nuttx/drivers/net/e1000.c

/****************************************************************************
 * drivers/net/e1000.c
 *
 *   Copyright (C) 2011 Yu Qiang. All rights reserved.
 *   Author: Yu Qiang <yuq825@gmail.com>
 *
 * This file is a part of NuttX:
 *
 *   Copyright (C) 2011, 2014 Gregory Nutt. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>
#include <nuttx/kmalloc.h>
#include <stdint.h>
#include <stdbool.h>
#include <time.h>
#include <debug.h>
#include <errno.h>

#include <arpa/inet.h>

#include <nuttx/arch.h>
#include <nuttx/irq.h>
#include <nuttx/wdog.h>
#include <nuttx/kmalloc.h>
#include <nuttx/net/arp.h>
#include <nuttx/net/netdev.h>

#ifdef CONFIG_NET_PKT
#  include <nuttx/net/pkt.h>
#endif

#include <rgmp/pmap.h>
#include <rgmp/string.h>
#include <rgmp/stdio.h>
#include <rgmp/utils.h>
#include <rgmp/arch/pci.h>
#include <rgmp/memio.h>

#include "e1000.h"

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/* TX poll deley = 1 seconds. CLK_TCK is the number of clock ticks per second */

#define E1000_WDDELAY   (1*CLK_TCK)

/* TX timeout = 1 minute */

#define E1000_TXTIMEOUT (60*CLK_TCK)

/* This is a helper pointer for accessing the contents of the Ethernet header */

#define BUF ((struct eth_hdr_s *)e1000->netdev.d_buf)

/****************************************************************************
 * Private Types
 ****************************************************************************/

struct tx_ring
{
  struct tx_desc *desc;
  char *buf;
  int tail;      /* where to write desc */
};

struct rx_ring
{
  struct rx_desc *desc;
  char *buf;
  int head;      /* where to read */
  int tail;      /* where to release free desc */
  int free;      /* number of freed desc */
};

struct e1000_dev
{
  uint32_t phy_mem_base;
  uint32_t io_mem_base;
  uint32_t mem_size;
  int pci_dev_id;
  uint16_t pci_addr;
  unsigned char src_mac[6];
  unsigned char dst_mac[6];
  struct irq_action int_desc;
  struct tx_ring tx_ring;
  struct rx_ring rx_ring;
  struct e1000_dev *next;

  /* NuttX net data */

  bool bifup;                 /* true:ifup false:ifdown */
  WDOG_ID txpoll;             /* TX poll timer */
  WDOG_ID txtimeout;          /* TX timeout timer */

  /* This holds the information visible to uIP/NuttX */

  struct net_driver_s netdev; /* Interface understood by networking layer */
};

struct e1000_dev_head
{
  struct e1000_dev *next;
};

/****************************************************************************
 * Private Data
 ****************************************************************************/

static struct e1000_dev_head e1000_list =
{
  0
};

/****************************************************************************
 * Private Function Prototypes
 ****************************************************************************/

/* Common TX logic */

static int  e1000_transmit(struct e1000_dev *e1000);
static int  e1000_txpoll(struct net_driver_s *dev);

/* Interrupt handling */

static void e1000_receive(struct e1000_dev *e1000);

/* Watchdog timer expirations */

static void e1000_polltimer(int argc, uint32_t arg, ...);
static void e1000_txtimeout(int argc, uint32_t arg, ...);

/* NuttX callback functions */

static int e1000_ifup(struct net_driver_s *dev);
static int e1000_ifdown(struct net_driver_s *dev);
static int e1000_txavail(struct net_driver_s *dev);
#ifdef CONFIG_NET_IGMP
static int e1000_addmac(struct net_driver_s *dev, const uint8_t *mac);
static int e1000_rmmac(struct net_driver_s *dev, const uint8_t *mac);
#endif

/****************************************************************************
 * Private Functions
 ****************************************************************************/

static inline void e1000_outl(struct e1000_dev *dev, int reg, uint32_t val)
{
  writel(dev->io_mem_base+reg, val);
}

static inline uint32_t e1000_inl(struct e1000_dev *dev, int reg)
{
  return readl(dev->io_mem_base+reg);
}

/****************************** e1000 driver ********************************/

void e1000_reset(struct e1000_dev *dev)
{
  uint32_t dev_control;

