nuttx/arch/arm/src/stm32/stm32_rtc.c

/************************************************************************************
 * arch/arm/src/stm32/stm32_rtc.c
 *
 *   Copyright (C) 2011 Uros Platise. All rights reserved.
 *   Author: Uros Platise <uros.platise@isotel.eu>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ************************************************************************************/

/* The STM32 RTC Driver offers standard precision of 1 Hz or High Resolution
 * operating at rate up to 16384 Hz. It provides UTC time and alarm interface
 * with external output pin (for wake-up).
 * 
 * RTC is based on hardware RTC module which is located in a separate power 
 * domain. The 32-bit counter is extended by 16-bit registers in BKP domain 
 * STM32_BKP_DR1 to provide system equiv. function to the: time_t time(time_t *).
 * 
 * Notation: 
 *  - clock refers to 32-bit hardware counter
 *  - time is a combination of clock and upper bits stored in backuped domain
 *    with unit of 1 [s]
 * 
 * TODO: Error Handling in case LSE fails during start-up or during operation.
 */

/************************************************************************************
 * Included Files
 ************************************************************************************/

#include <nuttx/config.h>
#include <nuttx/arch.h>
#include <nuttx/irq.h>
#include <nuttx/rtc.h>
#include <arch/board/board.h>

#include <stdlib.h>
#include <stdint.h>
#include <stdbool.h>
#include <stdio.h>

#include "up_arch.h"

#include "stm32_pwr.h"
#include "stm32_rcc.h"
#include "stm32_rtc.h"
#include "stm32_waste.h"

/************************************************************************************
 * Pre-processor Definitions
 ************************************************************************************/
/* Configuration ********************************************************************/

#ifdef CONFIG_RTC_HIRES
#  ifndef CONFIG_RTC_FREQUENCY
#    error "CONFIG_RTC_FREQUENCY is required for CONFIG_RTC_HIRES"
#  elif CONFIG_RTC_FREQUENCY != 16384
#    error "Only hi-res CONFIG_RTC_FREQUENCY of 16384Hz is supported"
#  endif
#else
#  ifndef CONFIG_RTC_FREQUENCY
#    define CONFIG_RTC_FREQUENCY 1
#  endif
#  if CONFIG_RTC_FREQUENCY != 1
#    error "Only lo-res CONFIG_RTC_FREQUENCY of 1Hz is supported"
#  endif
#endif

#ifndef CONFIG_STM32_BKP
#  error "CONFIG_STM32_BKP is required for CONFIG_RTC"
#endif

/* RTC/BKP Definitions *************************************************************/
/* STM32_RTC_PRESCALAR_VALUE
 *   RTC pre-scalar value.  The RTC is driven by a 32,768Hz input clock.  This input
 *   value is divided by this value (plus one) to generate the RTC frequency.
 * RTC_TIMEMSB_REG
 *   The BKP module register used to hold the RTC overflow value.  Overflows are
 *   only handled in hi-res mode.
 * RTC_CLOCKS_SHIFT
 *   The shift used to convert the hi-res timer LSB to one second.  Not used with
 *   the lo-res timer.
 */

#ifdef CONFIG_RTC_HIRES
#  define STM32_RTC_PRESCALAR_VALUE STM32_RTC_PRESCALER_MIN
#  define RTC_TIMEMSB_REG           STM32_BKP_DR1
#  define RTC_CLOCKS_SHIFT          14
#else
#  define STM32_RTC_PRESCALAR_VALUE STM32_RTC_PRESCALER_SECOND
#endif

/************************************************************************************
 * Private Types
 ************************************************************************************/

struct rtc_regvals_s
{
  uint16_t cntl;
  uint16_t cnth;
#ifdef CONFIG_RTC_HIRES
  uint16_t ovf;
#endif
};

/************************************************************************************
 * Private Data
 ************************************************************************************/

/* Callback to use when the alarm expires */

#ifdef CONFIG_RTC_ALARM
static alarmcb_t g_alarmcb;
#endif

/************************************************************************************
 * Public Data
 ************************************************************************************/

/* Variable determines the state of the LSE oscilator. 
 * Possible errors:
 *   - on start-up
 *   - during operation, reported by LSE interrupt
 */

volatile bool g_rtc_enabled = false;

/************************************************************************************
 * Private Functions
 ************************************************************************************/

