nuttx/configs/lpcxpresso-lpc54628/scripts/Make.defs

119 lines
4.5 KiB
Plaintext
Raw Normal View History

This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
############################################################################
# configs/lpcxpresso-lpc54628/scripts/Make.defs
#
# Copyright (C) 2017 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
# Setup for the kind of memory that we are executing from
LDSCRIPT = flash.ld
# Setup for Windows vs Linux/Cygwin/macOS environments
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mkwindeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
STRIP = $(CROSSDEV)strip --strip-unneeded
This adds basic architectural support for the LPC546xx family and includes support for the LPCXpresso-LPC54628 board. The basic NSH port is almost complete... still lacking GPIO support and LED support. There are still no significant drivers available. Squashed commit of the following: arch/arm/src/lpc54xx: Finish off some missing logic. Complete now execpt for GPIO and LED support. arch/arm/src/lpc54xx: Add lpc54_clrpend.c arch/arm/src/lpc54xx: Serial driver is complete and compiles. arch/arm/src/lpc54xx: Add beginning of a serial driver (still missing some logic) arch/arm/src/lpc54xx: Fleshes out low level USART intialization. arch/arm/src/lpc546xx/Kconfig: Add hooks to integrate with common seril upper half. arch/arm/src/lpc54xx: Beginning of USART console support. arch/arm/src/lpc54xx: Completes very basic clock configuration. arch/arm/src/lpc54xx: Add clocking logic (still not complete) arch/arm/src/lpc54xx: Beginning of PLL configuration logic. arch/arm/src/lpc54xx: Fix a few things from first compile attempt. Compilation cannot work until I at least finish the clock configuration logic. arch/arm/src/lpc54xx: Addes some SysTick logic. arch/arm/src/lpc54xx: Completes basic startup logic (sans clock configuration) and interrupt configuration. arch/arm/src/lpc54xx: Add generic ARMv7-M start-up logic (needs LPC54628 customizations); add emtpy file that will eventually hold the clock configuration logic. arch/arm/src/lpc54xx: Add (incomplete) SYSCON register definition header file. arch/arm/src/lpc54xx: Add FLEXCOMM header file. arch/arm/src/lpc54xx: Bring in tickless clock logic from LPC43; configs/lpcxpresso-lpc54628: mount procfs if enabled. arch/arm/src/lpc54xx: Add RIT clock definitions; add SysTick initialization (not finished) LPC54xx and LPCXpresso-LPC54628: add more boilerplate files and stubbed out files. arch/arm/src/lpc54xx: Add (incomplete) USART header file. Add another condition to a Kconfig; refresh a defconfig. arch/arm/src/lpc54xx/chip: Add LPC54628 memory map header files. configs/lpcxpresso-lpc54628: Add basic build files for the LPCXpresso-LPC54628 arch/: Basic build directory structure for the LPC54628
2017-12-07 20:30:02 +01:00
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
endif
ifneq ($(CONFIG_DEBUG_NOOPT),y)
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
ASMEXT = .S
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
HOSTLDFLAGS =