  /* Reset the network controller hardware */

  dev_control = 0;
  dev_control |= (1 << 0);   /* FD-bit (Full Duplex) */
  dev_control |= (0 << 2);   /* GIOMD-bit (GIO Master Disable) */
  dev_control |= (1 << 3);   /* LRST-bit (Link Reset) */
  dev_control |= (1 << 6);   /* SLU-bit (Set Link Up) */
  dev_control |= (2 << 8);   /* SPEED=2 (1000Mbps) */
  dev_control |= (0 << 11);  /* FRCSPD-bit (Force Speed) */
  dev_control |= (0 << 12);  /* FRCDPLX-bit (Force Duplex) */
  dev_control |= (0 << 20);  /* ADVD3WUC-bit (Advertise D3 Wake Up Cap) */
  dev_control |= (1 << 26);  /* RST-bit (Device Reset) */
  dev_control |= (1 << 27);  /* RFCE-bit (Receive Flow Control Enable) */
  dev_control |= (1 << 28);  /* TFCE-bit (Transmit Flow Control Enable) */
  dev_control |= (0 << 30);  /* VME-bit (VLAN Mode Enable) */
  dev_control |= (0 << 31);  /* PHY_RST-bit (PHY Reset) */

  e1000_outl(dev, E1000_IMC, 0xFFFFFFFF);
  e1000_outl(dev, E1000_STATUS, 0x00000000);
  e1000_outl(dev, E1000_CTRL, dev_control);
  dev_control &= ~(1 << 26);  /* clear RST-bit (Device Reset) */
  e1000_outl(dev, E1000_CTRL, dev_control);
  up_mdelay(10);
  e1000_outl(dev, E1000_CTRL_EXT, 0x001401C0);
  e1000_outl(dev, E1000_IMC, 0xFFFFFFFF);
}

void e1000_turn_on(struct e1000_dev *dev)
{
  int tx_control;
  int rx_control;
  uint32_t ims = 0;

  /* turn on the controller's receive engine */

  rx_control = e1000_inl(dev, E1000_RCTL);
  rx_control |= (1 << 1);
  e1000_outl(dev, E1000_RCTL, rx_control);

  /* turn on the controller's transmit engine */

  tx_control = e1000_inl(dev, E1000_TCTL);
  tx_control |= (1 << 1);
  e1000_outl(dev, E1000_TCTL, tx_control);

  /* enable the controller's interrupts */

  e1000_outl(dev, E1000_ICR, 0xFFFFFFFF);
  e1000_outl(dev, E1000_IMC, 0xFFFFFFFF);

  ims |= 1 << 0;      /* TXDW */
  ims |= 1 << 1;      /* TXQE */
  ims |= 1 << 2;      /* LSC */
  ims |= 1 << 4;      /* RXDMT0 */
  ims |= 1 << 7;      /* RXT0 */
  e1000_outl(dev, E1000_IMS, ims);
}

void e1000_turn_off(struct e1000_dev *dev)
{
  int tx_control;
  int rx_control;

  /* turn off the controller's receive engine */

  rx_control = e1000_inl(dev, E1000_RCTL);
  rx_control &= ~(1 << 1);
  e1000_outl(dev, E1000_RCTL, rx_control);

  /* turn off the controller's transmit engine */

  tx_control = e1000_inl(dev, E1000_TCTL);
  tx_control &= ~(1 << 1);
  e1000_outl(dev, E1000_TCTL, tx_control);

  /* turn off the controller's interrupts */

  e1000_outl(dev, E1000_IMC, 0xFFFFFFFF);
}

void e1000_init(struct e1000_dev *dev)
{
  uint32_t rxd_phys;
  uint32_t txd_phys;
  uint32_t kmem_phys;
  uint32_t rx_control;
  uint32_t tx_control;
  uint32_t pba;
  int i;

  e1000_reset(dev);

  /* configure the controller's 'receive' engine */

  rx_control = 0;
  rx_control |= (0 << 1);   /* EN-bit (Enable) */
  rx_control |= (0 << 2);   /* SPB-bit (Store Bad Packets) */
  rx_control |= (0 << 3);   /* UPE-bit (Unicast Promiscuous Mode) */
  rx_control |= (1 << 4);   /* MPE-bit (Multicast Promiscuous Mode) */
  rx_control |= (0 << 5);   /* LPE-bit (Long Packet Enable) */
  rx_control |= (0 << 6);   /* LBM=0 (Loop-Back Mode) */
  rx_control |= (0 << 8);   /* RDMTS=0 (Rx Descriptor Min Threshold Size) */
  rx_control |= (0 << 10);  /* DTYPE=0 (Descriptor Type) */
  rx_control |= (0 << 12);  /* MO=0 (Multicast Offset) */
  rx_control |= (1 << 15);  /* BAM-bit (Broadcast Address Mode) */
  rx_control |= (0 << 16);  /* BSIZE=0 (Buffer Size = 2048) */
  rx_control |= (0 << 18);  /* VLE-bit (VLAN filter Enable) */
  rx_control |= (0 << 19);  /* CFIEN-bit (Canonical Form Indicator Enable) */
  rx_control |= (0 << 20);  /* CFI-bit (Canonical Form Indicator) */
  rx_control |= (1 << 22);  /* DPF-bit (Discard Pause Frames) */
  rx_control |= (0 << 23);  /* PMCF-bit (Pass MAC Control Frames) */
  rx_control |= (0 << 25);  /* BSEX=0 (Buffer Size EXtension) */
  rx_control |= (1 << 26);  /* SECRC-bit (Strip Ethernet CRC) */
  rx_control |= (0 << 27);  /* FLEXBUF=0 (Flexible Buffer size) */
  e1000_outl(dev, E1000_RCTL, rx_control);