/************************************************************************************
 * Name: stm32_rtc_beginwr
 *
 * Description:
 *   Enter configuration mode
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   None
 *
 ************************************************************************************/

static inline void stm32_rtc_beginwr(void)
{
  /* Previous write is done? */

  while ((getreg16(STM32_RTC_CRL) & RTC_CRL_RTOFF) == 0)
    {
      up_waste();
    }

  /* Enter Config mode, Set Value and Exit */

  modifyreg16(STM32_RTC_CRL, 0, RTC_CRL_CNF);
}

/************************************************************************************
 * Name: stm32_rtc_endwr
 *
 * Description:
 *   Exit configuration mode
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   None
 *
 ************************************************************************************/

static inline void stm32_rtc_endwr(void)
{
  modifyreg16(STM32_RTC_CRL, RTC_CRL_CNF, 0);
}

/************************************************************************************
 * Name: stm32_rtc_wait4rsf
 *
 * Description:
 *   Wait for registers to synchronise with RTC module, call after power-up only
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   None
 *
 ************************************************************************************/

static inline void stm32_rtc_wait4rsf(void)
{
  modifyreg16(STM32_RTC_CRL, RTC_CRL_RSF, 0);
  while ((getreg16(STM32_RTC_CRL) & RTC_CRL_RSF) == 0)
    {
      up_waste();
    }
}

/************************************************************************************
 * Name: up_rtc_breakout
 *
 * Description:
 *   Set the RTC to the provided time.
 *
 * Input Parameters:
 *   tp - the time to use
 *
 * Returned Value:
 *   None
 *
 ************************************************************************************/

#ifdef CONFIG_RTC_HIRES
static void up_rtc_breakout(FAR const struct timespec *tp,
                            FAR struct rtc_regvals_s *regvals)
{
  uint64_t frac;
  uint32_t cnt;
  uint16_t ovf;
  
  /* Break up the time in seconds + milleconds into the correct values for our use */

  frac = ((uint64_t)tp->tv_nsec * CONFIG_RTC_FREQUENCY) / 1000000000;
  cnt  = (tp->tv_sec << RTC_CLOCKS_SHIFT) | ((uint32_t)frac & (CONFIG_RTC_FREQUENCY-1));
  ovf  = (tp->tv_sec >> (32 - RTC_CLOCKS_SHIFT));

  /* Then return the broken out time */

  regvals->cnth = cnt >> 16;
  regvals->cntl = cnt & 0xffff;
  regvals->ovf  = ovf;
}
#else
static inline void up_rtc_breakout(FAR const struct timespec *tp,
                                   FAR struct rtc_regvals_s *regvals)
{
  /* The low-res timer is easy... tv_sec holds exactly the value needed by the
   * CNTH/CNTL registers.
   */

  regvals->cnth = (uint16_t)((uint32_t)tp->tv_sec >> 16);
  regvals->cntl = (uint16_t)((uint32_t)tp->tv_sec & 0xffff);
}
#endif

/************************************************************************************
 * Name: stm32_rtc_interrupt
 *
 * Description:
 *    RTC interrupt service routine
 *
 * Input Parameters:
 *   irq - The IRQ number that generated the interrupt
 *   context - Architecture specific register save information.
 *
 * Returned Value:
 *   Zero (OK) on success; A negated errno value on failure.
 *
 ************************************************************************************/

#if defined(CONFIG_RTC_HIRES) || defined(CONFIG_RTC_ALARM)
static int stm32_rtc_interrupt(int irq, void *context)
{
  uint16_t source = getreg16(STM32_RTC_CRL);

#ifdef CONFIG_RTC_HIRES
  if ((source & RTC_CRL_OWF) != 0)
    {
      putreg16(getreg16(RTC_TIMEMSB_REG) + 1, RTC_TIMEMSB_REG);
    }
#endif

#ifdef CONFIG_RTC_ALARM
  if ((source & RTC_CRL_ALRF) != 0 && g_alarmcb != NULL)
    {
      /* Alarm callback */

      g_alarmcb();
      g_alarmcb = NULL;
    }
#endif

  /* Clear pending flags, leave RSF high */
    
  putreg16(RTC_CRL_RSF, STM32_RTC_CRL);    
  return 0;
}
#endif

/************************************************************************************
 * Public Functions
 ************************************************************************************/

