nuttx/sched/wd_start.c

/****************************************************************************
 * sched/wd_start.c
 *
 *   Copyright (C) 2007-2009 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <sys/types.h>

#include <stdarg.h>
#include <wdog.h>
#include <unistd.h>
#include <sched.h>
#include <errno.h>

#include <nuttx/arch.h>

#include "os_internal.h"
#include "wd_internal.h"

/****************************************************************************
 * Definitions
 ****************************************************************************/

/****************************************************************************
 * Private Type Declarations
 ****************************************************************************/

typedef void (*wdentry0_t)(int argc);
#if CONFIG_MAX_WDOGPARMS > 0
typedef void (*wdentry1_t)(int argc, uint32 arg1);
#endif
#if CONFIG_MAX_WDOGPARMS > 1
typedef void (*wdentry2_t)(int argc, uint32 arg1, uint32 arg2);
#endif
#if CONFIG_MAX_WDOGPARMS > 2
typedef void (*wdentry3_t)(int argc, uint32 arg1, uint32 arg2,
                           uint32 arg3);
#endif
#if CONFIG_MAX_WDOGPARMS > 3
typedef void (*wdentry4_t)(int argc, uint32 arg1, uint32 arg2,
                           uint32 arg3, uint32 arg4);
#endif

/****************************************************************************
 * Global Variables
 ****************************************************************************/

/****************************************************************************
 * Private Variables
 ****************************************************************************/

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Function:  wd_start
 *
 * Description:
 *   This function adds a watchdog to the timer queue.  The 
 *   specified watchdog function will be called from the
 *   interrupt level after the specified number of ticks has
 *   elapsed. Watchdog timers may be started from the
 *   interrupt level.
 *
 *   Watchdog timers execute in the address enviroment that
 *   was in effect when wd_start() is called.
 *
 *   Watchdog timers execute only once.
 *
 *   To replace either the timeout delay or the function to
 *   be executed, call wd_start again with the same wdog; only
 *   the most recent wdStart() on a given watchdog ID has
 *   any effect.
 *
 * Parameters:
 *   wdog     = watchdog ID
 *   delay    = Delay count in clock ticks
 *   wdentry  = function to call on timeout
 *   parm1..4 = parameters to pass to wdentry
 *
 * Return Value:
 *   OK or ERROR
 *
 * Assumptions:
 *   The watchdog routine runs in the context of the timer interrupt
 *   handler and is subject to all ISR restrictions.
 *
 ****************************************************************************/

STATUS wd_start(WDOG_ID wdog, int delay, wdentry_t wdentry,  int argc, ...)
{
  va_list    ap;
  FAR wdog_t *curr;
  FAR wdog_t *prev;
  FAR wdog_t *next;
  sint32     now;
  irqstate_t saved_state;
  int        i;

  /* Verify the wdog */

  if (!wdog || argc > CONFIG_MAX_WDOGPARMS || delay < 0)
    {
      *get_errno_ptr() = EINVAL;
      return ERROR;
    }

  /* Check if the watchdog has been started. If so, stop it.
   * NOTE:  There is a race condition here... the caller may receive
   * the watchdog between the time that wd_start is called and
   * the critical section is established.
   */

  saved_state = irqsave();
  if (wdog->active)
    {
      wd_cancel(wdog);
    }

  /* Save the data in the watchdog structure */

  wdog->func = wdentry;         /* Function to execute when delay expires */
  up_getpicbase(&wdog->picbase);
  wdog->argc = argc;

  va_start(ap, argc);
  for (i = 0; i < argc; i++)
    {
      wdog->parm[i] = va_arg(ap, uint32);
    }
#ifdef CONFIG_DEBUG
  for (; i < CONFIG_MAX_WDOGPARMS; i++)
    {
      wdog->parm[i] = 0;
    }
#endif
  va_end(ap);

  /* Calculate delay+1, forcing the delay into a range that we can handle */

  if (delay <= 0)
    {
      delay = 1;
    }
  else if (++delay <= 0)
    {
      delay--;
    }

  /* Do the easy case first -- when the watchdog timer queue is empty. */

  if (g_wdactivelist.head == NULL)
    {
      sq_addlast((FAR sq_entry_t*)wdog,&g_wdactivelist);
    }

  /* There are other active watchdogs in the timer queue */

  else
    {
      now = 0;
      prev = curr = (FAR wdog_t*)g_wdactivelist.head;

      /* Advance to positive time */

      while ((now += curr->lag) < 0 && curr->next)
        {
          prev = curr;
          curr = curr->next;
        }