  /* configure the controller's 'transmit' engine */

  tx_control = 0;
  tx_control |= (0 << 1);    /* EN-bit (Enable) */
  tx_control |= (1 << 3);    /* PSP-bit (Pad Short Packets) */
  tx_control |= (15 << 4);   /* CT=15 (Collision Threshold) */
  tx_control |= (63 << 12);  /* COLD=63 (Collision Distance) */
  tx_control |= (0 << 22);   /* SWXOFF-bit (Software XOFF) */
  tx_control |= (1 << 24);   /* RTLC-bit (Re-Transmit on Late Collision) */
  tx_control |= (0 << 25);   /* UNORTX-bit (Underrun No Re-Transmit) */
  tx_control |= (0 << 26);   /* TXCSCMT=0 (TxDesc Mininum Threshold) */
  tx_control |= (0 << 28);   /* MULR-bit (Multiple Request Support) */
  e1000_outl(dev, E1000_TCTL, tx_control);

  /* hardware flow control */

  pba = e1000_inl(dev, E1000_PBA);

  /* get receive FIFO size */

  pba = (pba & 0x000000ff) << 10;
  e1000_outl(dev, E1000_FCAL, 0x00C28001);
  e1000_outl(dev, E1000_FCAH, 0x00000100);
  e1000_outl(dev, E1000_FCT, 0x00008808);
  e1000_outl(dev, E1000_FCTTV, 0x00000680);
  e1000_outl(dev, E1000_FCRTL, (pba * 8 / 10) | 0x80000000);
  e1000_outl(dev, E1000_FCRTH, pba * 9 / 10);

  /* setup tx rings */

  txd_phys = PADDR((uintptr_t)dev->tx_ring.desc);
  kmem_phys = PADDR((uintptr_t)dev->tx_ring.buf);
  for (i = 0; i < CONFIG_E1000_N_TX_DESC; i++, kmem_phys += CONFIG_E1000_BUFF_SIZE)
    {
      dev->tx_ring.desc[i].base_address  = kmem_phys;
      dev->tx_ring.desc[i].packet_length = 0;
      dev->tx_ring.desc[i].cksum_offset  = 0;
      dev->tx_ring.desc[i].cksum_origin  = 0;
      dev->tx_ring.desc[i].desc_status   = 1;
      dev->tx_ring.desc[i].desc_command  = (1 << 0) | (1 << 1) | (1 << 3);
      dev->tx_ring.desc[i].special_info  = 0;
    }

  dev->tx_ring.tail = 0;
  e1000_outl(dev, E1000_TDT, 0);
  e1000_outl(dev, E1000_TDH, 0);

  /* tell controller the location, size, and fetch-policy for Tx queue */

  e1000_outl(dev, E1000_TDBAL, txd_phys);
  e1000_outl(dev, E1000_TDBAH, 0x00000000);
  e1000_outl(dev, E1000_TDLEN, CONFIG_E1000_N_TX_DESC * 16);
  e1000_outl(dev, E1000_TXDCTL, 0x01010000);

  /* setup rx rings */

  rxd_phys = PADDR((uintptr_t)dev->rx_ring.desc);
  kmem_phys = PADDR((uintptr_t)dev->rx_ring.buf);
  for (i = 0; i < CONFIG_E1000_N_RX_DESC; i++, kmem_phys += CONFIG_E1000_BUFF_SIZE)
    {
      dev->rx_ring.desc[i].base_address = kmem_phys;
      dev->rx_ring.desc[i].packet_length = 0;
      dev->rx_ring.desc[i].packet_cksum = 0;
      dev->rx_ring.desc[i].desc_status = 0;
      dev->rx_ring.desc[i].desc_errors = 0;
      dev->rx_ring.desc[i].vlan_tag = 0;
    }

  dev->rx_ring.head = 0;
  dev->rx_ring.tail = CONFIG_E1000_N_RX_DESC-1;
  dev->rx_ring.free = 0;

  /* give the controller ownership of all receive descriptors */

  e1000_outl(dev, E1000_RDH, 0);
  e1000_outl(dev, E1000_RDT, CONFIG_E1000_N_RX_DESC-1);