/************************************************************************************
 * Name: up_rtcinitialize
 *
 * Description:
 *   Initialize the hardware RTC per the select configuration.  This function is
 *   called once during the OS initialization sequence
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   Zero (OK) on success; a negated errno on failure
 *
 ************************************************************************************/

int up_rtcinitialize(void)
{
  /* Set access to the peripheral, enable the backup domain (BKP) and the lower power
   * extern 32,768Hz LSE oscillator.
   */

  stm32_pwr_enablebkp();
  stm32_rcc_enablelse();
    
  /* TODO: Get state from this function, if everything is 
   *   okay and whether it is already enabled (if it was disabled
   *   reset upper time register)
   */

  g_rtc_enabled = true;

  /* TODO: Possible stall? should we set the timeout period? and return with -1 */

  stm32_rtc_wait4rsf();

  /* Configure prescaler, note that these are write-only registers */

  stm32_rtc_beginwr();
  putreg16(STM32_RTC_PRESCALAR_VALUE >> 16,    STM32_RTC_PRLH);
  putreg16(STM32_RTC_PRESCALAR_VALUE & 0xffff, STM32_RTC_PRLL);
  stm32_rtc_endwr();

  /* Configure RTC interrupt to catch overflow and alarm interrupts. */

#if defined(CONFIG_RTC_HIRES) || defined(CONFIG_RTC_ALARM)
  irq_attach(STM32_IRQ_RTC, stm32_rtc_interrupt);
  up_enable_irq(STM32_IRQ_RTC);
#endif

  /* Previous write is done? This is required prior writing into CRH */

  while ((getreg16(STM32_RTC_CRL) & RTC_CRL_RTOFF) == 0)
    {
      up_waste();
    }
  modifyreg16(STM32_RTC_CRH, 0, RTC_CRH_OWIE);

  /* Alarm Int via EXTI Line */

  /* STM32_IRQ_RTCALR  41: RTC alarm through EXTI line interrupt */

  return OK;
}

/************************************************************************************
 * Name: up_rtc_time
 *
 * Description:
 *   Get the current time in seconds.
 *
 * Input Parameters:
 *   None
 *
 * Returned Value:
 *   The current time in seconds
 *
 ************************************************************************************/

#ifdef CONFIG_RTC_HIRES
time_t up_rtc_time(void)
{
  struct timespec ts;

  /* In the hi-res case, this function is just a wrapper for up_rtc_gettime */

  (void)up_rtc_gettime(&ts);
  return ts.tv_sec;
}
#else
time_t up_rtc_time(void)
{
  irqstate_t flags;
  uint16_t cnth;
  uint16_t cntl;
  uint16_t tmp;

  /* The RTC counter is read from two 16-bit registers to form one 32-bit
   * value.  Because these are non-atomic operations, many things can happen
   * between the two reads:  This thread could get suspended or interrrupted
   * or the lower 16-bit counter could rollover between reads.  Disabling
   * interrupts will prevent suspensions and interruptions:
   */

  flags = irqsave();

  /* And the following loop will handle any clock rollover events that may
   * happen between samples.  Most of the time (like 99.9%), the following
   * loop will execute only once.  In the rare rollover case, it should
   * execute no more than 2 times.
   */

  do
    {
      tmp  = getreg16(STM32_RTC_CNTL);
      cnth = getreg16(STM32_RTC_CNTH);
      cntl = getreg16(STM32_RTC_CNTL);
    }

  /* The second sample of CNTL could be less than the first sample of CNTL
   * only if rollover occurred.  In that case, CNTH may or may not be out
   * of sync.  The best thing to do is try again until we know that no
   * rollover occurred.
   */

  while (cntl < tmp);
  irqrestore(flags);

  /* Okay.. the samples should be as close together in time as possible and
   * we can be assured that no clock rollover occurred between the samples.
   *
   * Return the time in seconds.
   */

  return (time_t)cnth << 16 | (time_t)cntl;
}
#endif

/************************************************************************************
 * Name: up_rtc_gettime
 *
 * Description:
 *   Get the current time from the high resolution RTC clock.
 *
 * Input Parameters:
 *   tp - The location to return the high resolution time value.
 *
 * Returned Value:
 *   Zero (OK) on success; a negated errno on failure
 *
 ************************************************************************************/

#ifdef CONFIG_RTC_HIRES
int up_rtc_gettime(FAR struct timespec *tp)
{
  irqstate_t flags;
  uint32_t ls;
  uint32_t ms;
  uint16_t ovf;
  uint16_t cnth;
  uint16_t cntl;
  uint16_t tmp;

