difficult drivers/bluetooth: Band-aid commit to stay in sync with master. Lost it somehow. drivers/wireless/bluetooth: A few changes, mostly thought experiments. drivers/wireless/bluetooth: UART-based Bluetooth driver ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. This initial commit is the original files in the NuttX build environment with changes to conform with the coding standard. It should not even build.
2018-03-30 02:36:03 +02:00
#
if DRIVERS_BLUETOOTH
config BLUETOOTH_UART
bool "Bluetooth UART driver"
default n
drivers/wireless/bluetooth: Default BAUD must be 115200, Fix logic in Rx callback, Rx callback must execute on work queue. Now sends and receives one command and response. But hangs on the next.
2018-04-17 21:07:28 +02:00
select SCHED_HPWORK
drivers: wireless: bluetooth: exclude BSD components from build Unless ALLOW_BSD_COMPONENTS is enabled support will not be built Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2022-02-21 09:10:37 +01:00
depends on ALLOW_BSD_COMPONENTS
Adds re-architected Bluetooth UART driver from the Intel/Zephyr arduino101_firmware_source-v1.tar package. Squashed commit of the following: drivers/bluetooth: Re-architect Bluetooth UART driver to follow upper/lower half model. Completely untested. drivers/bluetooth: Grr.. Another band-aid commit to stay in sync with master. Why is this so difficult drivers/bluetooth: Band-aid commit to stay in sync with master. Lost it somehow. drivers/wireless/bluetooth: A few changes, mostly thought experiments. drivers/wireless/bluetooth: UART-based Bluetooth driver ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. This initial commit is the original files in the NuttX build environment with changes to conform with the coding standard. It should not even build.
2018-03-30 02:36:03 +02:00
---help---
Enable Bluetooth UART driver.
drivers/wireless/bluetooth: Partition bt_uart.c adding bt_uart.h and bt_uart_generic.c. This will now permit adding HCI UART drivers that have custom initialization requirements.. such as parts the need to download a configuration file to the HCI UART before they are usable.
2018-04-20 01:48:04 +02:00
config BLUETOOTH_UART_GENERIC
bool
default n
drivers/wireless/bluetooth/bt_uart_bcm4343x.c: BCM4343x HCIUART support.
2019-10-04 17:29:51 +02:00
config BLUETOOTH_UART_SHIM
bool
default n
drivers/wireless/bluetooth: Partition bt_uart.c adding bt_uart.h and bt_uart_generic.c. This will now permit adding HCI UART drivers that have custom initialization requirements.. such as parts the need to download a configuration file to the HCI UART before they are usable.
2018-04-20 01:48:04 +02:00
if BLUETOOTH_UART
choice
prompt "Bluetooth UART HCI device"
default BLUETOOTH_UART_OTHER
config BLUETOOTH_UART_CC2564
bool "TI CC2564"
depends on EXPERIMENTAL
drivers/wireless/bluetooth/bt_uart_bcm4343x.c: BCM4343x HCIUART support.
2019-10-04 17:29:51 +02:00
config BLUETOOTH_BCM4343X
bool "Broadcom (Cypress) BCM4343X device support"
---help---
Enables download support for the bluetooth component of BCM4343X devices.
Note that firmware needs to be provided for these devices to operate. In
general this firmware is available in the Cypress WICED SDK.
drivers/wireless/bluetooth: Partition bt_uart.c adding bt_uart.h and bt_uart_generic.c. This will now permit adding HCI UART drivers that have custom initialization requirements.. such as parts the need to download a configuration file to the HCI UART before they are usable.
2018-04-20 01:48:04 +02:00
config BLUETOOTH_UART_OTHER
bool "Other generic HCI UART device"
select BLUETOOTH_UART_GENERIC
endchoice # Bluetooth UART HCI device
drivers/wireless: Add option to dump I/O buffers. Fix calculation of response length.