  /* tell controller the location, size, and fetch-policy for RX queue */

  e1000_outl(dev, E1000_RDBAL, rxd_phys);
  e1000_outl(dev, E1000_RDBAH, 0x00000000);
  e1000_outl(dev, E1000_RDLEN, CONFIG_E1000_N_RX_DESC*16);
  e1000_outl(dev, E1000_RXDCTL, 0x01010000);

  e1000_turn_on(dev);
}

/****************************************************************************
 * Function: e1000_transmit
 *
 * Description:
 *   Start hardware transmission.  Called either from the txdone interrupt
 *   handling or from watchdog based polling.
 *
 * Parameters:
 *   e1000  - Reference to the driver state structure
 *
 * Returned Value:
 *   OK on success; a negated errno on failure
 *
 * Assumptions:
 *   May or may not be called from an interrupt handler.  In either case,
 *   global interrupts are disabled, either explicitly or indirectly through
 *   interrupt handling logic.
 *
 ****************************************************************************/

static int e1000_transmit(struct e1000_dev *e1000)
{
  int tail = e1000->tx_ring.tail;
  unsigned char *cp = (unsigned char *)
      (e1000->tx_ring.buf + tail * CONFIG_E1000_BUFF_SIZE);
  int count = e1000->netdev.d_len;

  /* Verify that the hardware is ready to send another packet.  If we get
   * here, then we are committed to sending a packet; Higher level logic
   * must have assured that there is not transmission in progress.
   */

  if (!e1000->tx_ring.desc[tail].desc_status)
    {
      return -1;
    }

  /* Send the packet: address=skel->sk_dev.d_buf, length=skel->sk_dev.d_len */

  memcpy(cp, e1000->netdev.d_buf, e1000->netdev.d_len);

  /* prepare the transmit-descriptor */

  e1000->tx_ring.desc[tail].packet_length = count < 60 ? 60 : count;
  e1000->tx_ring.desc[tail].desc_status = 0;

  /* give ownership of this descriptor to the network controller */

  tail = (tail + 1) % CONFIG_E1000_N_TX_DESC;
  e1000->tx_ring.tail = tail;
  e1000_outl(e1000, E1000_TDT, tail);

  /* Enable Tx interrupts */

  /* Setup the TX timeout watchdog (perhaps restarting the timer) */

  wd_start(e1000->txtimeout, E1000_TXTIMEOUT, e1000_txtimeout, 1, (uint32_t)e1000);
  return OK;
}

/****************************************************************************
 * Function: e1000_txpoll
 *
 * Description:
 *   The transmitter is available, check if uIP has any outgoing packets ready
 *   to send.  This is a callback from devif_poll().  devif_poll() may be called:
 *
 *   1. When the preceding TX packet send is complete,
 *   2. When the preceding TX packet send timesout and the interface is reset
 *   3. During normal TX polling
 *
 * Parameters:
 *   dev  - Reference to the NuttX driver state structure
 *
 * Returned Value:
 *   OK on success; a negated errno on failure
 *
 * Assumptions:
 *   May or may not be called from an interrupt handler.  In either case,
 *   global interrupts are disabled, either explicitly or indirectly through
 *   interrupt handling logic.
 *
 ****************************************************************************/

static int e1000_txpoll(struct net_driver_s *dev)
{
  struct e1000_dev *e1000 = (struct e1000_dev *)dev->d_private;
  int tail = e1000->tx_ring.tail;

  /* If the polling resulted in data that should be sent out on the network,
   * the field d_len is set to a value > 0.
   */

  if (e1000->netdev.d_len > 0)
    {
      /* Look up the destination MAC address and add it to the Ethernet
       * header.
       */

#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
      if (IFF_IS_IPv4(e1000->netdev.d_flags))
#endif
        {
          arp_out(&e1000->netdev);
        }
#endif /* CONFIG_NET_IPv4 */

#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
      else
#endif
        {
          neighbor_out(&e1000->netdev);
        }
#endif /* CONFIG_NET_IPv6 */

      /* Send the packet */

      e1000_transmit(e1000);

      /* Check if there is room in the device to hold another packet. If not,
       * return a non-zero value to terminate the poll.
       */

      if (!e1000->tx_ring.desc[tail].desc_status)
        {
          return -1;
        }
    }

  /* If zero is returned, the polling will continue until all connections have
   * been examined.
   */

  return 0;
}

/****************************************************************************
 * Function: e1000_receive
 *
 * Description:
 *   An interrupt was received indicating the availability of a new RX packet
 *
 * Parameters:
 *   e1000  - Reference to the driver state structure
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *   Global interrupts are disabled by interrupt handling logic.
 *
 ****************************************************************************/

static void e1000_receive(struct e1000_dev *e1000)
{
  int head = e1000->rx_ring.head;
  unsigned char *cp = (unsigned char *)
      (e1000->rx_ring.buf + head * CONFIG_E1000_BUFF_SIZE);
  int cnt;

  while (e1000->rx_ring.desc[head].desc_status)
    {
      /* Here we do not handle packets that exceed packet-buffer size */

      if ((e1000->rx_ring.desc[head].desc_status & 3) == 1)
        {
          cprintf("NIC READ: Oversized packet\n");
          goto next;
        }