  /* The RTC counter is read from two 16-bit registers to form one 32-bit
   * value.  Because these are non-atomic operations, many things can happen
   * between the two reads:  This thread could get suspended or interrrupted
   * or the lower 16-bit counter could rollover between reads.  Disabling
   * interrupts will prevent suspensions and interruptions:
   */

  flags = irqsave();

  /* And the following loop will handle any clock rollover events that may
   * happen between samples.  Most of the time (like 99.9%), the following
   * loop will execute only once.  In the rare rollover case, it should
   * execute no more than 2 times.
   */

  do
    {
      tmp  = getreg16(STM32_RTC_CNTL);
      cnth = getreg16(STM32_RTC_CNTH);
      ovf  = getreg16(RTC_TIMEMSB_REG);
      cntl = getreg16(STM32_RTC_CNTL);
    }

  /* The second sample of CNTL could be less than the first sample of CNTL
   * only if rollover occurred.  In that case, CNTH may or may not be out
   * of sync.  The best thing to do is try again until we know that no
   * rollover occurred.
   */

  while (cntl < tmp);
  irqrestore(flags);

  /* Okay.. the samples should be as close together in time as possible and
   * we can be assured that no clock rollover occurred between the samples.
   *
   * Create a 32-bit value from the LS and MS 16-bit RTC counter values and
   * from the MS and overflow 16-bit counter values.
   */

  ls = (uint32_t)cnth << 16 | (uint32_t)cntl;
  ms = (uint32_t)ovf  << 16 | (uint32_t)cnth;
  
  /* Then we can save the time in seconds and fractional seconds. */

  tp->tv_sec  = (ms << (32-RTC_CLOCKS_SHIFT-16)) | (ls >> (RTC_CLOCKS_SHIFT+16));
  tp->tv_nsec = (ls & (CONFIG_RTC_FREQUENCY-1)) * (1000000000/CONFIG_RTC_FREQUENCY);
  return OK;
}
#endif

/************************************************************************************
 * Name: up_rtc_settime
 *
 * Description:
 *   Set the RTC to the provided time.
 *
 * Input Parameters:
 *   tp - the time to use
 *
 * Returned Value:
 *   Zero (OK) on success; a negated errno on failure
 *
 ************************************************************************************/

int up_rtc_settime(FAR const struct timespec *tp)
{
  struct rtc_regvals_s regvals;
  irqstate_t flags;

  /* Break out the time values */

  up_rtc_breakout(tp, &regvals);

  /* Then write the broken out values to the RTC counter and BKP overflow register
   * (hi-res mode only)
   */

  flags = irqsave();
  stm32_rtc_beginwr();
  putreg16(regvals.cnth, STM32_RTC_CNTH);
  putreg16(regvals.cntl, STM32_RTC_CNTL);
  stm32_rtc_endwr();

#ifdef CONFIG_RTC_HIRES
  putreg16(regvals.ovf, RTC_TIMEMSB_REG);
#endif
  irqrestore(flags);
  return OK;
}

/************************************************************************************
 * Name: up_rtc_setalarm
 *
 * Description:
 *   Set up a alarm.
 *
 * Input Parameters:
 *   tp - the time to set the alarm
 *   callback - the function to call when the alarm expires.
 *
 * Returned Value:
 *   Zero (OK) on success; a negated errno on failure
 *
 ************************************************************************************/

#ifdef CONFIG_RTC_ALARM
int up_rtc_setalarm(FAR const struct timespec *tp, alarmcb_t callback);
{
  struct rtc_regvals_s regvals;
  irqstate_t flags;
  int ret = -EBUSY;

  /* Is there already something waiting on the ALARM? */

  if (g_alarmcb == NULL)
    {
      /* No.. Save the callback function pointer */

      g_alarmcb = callback;

      /* Break out the time values */
  
      up_rtc_breakout(tp, &regvals);

      /* The set the alarm */

      flags = irqsave();
      stm32_rtc_beginwr();
      putreg16(regvals.cnth, STM32_RTC_ALRH);
      putreg16(regvals.cntl, STM32_RTC_ALRL);
      stm32_rtc_endwr();
      irqrestore(flags);

      ret = OK;
    }
  return ret;
}
#endif