2018-04-18 20:46:47 +02:00
config BLUETOOTH_UART_DUMP
bool "Dump HCI UART I/O buffers"
default n
drivers/wireless/bluetooth: Partition bt_uart.c adding bt_uart.h and bt_uart_generic.c. This will now permit adding HCI UART drivers that have custom initialization requirements.. such as parts the need to download a configuration file to the HCI UART before they are usable.
2018-04-20 01:48:04 +02:00
depends on DEBUG_WIRELESS_INFO
drivers/wireless: Add option to dump I/O buffers. Fix calculation of response length.
2018-04-18 20:46:47 +02:00
---help---
Dump the full content of all outgoing and incoming messages.
drivers/wireless/bluetooth: Partition bt_uart.c adding bt_uart.h and bt_uart_generic.c. This will now permit adding HCI UART drivers that have custom initialization requirements.. such as parts the need to download a configuration file to the HCI UART before they are usable.
2018-04-20 01:48:04 +02:00
endif # BLUETOOTH_UART
wireless/bluetooth:add bt bridge codes Signed-off-by: chengkai <chengkai@xiaomi.com>
2022-08-26 13:47:25 +02:00
config BLUETOOTH_BRIDGE
bool "Bluetooth BT/BLE Dual Mode Bridge Driver"
default n
---help---
Enable Bluetooth BT/BLE Dual Mode Bridge Driver.
wireless/bluetooth:add btsnoop for bt bridge Signed-off-by: chengkai <chengkai@xiaomi.com>
2022-08-26 14:16:25 +02:00
config BLUETOOTH_BRIDGE_BTSNOOP
bool "Bluetooth bridge btsnoop support"
default n
depends on BLUETOOTH_BRIDGE
---help---
Enable Bluetooth hci btsnoop log
drivers/wireless/bluetooth: Add a NULL device to support some very low level testing on the Simulator.
2018-04-03 17:00:18 +02:00
config BLUETOOTH_NULL
bool "NULL Bluetooth device"
default n
---help---
A do-nothing Bluetooth device driver to permit some basic testing of
the Bluetooth stack on the simulator. This driver just "closes the
loop" and nothing more: It is a just a bit-bucket for outgoing
packets; it generates no incoming packets.
wireless/bluetooth: add RPMSG HCI controller support
2023-03-11 11:06:51 +01:00
config BLUETOOTH_RPMSG_SERVER
bool "RPMSG Bluetooth HCI server support"
bluetooth rpmsg depends on RPTUN
2023-10-27 13:32:19 +02:00
depends on EXPERIMENTAL && RPTUN
wireless/bluetooth: add RPMSG HCI controller support
2023-03-11 11:06:51 +01:00
default n
config BLUETOOTH_RPMSG
bool "RPMSG Bluetooth HCI client support"
bluetooth rpmsg depends on RPTUN
2023-10-27 13:32:19 +02:00
depends on EXPERIMENTAL && RPTUN
wireless/bluetooth: add RPMSG HCI controller support
2023-03-11 11:06:51 +01:00
default n
Adds re-architected Bluetooth UART driver from the Intel/Zephyr arduino101_firmware_source-v1.tar package. Squashed commit of the following: drivers/bluetooth: Re-architect Bluetooth UART driver to follow upper/lower half model. Completely untested. drivers/bluetooth: Grr.. Another band-aid commit to stay in sync with master. Why is this so difficult drivers/bluetooth: Band-aid commit to stay in sync with master. Lost it somehow. drivers/wireless/bluetooth: A few changes, mostly thought experiments. drivers/wireless/bluetooth: UART-based Bluetooth driver ported from the Intel/Zephyr arduino101_firmware_source-v1.tar package. This initial commit is the original files in the NuttX build environment with changes to conform with the coding standard. It should not even build.
2018-03-30 02:36:03 +02:00
endif # DRIVERS_BLUETOOTH
Reference in New Issue Copy Permalink