      /* Check if the packet is a valid size for the uIP buffer configuration */

      /* get the number of actual data-bytes in this packet */

      cnt = e1000->rx_ring.desc[head].packet_length;

      if (cnt > CONFIG_NET_ETH_MTU || cnt < 14)
        {
          cprintf("NIC READ: invalid package size\n");
          goto next;
        }

      /* Copy the data data from the hardware to e1000->netdev.d_buf.  Set
       * amount of data in e1000->netdev.d_len
       */

      /* now we try to copy these data-bytes to the UIP buffer */

      memcpy(e1000->netdev.d_buf, cp, cnt);
      e1000->netdev.d_len = cnt;

#ifdef CONFIG_NET_PKT
      /* When packet sockets are enabled, feed the frame into the packet tap */

       pkt_input(&e1000->netdev);
#endif

      /* We only accept IP packets of the configured type and ARP packets */

#ifdef CONFIG_NET_IPv4
      if (BUF->type == HTONS(ETHTYPE_IP))
        {
          nllvdbg("IPv4 frame\n");

          /* Handle ARP on input then give the IPv4 packet to the network
           * layer
           */

          arp_ipin(&e1000->netdev);
          ipv4_input(&e1000->netdev);

          /* If the above function invocation resulted in data that should be
           * sent out on the network, the field  d_len will set to a value > 0.
           */

          if (e1000->netdev.d_len > 0)
            {
              /* Update the Ethernet header with the correct MAC address */

#ifdef CONFIG_NET_IPv6
              if (IFF_IS_IPv4(e1000->netdev.d_flags))
#endif
                {
                  arp_out(&e1000->netdev);
                }
#ifdef CONFIG_NET_IPv6
              else
                {
                  neighbor_out(&e1000->netdev);
                }
#endif

              /* And send the packet */

              e1000_transmit(e1000);
            }
        }
      else
#endif
#ifdef CONFIG_NET_IPv6
      if (BUF->type == HTONS(ETHTYPE_IP6))
        {
          nllvdbg("Iv6 frame\n");

          /* Give the IPv6 packet to the network layer */

          ipv6_input(&e1000->netdev);

          /* If the above function invocation resulted in data that should be
           * sent out on the network, the field  d_len will set to a value > 0.
           */

          if (e1000->netdev.d_len > 0)
           {
              /* Update the Ethernet header with the correct MAC address */

#ifdef CONFIG_NET_IPv4
              if (IFF_IS_IPv4(e1000->netdev.d_flags))
                {
                  arp_out(&e1000->netdev);
                }
              else
#endif
#ifdef CONFIG_NET_IPv6
                {
                  neighbor_out(&e1000->netdev);
                }
#endif

              /* And send the packet */

              e1000_transmit(e1000);
            }
        }
      else
#endif
#ifdef CONFIG_NET_ARP
      if (BUF->type == htons(ETHTYPE_ARP))
        {
          arp_arpin(&e1000->netdev);

          /* If the above function invocation resulted in data that should be
           * sent out on the network, the field  d_len will set to a value > 0.
           */

          if (e1000->netdev.d_len > 0)
            {
              e1000_transmit(e1000);
            }
#endif
        }

next:
      e1000->rx_ring.desc[head].desc_status = 0;
      e1000->rx_ring.head = (head + 1) % CONFIG_E1000_N_RX_DESC;
      e1000->rx_ring.free++;
      head = e1000->rx_ring.head;
      cp = (unsigned char *)(e1000->rx_ring.buf + head * CONFIG_E1000_BUFF_SIZE);
    }
}

/****************************************************************************
 * Function: e1000_txtimeout
 *
 * Description:
 *   Our TX watchdog timed out.  Called from the timer interrupt handler.
 *   The last TX never completed.  Reset the hardware and start again.
 *
 * Parameters:
 *   argc - The number of available arguments
 *   arg  - The first argument
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *   Global interrupts are disabled by the watchdog logic.
 *
 ****************************************************************************/

static void e1000_txtimeout(int argc, uint32_t arg, ...)
{
  struct e1000_dev *e1000 = (struct e1000_dev *)arg;

  /* Then reset the hardware */

  e1000_init(e1000);

