nuttx/mm/mm_heap/mm_malloc.c

257 lines
7.0 KiB
C
Raw Normal View History

/****************************************************************************
* mm/mm_heap/mm_malloc.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <assert.h>
#include <debug.h>
Merged in paimonen/nuttx/pullreq_libc_libnx_updates (pull request #757) Pullreq libc libnx updates * NuttX: make strerror() return 'Success' for 0 * NuttX: fix strrchr() so that it considers null terminator as part of string From strrchr(3) man page: "The terminating null byte is considered part of the string, so that if c is specified as '\0', these functions return a pointer to the terminator." * NuttX: mm_free(): Add DEBUGASSERT()'s to catch memory corruption early. It's easier to find the source when asserts fail already when freeing an overflowed buffer, than if the corruption is only detected on next malloc(). * MM_FILL_ALLOCATIONS: Add debug option to fill all mallocs() This is helpful for detecting uninitialized variables, especially in C++ code. I seem to be forgetting to initialize member variables and then they just get random values.. * NuttX: nxtk_bitmapwindow: Fix warning message when bitmap is fully off-screen. * nxfonts_getfont: Avoid unnecessary warnings for other whitespace chars also. * NuttX: Fix kerning of 'I' in Sans17x22 font The I character was running together with some other characters, e.g. in sequence "IMI". * NXMU: Revalidate window pointer for mouse events. NXMU caches the previous window pointer so that further mouse events can be sent to the same window. However, if the window is destroyed while mouse button is held down, the pointer may become invalid and cause a crash. This patch revalidates the pointer before using it. Approved-by: GregoryN <gnutt@nuttx.org>
2018-11-12 16:36:35 +01:00
#include <string.h>
#include <nuttx/arch.h>
#include <nuttx/mm/mm.h>
#include "mm_heap/mm.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifndef NULL
# define NULL ((void *)0)
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
static void mm_free_delaylist(FAR struct mm_heap_s *heap)
{
#if defined(CONFIG_BUILD_FLAT) || defined(__KERNEL__)
FAR struct mm_heap_impl_s *heap_impl;
FAR struct mm_delaynode_s *tmp;
irqstate_t flags;
DEBUGASSERT(MM_IS_VALID(heap));
heap_impl = heap->mm_impl;
/* Move the delay list to local */
flags = enter_critical_section();
tmp = heap_impl->mm_delaylist;
heap_impl->mm_delaylist = NULL;
leave_critical_section(flags);
/* Test if the delayed is empty */
while (tmp)
{
FAR void *address;
/* Get the first delayed deallocation */
address = tmp;
tmp = tmp->flink;
/* The address should always be non-NULL since that was checked in the
* 'while' condition above.
*/
mm_free(heap, address);
}
#endif
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: mm_malloc
*
* Description:
* Find the smallest chunk that satisfies the request. Take the memory from
* that chunk, save the remaining, smaller chunk (if any).
*
* 8-byte alignment of the allocated data is assured.
*
****************************************************************************/
FAR void *mm_malloc(FAR struct mm_heap_s *heap, size_t size)
{
FAR struct mm_heap_impl_s *heap_impl;
FAR struct mm_freenode_s *node;
size_t alignsize;
FAR void *ret = NULL;
int ndx;
DEBUGASSERT(MM_IS_VALID(heap));
heap_impl = heap->mm_impl;
/* Firstly, free mm_delaylist */
mm_free_delaylist(heap);
/* Ignore zero-length allocations */
if (size < 1)
{
return NULL;
}
/* Adjust the size to account for (1) the size of the allocated node and
* (2) to make sure that it is an even multiple of our granule size.
*/
alignsize = MM_ALIGN_UP(size + SIZEOF_MM_ALLOCNODE);
2017-11-22 14:30:48 +01:00
DEBUGASSERT(alignsize >= size); /* Check for integer overflow */
2020-02-13 09:06:05 +01:00
DEBUGASSERT(alignsize >= MM_MIN_CHUNK);
DEBUGASSERT(alignsize >= SIZEOF_MM_FREENODE);
/* We need to hold the MM semaphore while we muck with the nodelist. */
mm_takesemaphore(heap);
/* Get the location in the node list to start the search. Special case
* really big allocations
*/
if (alignsize >= MM_MAX_CHUNK)
{
ndx = MM_NNODES - 1;
}
else
{
/* Convert the request size into a nodelist index */
ndx = mm_size2ndx(alignsize);
}
/* Search for a large enough chunk in the list of nodes. This list is
* ordered by size, but will have occasional zero sized nodes as we visit
* other mm_nodelist[] entries.
*/
for (node = heap_impl->mm_nodelist[ndx].flink;
node && node->size < alignsize;
node = node->flink)
2020-02-13 09:06:05 +01:00
{
DEBUGASSERT(node->blink->flink == node);
}
/* If we found a node with non-zero size, then this is one to use. Since
* the list is ordered, we know that is must be best fitting chunk
* available.
*/
if (node)
{
FAR struct mm_freenode_s *remainder;
FAR struct mm_freenode_s *next;
size_t remaining;
/* Remove the node. There must be a predecessor, but there may not be
* a successor node.