      /* Advance past shorter delays */

      while (now <= delay && curr->next)
       {
         prev = curr;
         curr = curr->next;
         now += curr->lag;
       }

      /* Check if the new wdog must be inserted before the curr. */

      if (delay < now)
        {
          /* The relative delay time is smaller or equal to the current delay
           * time, so decrement the current delay time by the new relative
           * delay time.
           */

          delay -= (now - curr->lag);
          curr->lag -= delay;

          /* Insert the new watchdog in the list */

          if (curr == (FAR wdog_t*)g_wdactivelist.head)
            {
              sq_addfirst((FAR sq_entry_t*)wdog, &g_wdactivelist);
            }
          else
            {
              sq_addafter((FAR sq_entry_t*)prev, (FAR sq_entry_t*)wdog,
                          &g_wdactivelist);
            }
        }

      /* The new watchdog delay time is greater than the curr delay time,
       * so the new wdog must be inserted after the curr. This only occurs
       * if the wdog is to be added to the end of the list.
       */

      else
        {
          delay -= now;
          if (!curr->next)
            {
              sq_addlast((FAR sq_entry_t*)wdog, &g_wdactivelist);
            }
          else
            {
              next = curr->next;
              next->lag -= delay;
              sq_addafter((FAR sq_entry_t*)curr, (FAR sq_entry_t*)wdog,
                          &g_wdactivelist);
            }
        }
    }

  /* Put the lag into the watchdog structure and mark it as active. */

  wdog->lag = delay;
  wdog->active = TRUE;

  irqrestore(saved_state);
  return OK;
}

/****************************************************************************
 * Function:  wd_timer
 *
 * Description:
 *   This function is called from the timer interrupt handler to determine
 *   if it is time to execute a watchdog function.  If so, the watchdog
 *   function will be executed in the context of the timer interrupt handler.
 *
 * Parameters:
 *   None
 *
 * Return Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

void wd_timer(void)
{
  pid_t       pid;
  FAR wdog_t *wdog;

  /* Check if there are any active watchdogs to process */

  if (g_wdactivelist.head)
    {
      /* There are.  Decrement the lag counter */

      --(((FAR wdog_t*)g_wdactivelist.head)->lag);

      /* Check if the watchdog at the head of the list is ready to run */

      if (((FAR wdog_t*)g_wdactivelist.head)->lag <= 0)
        {
          /* Process the watchdog at the head of the list as well as any
           * other watchdogs that became ready to run at this time
           */

          while (g_wdactivelist.head &&
                 ((FAR wdog_t*)g_wdactivelist.head)->lag <= 0)
            {
              /* Remove the watchdog from the head of the list */

              wdog = (FAR wdog_t*)sq_remfirst(&g_wdactivelist);

              /* If there is another watchdog behind this one, update its
               * its lag (this shouldn't be necessary).
               */

              if (g_wdactivelist.head)
                {
                  ((FAR wdog_t*)g_wdactivelist.head)->lag += wdog->lag;
                }

              /* Indicate that the watchdog is no longer active. */

              wdog->active = FALSE;

              /* Get the current task's process ID.  We'll need this later to
               * see if the watchdog function caused a context switch.
               */

              pid = getpid();

              /* Execute the watchdog function */

              up_setpicbase(wdog->picbase);
              switch (wdog->argc)
                {
                  default:
#ifdef CONFIG_DEBUG
                    PANIC(OSERR_INTERNAL);
#endif
                  case 0:
                    (*((wdentry0_t)(wdog->func)))(0);
                    break;

#if CONFIG_MAX_WDOGPARMS > 0
                  case 1:
                    (*((wdentry1_t)(wdog->func)))(1, wdog->parm[0]);
                    break;
#endif
#if CONFIG_MAX_WDOGPARMS > 1
                  case 2:
                    (*((wdentry2_t)(wdog->func)))(2,
                                    wdog->parm[0], wdog->parm[1]);
                    break;
#endif
#if CONFIG_MAX_WDOGPARMS > 2
                  case 3:
                    (*((wdentry3_t)(wdog->func)))(3,
                                    wdog->parm[0], wdog->parm[1],
                                    wdog->parm[2]);
                    break;
#endif
#if CONFIG_MAX_WDOGPARMS > 3
                  case 4:
                    (*((wdentry4_t)(wdog->func)))(4,
                                    wdog->parm[0], wdog->parm[1],
                                    wdog->parm[2] ,wdog->parm[3]);
                    break;
#endif
                }
            }
        }
    }
}