  /* Then poll uIP for new XMIT data */

  (void)devif_poll(&e1000->netdev, e1000_txpoll);
}

/****************************************************************************
 * Function: e1000_polltimer
 *
 * Description:
 *   Periodic timer handler.  Called from the timer interrupt handler.
 *
 * Parameters:
 *   argc - The number of available arguments
 *   arg  - The first argument
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *   Global interrupts are disabled by the watchdog logic.
 *
 ****************************************************************************/

static void e1000_polltimer(int argc, uint32_t arg, ...)
{
  struct e1000_dev *e1000 = (struct e1000_dev *)arg;
  int tail = e1000->tx_ring.tail;

  /* Check if there is room in the send another TX packet.  We cannot perform
   * the TX poll if he are unable to accept another packet for transmission.
   */

  if (!e1000->tx_ring.desc[tail].desc_status)
    {
      return;
    }

  /* If so, update TCP timing states and poll uIP for new XMIT data. Hmmm..
   * might be bug here.  Does this mean if there is a transmit in progress,
   * we will missing TCP time state updates?
   */

  (void)devif_timer(&e1000->netdev, e1000_txpoll);

  /* Setup the watchdog poll timer again */

  (void)wd_start(e1000->txpoll, E1000_WDDELAY, e1000_polltimer, 1, arg);
}

/****************************************************************************
 * Function: e1000_ifup
 *
 * Description:
 *   NuttX Callback: Bring up the Ethernet interface when an IP address is
 *   provided
 *
 * Parameters:
 *   dev  - Reference to the NuttX driver state structure
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

static int e1000_ifup(struct net_driver_s *dev)
{
  struct e1000_dev *e1000 = (struct e1000_dev *)dev->d_private;

  ndbg("Bringing up: %d.%d.%d.%d\n",
       dev->d_ipaddr & 0xff, (dev->d_ipaddr >> 8) & 0xff,
       (dev->d_ipaddr >> 16) & 0xff, dev->d_ipaddr >> 24);

  /* Initialize PHYs, the Ethernet interface, and setup up Ethernet interrupts */

  e1000_init(e1000);

  /* Set and activate a timer process */

  (void)wd_start(e1000->txpoll, E1000_WDDELAY, e1000_polltimer, 1, (uint32_t)e1000);

  if (e1000_inl(e1000, E1000_STATUS) & 2)
    {
      e1000->bifup = true;
    }
  else
    {
      e1000->bifup = false;
    }

  return OK;
}

/****************************************************************************
 * Function: e1000_ifdown
 *
 * Description:
 *   NuttX Callback: Stop the interface.
 *
 * Parameters:
 *   dev  - Reference to the NuttX driver state structure
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

static int e1000_ifdown(struct net_driver_s *dev)
{
  struct e1000_dev *e1000 = (struct e1000_dev *)dev->d_private;
  irqstate_t flags;

  /* Disable the Ethernet interrupt */

  flags = irqsave();

  e1000_turn_off(e1000);

  /* Cancel the TX poll timer and TX timeout timers */

  wd_cancel(e1000->txpoll);
  wd_cancel(e1000->txtimeout);

  /* Put the EMAC is its reset, non-operational state.  This should be
   * a known configuration that will guarantee the skel_ifup() always
   * successfully brings the interface back up.
   */

  //e1000_reset(e1000);

  /* Mark the device "down" */

  e1000->bifup = false;
  irqrestore(flags);

  return OK;
}

/****************************************************************************
 * Function: e1000_txavail
 *
 * Description:
 *   Driver callback invoked when new TX data is available.  This is a
 *   stimulus perform an out-of-cycle poll and, thereby, reduce the TX
 *   latency.
 *
 * Parameters:
 *   dev  - Reference to the NuttX driver state structure
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *   Called in normal user mode
 *
 ****************************************************************************/

static int e1000_txavail(struct net_driver_s *dev)
{
  struct e1000_dev *e1000 = (struct e1000_dev *)dev->d_private;
  int tail = e1000->tx_ring.tail;
  irqstate_t flags;

  /* Disable interrupts because this function may be called from interrupt
   * level processing.
   */

  flags = irqsave();

  /* Ignore the notification if the interface is not yet up */

  if (e1000->bifup)
    {
      /* Check if there is room in the hardware to hold another outgoing packet. */

      if (e1000->tx_ring.desc[tail].desc_status)
        {
          (void)devif_poll(&e1000->netdev, e1000_txpoll);
        }
    }

  irqrestore(flags);
  return OK;
}

/****************************************************************************
 * Function: e1000_addmac
 *
 * Description:
 *   NuttX Callback: Add the specified MAC address to the hardware multicast
 *   address filtering
 *
 * Parameters:
 *   dev  - Reference to the NuttX driver state structure
 *   mac  - The MAC address to be added
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