*/
DEBUGASSERT(node->blink);
node->blink->flink = node->flink;
if (node->flink)
{
node->flink->blink = node->blink;
}
/* Check if we have to split the free node into one of the allocated
* size and another smaller freenode. In some cases, the remaining
* bytes can be smaller (they may be SIZEOF_MM_ALLOCNODE). In that
* case, we will just carry the few wasted bytes at the end of the
* allocation.
*/
remaining = node->size - alignsize;
if (remaining >= SIZEOF_MM_FREENODE)
{
/* Get a pointer to the next node in physical memory */
next = (FAR struct mm_freenode_s *)
(((FAR char *)node) + node->size);
/* Create the remainder node */
remainder = (FAR struct mm_freenode_s *)
(((FAR char *)node) + alignsize);
remainder->size = remaining;
remainder->preceding = alignsize;
/* Adjust the size of the node under consideration */
node->size = alignsize;
/* Adjust the 'preceding' size of the (old) next node, preserving
* the allocated flag.
*/
next->preceding = remaining | (next->preceding & MM_ALLOC_BIT);
/* Add the remainder back into the nodelist */
mm_addfreechunk(heap, remainder);
}
/* Handle the case of an exact size match */
node->preceding |= MM_ALLOC_BIT;
ret = (FAR void *)((FAR char *)node + SIZEOF_MM_ALLOCNODE);
}
2020-02-13 09:06:05 +01:00
DEBUGASSERT(ret == NULL || mm_heapmember(heap, ret));
mm_givesemaphore(heap);
Merged in paimonen/nuttx/pullreq_libc_libnx_updates (pull request #757) Pullreq libc libnx updates * NuttX: make strerror() return 'Success' for 0 * NuttX: fix strrchr() so that it considers null terminator as part of string From strrchr(3) man page: "The terminating null byte is considered part of the string, so that if c is specified as '\0', these functions return a pointer to the terminator." * NuttX: mm_free(): Add DEBUGASSERT()'s to catch memory corruption early. It's easier to find the source when asserts fail already when freeing an overflowed buffer, than if the corruption is only detected on next malloc(). * MM_FILL_ALLOCATIONS: Add debug option to fill all mallocs() This is helpful for detecting uninitialized variables, especially in C++ code. I seem to be forgetting to initialize member variables and then they just get random values.. * NuttX: nxtk_bitmapwindow: Fix warning message when bitmap is fully off-screen. * nxfonts_getfont: Avoid unnecessary warnings for other whitespace chars also. * NuttX: Fix kerning of 'I' in Sans17x22 font The I character was running together with some other characters, e.g. in sequence "IMI". * NXMU: Revalidate window pointer for mouse events. NXMU caches the previous window pointer so that further mouse events can be sent to the same window. However, if the window is destroyed while mouse button is held down, the pointer may become invalid and cause a crash. This patch revalidates the pointer before using it. Approved-by: GregoryN <gnutt@nuttx.org>
2018-11-12 16:36:35 +01:00
#ifdef CONFIG_MM_FILL_ALLOCATIONS
if (ret)
{
memset(ret, 0xaa, alignsize - SIZEOF_MM_ALLOCNODE);
Merged in paimonen/nuttx/pullreq_libc_libnx_updates (pull request #757) Pullreq libc libnx updates * NuttX: make strerror() return 'Success' for 0 * NuttX: fix strrchr() so that it considers null terminator as part of string From strrchr(3) man page: "The terminating null byte is considered part of the string, so that if c is specified as '\0', these functions return a pointer to the terminator." * NuttX: mm_free(): Add DEBUGASSERT()'s to catch memory corruption early. It's easier to find the source when asserts fail already when freeing an overflowed buffer, than if the corruption is only detected on next malloc(). * MM_FILL_ALLOCATIONS: Add debug option to fill all mallocs() This is helpful for detecting uninitialized variables, especially in C++ code. I seem to be forgetting to initialize member variables and then they just get random values.. * NuttX: nxtk_bitmapwindow: Fix warning message when bitmap is fully off-screen. * nxfonts_getfont: Avoid unnecessary warnings for other whitespace chars also. * NuttX: Fix kerning of 'I' in Sans17x22 font The I character was running together with some other characters, e.g. in sequence "IMI". * NXMU: Revalidate window pointer for mouse events. NXMU caches the previous window pointer so that further mouse events can be sent to the same window. However, if the window is destroyed while mouse button is held down, the pointer may become invalid and cause a crash. This patch revalidates the pointer before using it. Approved-by: GregoryN <gnutt@nuttx.org>
2018-11-12 16:36:35 +01:00
}
#endif
/* If CONFIG_DEBUG_MM is defined, then output the result of the allocation
* to the SYSLOG.
*/
#ifdef CONFIG_DEBUG_MM
if (!ret)
{
mwarn("WARNING: Allocation failed, size %zu\n", alignsize);
}
else
{
minfo("Allocated %p, size %zu\n", ret, alignsize);
}
#endif
return ret;
}