#ifdef CONFIG_NET_IGMP
static int e1000_addmac(struct net_driver_s *dev, const uint8_t *mac)
{
  /* Add the MAC address to the hardware multicast routing table */

  return OK;
}
#endif

/****************************************************************************
 * Function: e1000_rmmac
 *
 * Description:
 *   NuttX Callback: Remove the specified MAC address from the hardware multicast
 *   address filtering
 *
 * Parameters:
 *   dev  - Reference to the NuttX driver state structure
 *   mac  - The MAC address to be removed
 *
 * Returned Value:
 *   None
 *
 * Assumptions:
 *
 ****************************************************************************/

#ifdef CONFIG_NET_IGMP
static int e1000_rmmac(struct net_driver_s *dev, const uint8_t *mac)
{
  /* Add the MAC address to the hardware multicast routing table */

  return OK;
}
#endif

static irqreturn_t e1000_interrupt_handler(int irq, void *dev_id)
{
  struct e1000_dev *e1000 = (struct e1000_dev *)dev_id;

  /* Get and clear interrupt status bits */

  int intr_cause = e1000_inl(e1000, E1000_ICR);
  e1000_outl(e1000, E1000_ICR, intr_cause);

  /* not for me */

  if (intr_cause == 0)
    {
      return IRQ_NONE;
    }

  /* Handle interrupts according to status bit settings */

  /* Link status change */

  if (intr_cause & (1 << 2))
    {
      if (e1000_inl(e1000, E1000_STATUS) & 2)
        {
          e1000->bifup = true;
        }
      else
        {
          e1000->bifup = false;
        }
    }

  /* Check if we received an incoming packet, if so, call skel_receive() */

  /* Rx-descriptor Timer expired */

  if (intr_cause & (1 << 7))
    {
      e1000_receive(e1000);
    }

  /* Tx queue empty */

  if (intr_cause & (1 << 1))
    {
      wd_cancel(e1000->txtimeout);
    }

  /* Tx-descriptor Written back */

  if (intr_cause & (1 << 0))
    {
      devif_poll(&e1000->netdev, e1000_txpoll);
    }

  /* Rx-Descriptors Low */

  if (intr_cause & (1 << 4))
    {
      int tail;

      tail = e1000->rx_ring.tail + e1000->rx_ring.free;
      tail %= CONFIG_E1000_N_RX_DESC;
      e1000->rx_ring.tail = tail;
      e1000->rx_ring.free = 0;
      e1000_outl(e1000, E1000_RDT, tail);
    }

  return IRQ_HANDLED;
}

/******************************* PCI driver *********************************/

static pci_id_t e1000_id_table[] =
{
  {
    .sep =
    {
      INTEL_VENDERID, E1000_82573L
    }
  },
  {
    .sep =
    {
      INTEL_VENDERID, E1000_82540EM
    }
  },
  {
    .sep =
    {
      INTEL_VENDERID, E1000_82574L
    }
  },
  {
    .sep =
    {
      INTEL_VENDERID, E1000_82567LM
    }
  },
  {
    .sep =
    {
      INTEL_VENDERID, E1000_82541PI
    }
  },
  {
    .sep =
    {
      0, 0
    }
  }
};

static int e1000_probe(uint16_t addr, pci_id_t id)
{
  uint32_t mmio_base, mmio_size;
  uint32_t size;
  int err;
  void *kmem;
  void *omem;
  struct e1000_dev *dev;

  /* alloc e1000_dev memory */

  if ((dev = kmm_zalloc(sizeof(struct e1000_dev))) == NULL)
    {
      return -1;
    }

  /* save pci addr */

  dev->pci_addr = addr;

  /* enable device */

  if ((err = pci_enable_device(addr, PCI_BUS_MASTER)) < 0)
    {
      goto error;
    }

  /* get e1000 device type */

  dev->pci_dev_id = id.join;

  /* remap the controller's i/o-memory into kernel's address-space */

  mmio_base = pci_resource_start(addr, 0);
  mmio_size = pci_resource_len(addr, 0);
  err = rgmp_memmap_nocache(mmio_base, mmio_size, mmio_base);
  if (err)
    {
      goto error;
    }

  dev->phy_mem_base = mmio_base;
  dev->io_mem_base = mmio_base;
  dev->mem_size = mmio_size;

  /* MAC address */

  memset(dev->dst_mac, 0xFF, 6);
  memcpy(dev->src_mac, (void *)(dev->io_mem_base+E1000_RA), 6);

  /* IRQ setup */

  dev->int_desc.handler = e1000_interrupt_handler;
  dev->int_desc.dev_id = dev;
  if ((err = pci_request_irq(addr, &dev->int_desc, 0)) < 0)
    {
      goto err0;
    }

  /* Here we alloc a big block of memory once and make it
   * aligned to page boundary and multiple of page size. This
   * is because the memory can be modified by E1000 DMA and
   * should be mapped no-cache which will hugely reduce memory
   * access performance. The page size alloc will restrict
   * this bad effect only within the memory we alloc here.
   *
   * NEED FIX: the memalign may alloc memory continuous in
   * virtual address but dis-continuous in physical address
   * due to RGMP memory setup.
   */

  size = CONFIG_E1000_N_TX_DESC * sizeof(struct tx_desc) +
         CONFIG_E1000_N_TX_DESC * CONFIG_E1000_BUFF_SIZE +
         CONFIG_E1000_N_RX_DESC * sizeof(struct rx_desc) +
         CONFIG_E1000_N_RX_DESC * CONFIG_E1000_BUFF_SIZE;
  size = ROUNDUP(size, PGSIZE);
  omem = kmem = memalign(PGSIZE, size);
  if (kmem == NULL)
    {
      err = -ENOMEM;
      goto err1;
    }

  rgmp_memremap_nocache((uintptr_t)kmem, size);

  /* alloc memory for tx ring */

  dev->tx_ring.desc = (FAR struct tx_desc *)kmem;
  kmem += CONFIG_E1000_N_TX_DESC * sizeof(struct tx_desc);
  dev->tx_ring.buf = kmem;
  kmem += CONFIG_E1000_N_TX_DESC * CONFIG_E1000_BUFF_SIZE;

  /* alloc memory for rx rings */

  dev->rx_ring.desc = (FAR struct rx_desc *)kmem;
  kmem += CONFIG_E1000_N_RX_DESC * sizeof(struct rx_desc);
  dev->rx_ring.buf = kmem;

  /* Initialize the driver structure */

  dev->netdev.d_ifup    = e1000_ifup;     /* I/F up (new IP address) callback */
  dev->netdev.d_ifdown  = e1000_ifdown;   /* I/F down callback */
  dev->netdev.d_txavail = e1000_txavail;  /* New TX data callback */
#ifdef CONFIG_NET_IGMP
  dev->netdev.d_addmac  = e1000_addmac;   /* Add multicast MAC address */
  dev->netdev.d_rmmac   = e1000_rmmac;    /* Remove multicast MAC address */
#endif
  dev->netdev.d_private = dev;            /* Used to recover private state from dev */

  /* Create a watchdog for timing polling for and timing of transmisstions */

  dev->txpoll       = wd_create();        /* Create periodic poll timer */
  dev->txtimeout    = wd_create();        /* Create TX timeout timer */

  /* Put the interface in the down state.
   * e1000 reset
   */

  e1000_reset(dev);

  /* Read the MAC address from the hardware */

  memcpy(dev->netdev.d_mac.ether_addr_octet, (void *)(dev->io_mem_base+E1000_RA), 6);

  /* Register the device with the OS so that socket IOCTLs can be performed */

  err = netdev_register(&dev->netdev, NET_LL_ETHERNET);
  if (err)
    {
      goto err2;
    }

  /* insert into e1000_list */

  dev->next = e1000_list.next;
  e1000_list.next = dev;
  cprintf("bring up e1000 device: %04x %08x\n", addr, id.join);

  return 0;

err2:
  rgmp_memremap((uintptr_t)omem, size);
  free(omem);
err1:
  pci_free_irq(addr);
err0:
  rgmp_memunmap(mmio_base, mmio_size);
error:
  kmm_free(dev);
  cprintf("e1000 device probe fail: %d\n", err);
  return err;
}

/****************************************************************************
 * Public Functions
 ****************************************************************************/

void e1000_mod_init(void)
{
  pci_probe_device(e1000_id_table, e1000_probe);
}

void e1000_mod_exit(void)
{
  uint32_t size;
  struct e1000_dev *dev;

  size = CONFIG_E1000_N_TX_DESC * sizeof(struct tx_desc) +
         CONFIG_E1000_N_TX_DESC * CONFIG_E1000_BUFF_SIZE +
         CONFIG_E1000_N_RX_DESC * sizeof(struct rx_desc) +
        CONFIG_E1000_N_RX_DESC * CONFIG_E1000_BUFF_SIZE;
  size = ROUNDUP(size, PGSIZE);

  for (dev = e1000_list.next; dev != NULL; dev = dev->next)
    {
      netdev_unregister(&dev->netdev);
      e1000_reset(dev);
      wd_delete(dev->txpoll);
      wd_delete(dev->txtimeout);
      rgmp_memremap((uintptr_t)dev->tx_ring.desc, size);
      free(dev->tx_ring.desc);
      pci_free_irq(dev->pci_addr);
      rgmp_memunmap((uintptr_t)dev->io_mem_base, dev->mem_size);
      kmm_free(dev);
    }

  e1000_list.next = NULL;
}